ホーム パワー・マネージメント AC/DC & DC/DC converters (integrated FET)

TPS549A20

アクティブ

PMBus 対応、1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ

製品詳細

Iout (max) (A) 15 Vin (min) (V) 4.5 Vin (max) (V) 20 Type Converter Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Enable, Forced PWM, Light Load Efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable, Voltage Margining Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125
Iout (max) (A) 15 Vin (min) (V) 4.5 Vin (max) (V) 20 Type Converter Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Enable, Forced PWM, Light Load Efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable, Voltage Margining Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN-CLIP (RVE) 28 15.75 mm² 4.5 x 3.5
  • Integrated SWIFT 9.9-mΩ and 4.3-mΩ MOSFETs Support 15-A Continuous IOUT
  • Wide Conversion Input Voltage Range: 1.5 V to 20 V (with Snubber)
  • Output Voltage Range from 0.6 V to 5.5 V
  • Available PMBus Adjustments
    • Voltage Margin and Adjustment
    • Soft-Start Time
    • Power-On Delay
    • VDD UVLO Level
    • Fault Reporting
    • Switching Frequency
  • Supports All Ceramic Output Capacitors
  • Reference Voltage: 600 mV with ±0.5% Tolerance from –40°C to 85°C ambient temperature
  • D-CAP3 Control Mode With Fast Load-Step Response
  • Hiccup Over Current Protection
  • Auto-Skipping Eco-Mode for High Light-Load Efficiency
  • FCCM for Tight Output Ripple and Voltage Tolerance Requirements
  • Pre-charged Startup Capability
  • Eight Selectable Frequency Settings from
    200 kHz to 1 MHz via PMBus
  • 4.5 mm x 3.5 mm, 28-Pin, VQFN-CLIP Package
  • Supported at the WEBENCH Design Center
  • Integrated SWIFT 9.9-mΩ and 4.3-mΩ MOSFETs Support 15-A Continuous IOUT
  • Wide Conversion Input Voltage Range: 1.5 V to 20 V (with Snubber)
  • Output Voltage Range from 0.6 V to 5.5 V
  • Available PMBus Adjustments
    • Voltage Margin and Adjustment
    • Soft-Start Time
    • Power-On Delay
    • VDD UVLO Level
    • Fault Reporting
    • Switching Frequency
  • Supports All Ceramic Output Capacitors
  • Reference Voltage: 600 mV with ±0.5% Tolerance from –40°C to 85°C ambient temperature
  • D-CAP3 Control Mode With Fast Load-Step Response
  • Hiccup Over Current Protection
  • Auto-Skipping Eco-Mode for High Light-Load Efficiency
  • FCCM for Tight Output Ripple and Voltage Tolerance Requirements
  • Pre-charged Startup Capability
  • Eight Selectable Frequency Settings from
    200 kHz to 1 MHz via PMBus
  • 4.5 mm x 3.5 mm, 28-Pin, VQFN-CLIP Package
  • Supported at the WEBENCH Design Center

The TPS549A20 is a small-sized, synchronous buck converter with anadaptive on-time D-CAP3 control mode. The device offers ease-of-use and low bill-of-material countfor space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.6-V reference, andan integrated boost switch. Competitive features include very-low external-component count, fastload-transient response, auto-skip mode operation, internal soft-start control, and no requirementfor compensation. The device also features fault report viaPMBus to simplify the power supply design

A forced continuous conduction mode helps meet tight voltage regulation accuracyrequirements for performance DSPs and FPGAs. The TPS549A20 is available in a28-pin VQFN-CLIP package and is specified from –40°C to 125°C ambient temperature.

For all available packages, see the orderable

The TPS549A20 is a small-sized, synchronous buck converter with anadaptive on-time D-CAP3 control mode. The device offers ease-of-use and low bill-of-material countfor space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.6-V reference, andan integrated boost switch. Competitive features include very-low external-component count, fastload-transient response, auto-skip mode operation, internal soft-start control, and no requirementfor compensation. The device also features fault report viaPMBus to simplify the power supply design

A forced continuous conduction mode helps meet tight voltage regulation accuracyrequirements for performance DSPs and FPGAs. The TPS549A20 is available in a28-pin VQFN-CLIP package and is specified from –40°C to 125°C ambient temperature.

For all available packages, see the orderable

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
TPS548A20 アクティブ 1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ Offers frequency synchronization and phase interleaving without PMBus.
比較対象デバイスと同等の機能で、ピン互換製品
TPS53915 アクティブ PMBus 対応、1.5V ~ 18V、12A 同期整流 SWIFT™ 降圧コンバータ Upgraded eco mode with a lower current rating.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
7 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS549A20 1.5-V to 20-V (4.5-V to 25-V Bias) Input, 15-A Synchronous Step-Down SWIFT™ Converter With PMBus™ データシート (Rev. A) PDF | HTML 2015年 12月 2日
EVM ユーザー ガイド (英語) TPS549A20 Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 8月 3日
アプリケーション・ノート DC/DC Converter Solutions for Hardware Accelerators in Data Center Applications (Rev. A) PDF | HTML 2021年 5月 4日
セレクション・ガイド Buck Converter Quick Reference Guide (Rev. B) 2021年 4月 8日
アプリケーション・ノート Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) PDF | HTML 2020年 1月 8日
技術記事 Simplifying loop compensation and poles and zeros calculations PDF | HTML 2016年 3月 18日
アプリケーション・ノート SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC 2016年 2月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS549A20EVM-737 — TPS549A20 DCAP3 高効率 15A 同期整流降圧コンバータ、評価モジュール

TPS549A20EVM-737 は、TPS549A20 降圧コンバータの動作と機能を、ユーザーが容易に評価およびテストできる設計を採用しています。この評価基板は、4.5mm x 3.5mm の QFN パッケージに封止済みで、1.5V ~ 20V の入力電圧を 1.2V のレギュレーション済み出力電圧に変換し、最大 15A の出力電流を供給します。この基板は各種ジャンパを搭載しており、各種機能のイネーブル (有効化) とモード選択の容易な評価に使用できます。また、複数のテスト・ポイントも実装しているので、重要な波形のプローブ作業に関する利便性が向上します。また、Fusion Digital (...)

ユーザー ガイド: PDF | HTML
アプリケーション・ソフトウェアとフレームワーク

FUSION_DIGITAL_POWER_DESIGNER — デジタル電源用ソフトウェア

Fusion Digital Power™ は、TI のデジタル電源コントローラとシーケンサ / ヘルス・モニタの構成および監視を行うためのグラフィカル・ユーザー・インターフェイス (GUI) ソフトウェアです。アプリケーションは PMBus プロトコルを使用し、TI の USB アダプタとシリアル・バス経由でデバイスとの通信を行います。
シミュレーション・モデル

TPS549A20 PSpice Transient Model

SLUM469.ZIP (125 KB) - PSpice Model
計算ツール

SLURB04 TPS548A20 and TPS549A20 Excel Calculator and Layout Checklist

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
AC/DC & DC/DC converters (integrated FET)
TPS548A20 1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ TPS549A20 PMBus 対応、1.5V ~ 20V、15A 同期整流 SWIFT™ 降圧コンバータ
リファレンス・デザイン

PMP11399 — エンタープライズ・イーサネット・スイッチ向け PMBus 電源システムのリファレンス・デザイン

PMP11399 は、ASIC/FPGA の 3 つのコア電圧、DDR3 コア・メモリ電圧、VTT 終端電圧、高性能イーサネット・スイッチで一般的に採用されている補助電圧向けの包括的な PMBus 電源システムです。このハードウェアは、ユーザーがリアルタイムで電源の構成と監視を行うための GUI を備えています。
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VQFN-CLIP (RVE) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ