ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧 コントローラ (外部スイッチ)

TPS40428

アクティブ

デュアル出力、2 相、スタッカブル PMBus 同期整流・降圧ドライバレス・コントローラ

製品詳細

Vin (min) (V) 4.5 Vin (max) (V) 20 Vout (min) (V) 0.6 Vout (max) (V) 5 Iout (max) (A) 40 Iq (typ) (mA) 18 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1500 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, PMBus, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, Synchronous Rectification, UVLO adjustable, Voltage Margining Operating temperature range (°C) -40 to 125 Regulated outputs (#) 2 Number of phases 2 Rating Catalog Control mode Voltage mode Type Controller
Vin (min) (V) 4.5 Vin (max) (V) 20 Vout (min) (V) 0.6 Vout (max) (V) 5 Iout (max) (A) 40 Iq (typ) (mA) 18 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1500 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, PMBus, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, Synchronous Rectification, UVLO adjustable, Voltage Margining Operating temperature range (°C) -40 to 125 Regulated outputs (#) 2 Number of phases 2 Rating Catalog Control mode Voltage mode Type Controller
VQFN (RHA) 40 36 mm² 6 x 6
  • Smart Power Mode in Factory Default (Compatible with TI Smart Power Stage CSD95378B and Pin-for-Pin Equivalent to TPS40425 – Non-Smart Power Mode in Factory Default)
  • Single Supply Operation: 4.5 V to 20 V
  • VOUT from 0.6 V
  • Dual or Multi-Phase Synchronous Buck Controller
  • Individual High-Speed AVS Interface
  • Fast Transient Response
  • Stackable up to Four Phases
    • 2-, 3-, or 4-Phase Interleaved Phase Shifts
    • Accurate Current Sharing
  • PMBus Interface Capability
    • Margining Up/Down with 2-mV Step
    • Programmable Fault Limit and Response
    • ±0.8% VOUT
    • Accuracy Current Monitoring
    • ±3°C External Temperature Monitoring In Smart Power Mode
    • Programmable UVLO ON/OFF Thresholds
    • Programmable Soft-Start Time, Turn-On Delay, and Turn-Off Delay
  • On-Chip Non-Volatile Memory (NVM) to Store Custom Configurations
  • 0.6-V Reference Voltage with 0.5% Accuracy from –40°C to 125°C
  • Programmable ƒSW from 200 kHz to 1.5 MHz
  • Supports Pre-biased Output
  • Differential Remote Sensing
  • Synchronization to an Extermal Clock
  • OC/OV/UV/OT Fault Protection
  • 40-Pin, 6 mm × 6 mm, QFN Package
  • Smart Power Mode in Factory Default (Compatible with TI Smart Power Stage CSD95378B and Pin-for-Pin Equivalent to TPS40425 – Non-Smart Power Mode in Factory Default)
  • Single Supply Operation: 4.5 V to 20 V
  • VOUT from 0.6 V
  • Dual or Multi-Phase Synchronous Buck Controller
  • Individual High-Speed AVS Interface
  • Fast Transient Response
  • Stackable up to Four Phases
    • 2-, 3-, or 4-Phase Interleaved Phase Shifts
    • Accurate Current Sharing
  • PMBus Interface Capability
    • Margining Up/Down with 2-mV Step
    • Programmable Fault Limit and Response
    • ±0.8% VOUT
    • Accuracy Current Monitoring
    • ±3°C External Temperature Monitoring In Smart Power Mode
    • Programmable UVLO ON/OFF Thresholds
    • Programmable Soft-Start Time, Turn-On Delay, and Turn-Off Delay
  • On-Chip Non-Volatile Memory (NVM) to Store Custom Configurations
  • 0.6-V Reference Voltage with 0.5% Accuracy from –40°C to 125°C
  • Programmable ƒSW from 200 kHz to 1.5 MHz
  • Supports Pre-biased Output
  • Differential Remote Sensing
  • Synchronization to an Extermal Clock
  • OC/OV/UV/OT Fault Protection
  • 40-Pin, 6 mm × 6 mm, QFN Package

The TPS40428 device is a PMBus, synchronous buck, driverless controller. It operates in smart power mode with factory default settings, and it can operate in non-smart power mode after PMBus programing and power reboot. It can be configured for dual-output or 2-phase operation. It is also stackable up to 4 phases to support load current as high as 120 A. Interleaved phase shift for 2-. 3-, or 4-phases reduce the input and output ripples therefore reducing input and output capacitance.

The wide input voltage range can support 5-V and 12-V intermediate supply buses. The 0.5% reference voltage satisfies the need of precision voltage to the modern ASICs.

Using the PMBus standard, the TPS40428 device can program reference voltage, fault limit, UVLO threshold, soft-start time and turn-on and turn-off delay.

In addition, the device implements an accurate measurement system to monitor the output voltages, currents and temperatures for individual channels.

For all available packages, see the orderable addendum at the end of the data sheet.

The TPS40428 device is a PMBus, synchronous buck, driverless controller. It operates in smart power mode with factory default settings, and it can operate in non-smart power mode after PMBus programing and power reboot. It can be configured for dual-output or 2-phase operation. It is also stackable up to 4 phases to support load current as high as 120 A. Interleaved phase shift for 2-. 3-, or 4-phases reduce the input and output ripples therefore reducing input and output capacitance.

The wide input voltage range can support 5-V and 12-V intermediate supply buses. The 0.5% reference voltage satisfies the need of precision voltage to the modern ASICs.

Using the PMBus standard, the TPS40428 device can program reference voltage, fault limit, UVLO threshold, soft-start time and turn-on and turn-off delay.

In addition, the device implements an accurate measurement system to monitor the output voltages, currents and temperatures for individual channels.

For all available packages, see the orderable addendum at the end of the data sheet.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS40428 Dual Output, 2-Phase, Stackable PMBus Synchronous Buck Driverless Controller with Adaptive Voltage Scaling (AVS) Bus データシート (Rev. A) PDF | HTML 2014年 7月 22日
アプリケーション・ノート Multiphase Buck Design from Start to Finish, Part 1 (Rev. B) 2021年 4月 7日
アプリケーション・ノート SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC 2016年 2月 22日
Analog Design Journal MOSFET power losses and how they affect power-supply efficiency 2016年 1月 26日
技術記事 Select the correct PMBus POL solution for your application PDF | HTML 2015年 8月 3日
EVM ユーザー ガイド (英語) Using the PWR594 EVM Dual Output DC/DC Analog with PMBus Interface 2014年 7月 30日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS40428EVM-594 — TPS40428 EVM デュアル出力、PMBus インターフェイス付き

The TPS40428EVM evaluation module (EVM) allows users to evaluate the TPS40428. The TPS40428 is a PMBus, synchronous buck, driverless controller. It can be configured for dual-output or 2-phase operation.  The TPS40428EVM is designed to demonstrate the TPS40428 in a typical, dual-output (...)

ユーザー ガイド: PDF
アプリケーション・ソフトウェアとフレームワーク

FUSION_DIGITAL_POWER_DESIGNER — デジタル電源用ソフトウェア

Fusion Digital Power™ は、TI のデジタル電源コントローラとシーケンサ / ヘルス・モニタの構成および監視を行うためのグラフィカル・ユーザー・インターフェイス (GUI) ソフトウェアです。アプリケーションは PMBus プロトコルを使用し、TI の USB アダプタとシリアル・バス経由でデバイスとの通信を行います。
シミュレーション・モデル

TPS40428 PSpice Transient Model

SLUM434.ZIP (247 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP9042 — 高効率デュアル 30A またはシングル 60A デジタル PoL(ポイント・オブ・ロード)のリファレンス・デザイン

The PMP9042 reference design combines digital TPS40428 controller with CSD95378B for a dual 30A or single 60A point-of-load . The design is size-optimized in a tiny 1"x1" area (25.4mm x 25.4mm). The PMP9042 demonstrates a  high efficiency, high density point-of-load with excellent thermal (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP4482 — 12V 入力 2 相 50A インテリジェント電源モジュール・オンボードのリファレンス・デザイン

PMP4482 is a full featured power module reference design including output UV/OV/OC and input voltage UV protection. It provides 0.7~2V output voltage with load current up to 50A by using TPS40428 and CSD95372. The built-in temperature and current sensors improve the accuracy and eliminate discrete (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP11184 — 高効率、高電力密度 1V/120A/30A/30A(4+1+1)リファレンス・デザイン、ASIC プロセッサ用

PMP11184 is a chipset solution for high current ASIC core rail regulation. It utilizes TPS53647 4-phase controller for 120A high current rail, which employs  DCAP+ control for fast transient response and TI's proprietary AutoBalance for tight steady and dynamic phase-to-phase current balance. (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9475 — Xilinx Virtex® Ultrascale™ FPGA パワー・ソリューション

12V 入力の PMP9475 リファレンス・デザインでは、Xilinx 製の Virtex® UltraScale™ FPGA ファミリに電力を供給するために必要とされるすべての電源レールを、コンパクトで高効率のデザインで実装できます。  このデザインでは、設計/構成の容易さと、重要なレールの遠隔測定を目的として、複数の TI 製 PMBus ポイント・オブ・ロード(POL)電圧レギュレータを使用しています。1 個の UCD90120A を採用して、フレキシブルなパワーアップ/パワーダウン・シーケンシングを実現するとともに、PMBus (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP10896 — 完全な PMBus 電源システム、企業向イーサネット・スイッチ用、リファレンス・デザイン

3 系統の ASIC/FPGA コア電圧、DDR3 コア・メモリ電圧、高性能イーサネット・スイッチで使用されている補助電圧に対応する、包括的な PMBus 電源システム。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9131 — 高密度 160A(210A ピーク)4 相 DC-DC 降圧コンバータ、PMBus インターフェイス付き、リファレンス・デザイン

周波数が予測可能な場合や、外部クロックに同期する必要がある場合に、CPU、メモリ、ASIC の各アプリケーションで使用することを想定した、固定周波数の電圧モード制御です。  4 つの大電流同期出力段から、これらのアプリケーションで必要とされる大電流を低損失で供給します。マルチフェーズにより、出力リップルを打ち消し、特定のスイッチング周波数に対して実質的により広い帯域幅の制御を実現します。PMP9131 では、電気的テストを容易に実行できること、および PMBus (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP10000 — 60A 2 相 PMBus 同期整流降圧コンバータ、リファレンス・デザイン

このデザインは、TPS40428 PMBus ドライバレス PWM コントローラと CSD95372B スマート・パワー・ステージを搭載した、60A の二相 同期整流・降圧コンバータに対応しています。このデザインは、10V ~ 14V の入力を受け入れ、60A 出力で 1V を供給します。PMBus 採用の設計により、エンタープライズ・ストレージ/NAS/SAN、イーサネット・スイッチ、光ネットワーク、基地局で使用されている大電力 ASIC 電源のプログラム、構成、制御、シーケンシング、電圧マージン測定、アダプティブ電圧スケーリング(AVS)、高精度の電流/電圧/温度監視を実行できます。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9444 — Xilinx® Ultrascale® Kintex™ FPGA パワー・ソリューション

PMP9444 リファレンス・デザインでは、Xilinx 製の Kintex UltraScale FPGA ファミリに電力を供給するために必要とされるすべての電源レールを実装できます。  2 個の UCD90120A を採用して、フレキシブルなパワーアップ/ダウン・シーケンシングを実現するとともに、PMBus インターフェイス経由で電圧監視、電流監視、電圧マージン測定も実施します。  このリファレンス・デザインでは、12V 入力を使用します。
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VQFN (RHA) 40 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ