ホーム パワー・マネージメント AC/DC & DC/DC controllers (external FET)

TPS51611

アクティブ

IMVP6.5™ CPU/GPU の Vcore 向け、単相、D-CAP+™ モード、降圧コントローラ

製品詳細

Vin (min) (V) 3 Vin (max) (V) 28 Iout (max) (A) 60 Operating temperature range (°C) -10 to 105 Control mode D-CAP+ Rating Catalog Vout (min) (V) 0.3 Vout (max) (V) 1.5 Iq (typ) (A) 0.0018 Duty cycle (max) (%) 50
Vin (min) (V) 3 Vin (max) (V) 28 Iout (max) (A) 60 Operating temperature range (°C) -10 to 105 Control mode D-CAP+ Rating Catalog Vout (min) (V) 0.3 Vout (max) (V) 1.5 Iq (typ) (A) 0.0018 Duty cycle (max) (%) 50
VQFN (RHB) 32 25 mm² 5 x 5
  • 3-V to 28-V Conversion Voltage Range
  • Minimal External Parts Count
  • Full IMVP-6.5 Compliance, Including VR_TT and Output Current Monitor
  • Supports 7-Bit VID Code for CPU and GPU
  • 0.3-V to 1.5-V Output Voltage Range
  • 0.5% VCORE Accuracy Over Line/Load/Temp
  • Optimized Efficiency at Light and Heavy Loads
  • Patented Output Overshoot Reduction Reduces Output Capacitance
  • Adjustable Voltage Positioning
  • Selectable 250/300/350/500 kHz Frequency
  • 8-Level Selectable Current Limit
  • Gate Drivers with 2-A Driving Capability w/Integrated Boost Diode
  • Available in 5 mm × 5 mm, 32-Pin QFN PowerPAD Package
  • APPLICATIONS
    • IMVP-6.5 Single-Phase CPU and Graphics (Render) VCORE Applications
  • 3-V to 28-V Conversion Voltage Range
  • Minimal External Parts Count
  • Full IMVP-6.5 Compliance, Including VR_TT and Output Current Monitor
  • Supports 7-Bit VID Code for CPU and GPU
  • 0.3-V to 1.5-V Output Voltage Range
  • 0.5% VCORE Accuracy Over Line/Load/Temp
  • Optimized Efficiency at Light and Heavy Loads
  • Patented Output Overshoot Reduction Reduces Output Capacitance
  • Adjustable Voltage Positioning
  • Selectable 250/300/350/500 kHz Frequency
  • 8-Level Selectable Current Limit
  • Gate Drivers with 2-A Driving Capability w/Integrated Boost Diode
  • Available in 5 mm × 5 mm, 32-Pin QFN PowerPAD Package
  • APPLICATIONS
    • IMVP-6.5 Single-Phase CPU and Graphics (Render) VCORE Applications

The TPS51611 is a fully IMVP-6.5 compliant single-phase synchronous buck controller with integrated gate drivers. Advanced control features such as D-CAP+™ architecture and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51611 supports both the Intel mobile CPU and integrated graphics modes with the integrated 7-bit DAC in Calpella platform. The TPS51611 provides the full complement of IMVP-6.5 I/O including VR_TT, DPRSLPVR, and IMON. Adjustable control of VCORE slew rate and voltage positioning round out the IMVP-6.5 features. In addition, the TPS51611 includes two high-current MOSFET gate drivers to drive external FETs with low switching loss. The TPS51611 is available in the 5 mm × 5 mm, 32-pin QFN and is rated to operate from –10°C to 105°C

The TPS51611 is a fully IMVP-6.5 compliant single-phase synchronous buck controller with integrated gate drivers. Advanced control features such as D-CAP+™ architecture and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51611 supports both the Intel mobile CPU and integrated graphics modes with the integrated 7-bit DAC in Calpella platform. The TPS51611 provides the full complement of IMVP-6.5 I/O including VR_TT, DPRSLPVR, and IMON. Adjustable control of VCORE slew rate and voltage positioning round out the IMVP-6.5 features. In addition, the TPS51611 includes two high-current MOSFET gate drivers to drive external FETs with low switching loss. The TPS51611 is available in the 5 mm × 5 mm, 32-pin QFN and is rated to operate from –10°C to 105°C

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Single Phase, D-CAP+ Synchronous Buck Controller データシート 2008年 11月 24日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 ダウンロード
VQFN (RHB) 32 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ