ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

TPS548A20

アクティブ

1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ

製品詳細

Vin (min) (V) 4.5 Vin (max) (V) 20 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iout (max) (A) 15 Iq (typ) (mA) 1.35 Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Adjustable current limit, Enable, Frequency synchronization, Phase Interleaving, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode D-CAP3 Duty cycle (max) (%) 50 Type Converter
Vin (min) (V) 4.5 Vin (max) (V) 20 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iout (max) (A) 15 Iq (typ) (mA) 1.35 Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Adjustable current limit, Enable, Frequency synchronization, Phase Interleaving, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode D-CAP3 Duty cycle (max) (%) 50 Type Converter
VQFN-CLIP (RVE) 28 15.75 mm² 4.5 x 3.5
  • Integrated SWIFT™ 9.9-mΩ and 4.3-mΩ MOSFETs Support 15-A Continuous IOUT
  • Wide Conversion Input Voltage Range: 1.5 V to 20 V (with Snubber)
  • Output Voltage Range from 0.6 V to 5.5 V
  • Supports All Ceramic Output Capacitors
  • Reference Voltage: 600 mV with ±0.5% Tolerance from –40°C to 85°C ambient temperature
  • D-CAP3™ Control Mode With Fast Load-Step Response
  • Hiccup Over Current Protection
  • Auto-Skipping Eco-Mode™ for High Light-Load Efficiency
  • FCCM for Tight Output Ripple and Voltage Tolerance Requirements
  • Pre-charged Startup Capability
  • Eight Selectable Frequency Settings from
    200 kHz to 1 MHz
  • 4.5 mm x 3.5 mm, 28-Pin, VQFN-CLIP Package
  • Supported at the WEBENCH™ Design Center
  • Integrated SWIFT™ 9.9-mΩ and 4.3-mΩ MOSFETs Support 15-A Continuous IOUT
  • Wide Conversion Input Voltage Range: 1.5 V to 20 V (with Snubber)
  • Output Voltage Range from 0.6 V to 5.5 V
  • Supports All Ceramic Output Capacitors
  • Reference Voltage: 600 mV with ±0.5% Tolerance from –40°C to 85°C ambient temperature
  • D-CAP3™ Control Mode With Fast Load-Step Response
  • Hiccup Over Current Protection
  • Auto-Skipping Eco-Mode™ for High Light-Load Efficiency
  • FCCM for Tight Output Ripple and Voltage Tolerance Requirements
  • Pre-charged Startup Capability
  • Eight Selectable Frequency Settings from
    200 kHz to 1 MHz
  • 4.5 mm x 3.5 mm, 28-Pin, VQFN-CLIP Package
  • Supported at the WEBENCH™ Design Center

The TPS548A20 is a small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode. The device offers ease-of-use and low bill-of-material count for space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.6-V reference, and an integrated boost switch. Competitive features include very-low external-component count, fast load-transient response, auto-skip mode operation, internal soft-start control, and no requirement for compensation.

A forced continuous conduction mode helps meet tight voltage regulation accuracy requirements for performance DSPs and FPGAs. The TPS548A20 is available in a 28-pin VQFN-CLIP package and is specified from –40°C to 125°C ambient temperature.

The TPS548A20 is a small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode. The device offers ease-of-use and low bill-of-material count for space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.6-V reference, and an integrated boost switch. Competitive features include very-low external-component count, fast load-transient response, auto-skip mode operation, internal soft-start control, and no requirement for compensation.

A forced continuous conduction mode helps meet tight voltage regulation accuracy requirements for performance DSPs and FPGAs. The TPS548A20 is available in a 28-pin VQFN-CLIP package and is specified from –40°C to 125°C ambient temperature.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
TPS549A20 アクティブ PMBus 対応、1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ Upgraded PMBus converter with light load efficiency and voltage margining.
比較対象デバイスと同等の機能で、ピン互換製品
TPS53513 アクティブ 1.5V ~ 18V、8A 同期整流 SWIFT™ 降圧コンバータ Lower current part with light load efficiency.
TPS53515 アクティブ 1.5V ~ 18V、12A 同期整流 SWIFT™ 降圧コンバータ Lower current part with light load efficiency and over-current protection.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
10 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS548A20 1.5-V to 20-V (4.5-V to 25-V Bias) Input, 15-A Synchronous Step-Down SWIFT™ Converter データシート (Rev. A) PDF | HTML 2015年 12月 2日
Analog Design Journal Control-Mode Quick Reference Guide (Rev. B) PDF | HTML 2023年 8月 29日
EVM ユーザー ガイド (英語) TPS548A20 SWIFT™ Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 8月 19日
アプリケーション・ノート DC/DC Converter Solutions for Hardware Accelerators in Data Center Applications (Rev. A) PDF | HTML 2021年 5月 4日
セレクション・ガイド Buck Converter Quick Reference Guide (Rev. B) 2021年 4月 8日
アプリケーション・ノート Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) PDF | HTML 2020年 1月 8日
アプリケーション・ノート Unified Ground Connection Recommendation on TPS53K- Integrated FET-Converter Dev 2017年 1月 25日
Analog Design Journal How to select input capacitors for a buck converter 2016年 4月 26日
アプリケーション・ノート Accuracy-Enhanced Ramp-Generation Design for D-CAP3 Modulation (Rev. A) 2016年 4月 25日
アプリケーション・ノート SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC 2016年 2月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS548A20EVM-737 — TPS548A20 DCAP3 高効率 15A 同期整流降圧コンバータ、評価モジュール

TPS548A20EVM-737 は、TPS548A20 降圧コンバータの動作と機能を、ユーザーが容易に評価およびテストできる設計を採用しています。この評価基板は、4.5mm x 3.5mm の QFN パッケージに封止済みで、1.5V ~ 20V の入力電圧を 1.2V のレギュレーション済み出力電圧に変換し、最大 15A の出力電流を供給します。この基板は各種ジャンパを搭載しており、各種機能のイネーブル (有効化) とモード選択の容易な評価に使用できます。また、複数のテスト・ポイントも実装しているので、重要な波形のプローブ作業に関する利便性が向上します。

ユーザー ガイド: PDF | HTML
アプリケーション・ソフトウェアとフレームワーク

FUSION_DIGITAL_POWER_DESIGNER — デジタル電源用ソフトウェア

Fusion Digital Power™ は、TI のデジタル電源コントローラとシーケンサ / ヘルス・モニタの構成および監視を行うためのグラフィカル・ユーザー・インターフェイス (GUI) ソフトウェアです。アプリケーションは PMBus プロトコルを使用し、TI の USB アダプタとシリアル・バス経由でデバイスとの通信を行います。
シミュレーション・モデル

TPS548A20 PSpice Transient Model

SLUM498.ZIP (117 KB) - PSpice Model
計算ツール

SLURB04 TPS548A20 and TPS549A20 Excel Calculator and Layout Checklist

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
降圧コンバータ (スイッチ内蔵)
TPS548A20 1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ TPS549A20 PMBus 対応、1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
VQFN-CLIP (RVE) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ