TPS5210
- ±1% Reference Over Full Operating Temperature Range
- Synchronous Rectifier Driver for Greater Than 90% Efficiency
- Programmable Reference Voltage Range of 1.3 V to 3.5 V
- User-Selectable Hysteretic Type Control
- Droop Compensation for Improved Load Transient Regulation
- Adjustable Overcurrent Protection
- Programmable Softstart
- Overvoltage Protection
- Active Deadtime Control
- Power Good Output
- Internal Bootstrap Schottky Diode
- Low Supply Current...3-mA Typ
The TPS5210 is a synchronous-buck regulator controller which provides an accurate, programmable supply voltage to microprocessors. An internal 5-bit DAC is used to program the reference voltage to within a range of 1.3V to 3.5 V. The output voltage can be set to be equal to the reference voltage or to some multiple of the reference voltage. A hysteretic controller with user-selectable hysteresis and programmable droop compensation is used to dramatically reduce overshoot and undershoot caused by load transients. Propagation delay from the comparator inputs to the output drivers is less than 250 ns. Overcurrent shutdown and crossover protection for the output drivers combine to eliminate destructive faults in the output FETs. The softstart current source is proportional to the reference voltage, thereby eliminating variation of the softstart timing when changes are made to the output voltage. PWRGD monitors the output voltage and pulls the open-collector output low when the output drops 7% below the nominal output voltage. An overvoltage circuit disables the output drivers if the output voltage rises 15% above the nominal value. The inhibit pin can be used to control power sequencing. Inhibit and undervoltage lockout assures the 12-V supply voltage and system supply voltage (5V or 3.3 V) are within proper operating limits before the controller starts. Single-supply (12 V) operation is easily accomplished using a low-current divider for the required 5-V signals. The output driver circuits include 2-A drivers with internal 8-V gate-voltage regulators. The high-side driver can be configured either as a ground-referenced driver or as a floating bootstrap driver. The TPS5210 is available in a 28-pin SOIC package and a 28-pin TSSOP PowerPADTM package. It operates over a junction temperature range of 0°C to 125°C.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | Programmable Synchronous-Buck Regulator Controller データシート (Rev. A) | 1999年 5月 11日 | |||
アプリケーション・ノート | Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) | 2019年 3月 12日 | ||||
アプリケーション・ノート | Power Supply Sequencing Solutions for Dual Supply Voltage DSPs (Rev. A) | 2000年 7月 5日 | ||||
EVM ユーザー ガイド (英語) | High Performance 45-A Synchronous Buck EVM Using The TPS5210 | 1999年 10月 28日 | ||||
アプリケーション概要 | DC-to-DC Converter Parallel Operation Using Droop Compensation of TPS5210 | 1999年 6月 23日 | ||||
アプリケーション・ノート | Designing Fast Response Synchronous Buck Regulators Using the TPS5210 | 1999年 3月 10日 | ||||
EVM ユーザー ガイド (英語) | High Performance Synchronous Buck EVM Using The TPS5210 | 1999年 3月 10日 | ||||
ユーザー・ガイド | High Performance VRM Using The TPS5210 | 1999年 3月 10日 | ||||
アプリケーション・ノート | Understanding Buck Power Stages In Switchmode Power Supplies | 1999年 3月 4日 | ||||
アプリケーション概要 | DC-to-DC Converter Derives 1.2V from 12V | 1999年 2月 24日 | ||||
アプリケーション概要 | Extended Output Voltage Adjustment Using the TPS5210 | 1998年 12月 10日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
パッケージ | ピン数 | ダウンロード |
---|---|---|
HTSSOP (PWP) | 28 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点