ホーム パワー・マネージメント AC/DC & DC/DC controllers (external FET)

TPS40007-DIE

最終購入段階

低入力、高効率、同期整流降圧コントローラ、TPS40007-DIE

製品詳細

Vin (min) (V) 2.25 Vin (max) (V) 5.5 Iout (max) (A) 15 Operating temperature range (°C) 25 to 25 Control mode Voltage mode Rating Military Vout (min) (V) 0.7 Vout (max) (V) 4 Iq (typ) (A) 0.0015
Vin (min) (V) 2.25 Vin (max) (V) 5.5 Iout (max) (A) 15 Operating temperature range (°C) 25 to 25 Control mode Voltage mode Rating Military Vout (min) (V) 0.7 Vout (max) (V) 4 Iq (typ) (A) 0.0015
DIESALE (TD) See data sheet
  • Low Output Voltage
  • Predictive Gate Drive N-Channel MOSFET
    Drivers for Higher >Efficiency
  • Externally Adjustable Soft-Start and
    Overcurrent Limit
  • Frequency Voltage-Mode Control
  • Source/Sink With VOUT Prebias
  • Thermal Shutdown
  • Internal Boostrap Diode
  • Low Output Voltage
  • Predictive Gate Drive N-Channel MOSFET
    Drivers for Higher >Efficiency
  • Externally Adjustable Soft-Start and
    Overcurrent Limit
  • Frequency Voltage-Mode Control
  • Source/Sink With VOUT Prebias
  • Thermal Shutdown
  • Internal Boostrap Diode

The TPS40007-DIE is a controller for low-voltage, non-isolated synchronous buck regulators. This controller drives an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.

The current-limit threshold is adjustable with a single resistor connected to the device. The TPS40007-DIE controller implements a closed-loop soft-start function.

The TPS40007-DIE is a controller for low-voltage, non-isolated synchronous buck regulators. This controller drives an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.

The current-limit threshold is adjustable with a single resistor connected to the device. The TPS40007-DIE controller implements a closed-loop soft-start function.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LOW INPUT, HIGH-EFFICIENCY SYNCHRONOUS BUCK CONTROLLER, TPS40007-DIE データシート 2013年 11月 1日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 ダウンロード
DIESALE (TD)

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ