TPS54386-Q1

Name: TPS54386-Q1
Brand: TI
SKU: TPS54386-Q1
Price: 1.114 USD

アクティブ

車載向け、4.5V ～ 28V、600kHz 固定周波数、デュアル、3A 降圧コンバータ

ご注文はこちら

データシート

document-pdfAcrobat 3-A Dual Non-Synchronous Converter With Integrated Hi-Side MOSFET データシート (Rev. A) (英語)

TPS54386-Q1

アクティブ

データシート

ご注文はこちら

製品詳細

Iout (max) (A)

3

Vin (min) (V)

4.5

Vin (max) (V)

28

Type

Converter

Switching frequency (min) (kHz)

600

Switching frequency (max) (kHz)

600

Features

Enable, Phase Interleaving

Control mode

current mode

Vout (min) (V)

0.8

Vout (max) (V)

25.2

Rating

Automotive

Operating temperature range (°C)

-40 to 105

Iout (max) (A)

3

Vin (min) (V)

4.5

Vin (max) (V)

28

Type

Converter

Switching frequency (min) (kHz)

600

Switching frequency (max) (kHz)

600

Features

Enable, Phase Interleaving

Control mode

current mode

Vout (min) (V)

0.8

Vout (max) (V)

25.2

Rating

Automotive

Operating temperature range (°C)

-40 to 105

HTSSOP (PWP)

14

32 mm² 5 x 6.4

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 2: –40°C to +105°C Ambient Operating Temperature
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C3B
4.5-V to 28-V Input Range
Output Voltage Range 0.8 V to 90% of Input Voltage
Output Current Up to 3 A
Fixed Switching Frequency: 600 kHz
Three Selectable Levels of Overcurrent Protection (Output 2)
0.8-V 1.5% Voltage Reference
2.1-ms Internal Soft Start
Dual PWM Outputs 180° Out-of-Phase
Ratiometric or Sequential Startup Modes Selectable by a Single Pin
85-mΩ Internal High-Side MOSFETs
Current Mode Control
Internal Compensation
Pulse-by-Pulse Overcurrent Protection
Thermal Shutdown Protection at 148°C
14-Pin PowerPAD HTSSOP Package

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 2: –40°C to +105°C Ambient Operating Temperature
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C3B
4.5-V to 28-V Input Range
Output Voltage Range 0.8 V to 90% of Input Voltage
Output Current Up to 3 A
Fixed Switching Frequency: 600 kHz
Three Selectable Levels of Overcurrent Protection (Output 2)
0.8-V 1.5% Voltage Reference
2.1-ms Internal Soft Start
Dual PWM Outputs 180° Out-of-Phase
Ratiometric or Sequential Startup Modes Selectable by a Single Pin
85-mΩ Internal High-Side MOSFETs
Current Mode Control
Internal Compensation
Pulse-by-Pulse Overcurrent Protection
Thermal Shutdown Protection at 148°C
14-Pin PowerPAD HTSSOP Package

The TPS54386-Q1 are dual-output, non-synchronous buck converters capable of supporting 3-A output applications that operate from a 4.5-V to 28-V input supply voltage, and require output voltages between 0.8 V and 90% of the input voltage.

With an internally-determined operating frequency, soft-start time, and control-loop compensation, these converters provide many features with a minimum of external components. Channel-1 overcurrent protection is set at 4.5 A, whereas the channel-2 overcurrent protection level is selected by connecting a pin to ground, to BP, or left floating. The setting levels are used to allow for scaling of external components for applications that do not need the full load capability of both outputs.

The outputs may be enabled independently, or may be configured to allow either ratiometric or sequential start-up sequencing. Additionally, the two outputs may be powered from different sources.

The TPS54386-Q1 are dual-output, non-synchronous buck converters capable of supporting 3-A output applications that operate from a 4.5-V to 28-V input supply voltage, and require output voltages between 0.8 V and 90% of the input voltage.

With an internally-determined operating frequency, soft-start time, and control-loop compensation, these converters provide many features with a minimum of external components. Channel-1 overcurrent protection is set at 4.5 A, whereas the channel-2 overcurrent protection level is selected by connecting a pin to ground, to BP, or left floating. The setting levels are used to allow for scaling of external components for applications that do not need the full load capability of both outputs.

The outputs may be enabled independently, or may be configured to allow either ratiometric or sequential start-up sequencing. Additionally, the two outputs may be powered from different sources.

open-in-new

その他の AC/DC & DC/DC converters (integrated FET) を検索

ダウンロード字幕付きのビデオを表示ビデオ

技術資料

star

=TI が選定したこの製品の主要ドキュメント

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。

1 をすべて表示

	種類	タイトル		最新の英語版をダウンロード		日付
*	データシート	3-A Dual Non-Synchronous Converter With Integrated Hi-Side MOSFET データシート (Rev. A)				2012年 4月 29日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS54386EVM — TPS54386、13.2V 入力、5V および 3.3V デュアル出力、2A 評価モジュール

The TPS54386EVM evaluation module (EVM) is a dual non-synchronous buck converter providing fixed 5.0-V and 3.3-V output at up to 2 A each from a 12-V input bus. The EVM is designed to start up from a single supply, so no additional bias voltage is required for start-up. The module uses the (...)

ユーザーガイド: PDF | HTML