TPS40130
ドライバ内蔵、2 チャネル、マルチフェーズ降圧 DC/DC コントローラ
データシート
TPS40130
- Two-Phase Interleaved Operation
- 3-V to 40-V Power Stage Operation Range
- Supports Up to 6-V VOUT With External Divider
- Requires VIN5 @ 50 mA, Typical, Depending on External MOSFETs and Switching Frequency
- 1-µA Shutdown Current
- Programmable Switching Frequency up to 1 MHz/Phase
- Current Mode Control with Forced Current Sharing
- Better than 1% Internal 0.7-V Reference
- Resistive Divider Sets Direct Output Over Voltage Threshold and Sets Input Undervoltage Lockout
- True Remote Sensing Differential Amplifier
- Resistive or Inductor’s DCR Current Sensing
- 30-pin TSSOP or 32-Pin QFN Packages
- Can Be Used with TPS40120 to Provide a 6-Bit Digitally Controlled Output
- APPLICATIONS
- Graphic Cards
- Internet Servers
- Networking Equipment
- Telecommunications Equipment
- DC Power Distributed Systems
The TPS40130 is a two-phase synchronous buck controller that is optimized for low-output voltage, high-output current applications powered from a supply between 3 V and 40 V. A multi-phase con- verter offers several advantages over a single power stage including lower current ripple on the input and output capacitors, faster transient response to load steps, improved power handling capabilities, and higher system efficiency.
Each phase can be operated at a switching frequency up to 1 MHz, resulting in an effective ripple frequency of up to 2 MHz at the input and the output. The two phases operates 180 degrees out-of-phase.
技術資料
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示 種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | 2- PHASE CONTROLLER データシート (Rev. B) | 2005年 7月 27日 | |||
* | エラッタ | TPS40130 Enable Reference Voltage Interaction Errata | 2006年 6月 17日 | |||
ユーザー・ガイド | TPS40130EVM-001 -12-Vin, 1.5-Vout, 40-A Two Phase Synchronous Buck Converter | 2004年 9月 23日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
シミュレーション・ツール
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。
設計とシミュレーション向けの環境である PSpice for TI (...)
設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
TSSOP (DBT) | 30 | オプションの表示 |
VQFN (RHB) | 32 | オプションの表示 |
購入と品質
記載されている情報:
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
記載されている情報:
- ファブの拠点
- 組み立てを実施した拠点