ホーム パワー・マネージメント AC/DC & DC/DC converters (integrated FET)

TPS55332-Q1

アクティブ

AEC-Q100 認証済み、電圧スーパーバイザ搭載、1.5V ~ 60V の広い入力電圧範囲、3A 昇圧コンバータ

製品詳細

Vin (min) (V) 1.5 Vin (max) (V) 60 Topology Boost, Flyback, Forward, SEPIC Type Converter Switching frequency (min) (kHz) 80 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Nonsynchronous, Power good, UVLO adjustable Vout (min) (V) 2.5 Vout (max) (V) 50 Rating Automotive Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0042
Vin (min) (V) 1.5 Vin (max) (V) 60 Topology Boost, Flyback, Forward, SEPIC Type Converter Switching frequency (min) (kHz) 80 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Nonsynchronous, Power good, UVLO adjustable Vout (min) (V) 2.5 Vout (max) (V) 50 Rating Automotive Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0042
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • Withstands Transients up to 60 V, Boost Input
    Operating Range of 1.5 V to 40 V (VIN)
  • Peak Internal Switch Current: 5.7 A (typ)
  • 2.5 V ± 1.5% Feedback Voltage Reference
  • 80 kHz to 2.2 MHz Switching Frequency
  • High Voltage Tolerant Enable Input for On/Off State
  • Soft Start on Enable Cycle
  • Slew Rate Control on Internal Power Switch
  • External Clock Input for Synchronization
  • External Compensation for Wide Bandwidth Error
    Amplifier
  • Programmable Power on Reset Delay
  • Reset Function Filter Time for Fast Negative
    Transients
  • Programmable Undervoltage Output Monitoring,
    Issuance of Reset if Output Falls Below Set
    Threshold
  • Thermal Shutdown to Protect Device During Excessive
    Power Dissipation
  • ILIM Threshold Protection (Current Limit)
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 20-Pin HTSSOP PowerPAD Package
  • Withstands Transients up to 60 V, Boost Input
    Operating Range of 1.5 V to 40 V (VIN)
  • Peak Internal Switch Current: 5.7 A (typ)
  • 2.5 V ± 1.5% Feedback Voltage Reference
  • 80 kHz to 2.2 MHz Switching Frequency
  • High Voltage Tolerant Enable Input for On/Off State
  • Soft Start on Enable Cycle
  • Slew Rate Control on Internal Power Switch
  • External Clock Input for Synchronization
  • External Compensation for Wide Bandwidth Error
    Amplifier
  • Programmable Power on Reset Delay
  • Reset Function Filter Time for Fast Negative
    Transients
  • Programmable Undervoltage Output Monitoring,
    Issuance of Reset if Output Falls Below Set
    Threshold
  • Thermal Shutdown to Protect Device During Excessive
    Power Dissipation
  • ILIM Threshold Protection (Current Limit)
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 20-Pin HTSSOP PowerPAD Package

The TPS55332 is a monolithic high-voltage switching regulator with integrated 3-A, 60-V power MOSFET. The device can be configured as a switch mode step-up power supply with voltage supervisor. Once the internal circuits have stabilized with a minimum input supply of 3.6 V, the system can then have an input voltage range from 1.5 V to 40 V, to maintain a fixed boost output voltage. For optimum performance, VIN/Vout ratios should be set such that the minimum required duty cycle pulse > 150 ns. The supervisor circuit monitors the regulated output and indicates when this output voltage has fallen below the set value. The TPS55332 has a switching frequency range from 80 kHz to 2.2 MHz, allowing the use of low profile inductors and low value input and output capacitors. The external loop compensation gives the user the flexibility to optimize the converter response for the appropriate operating conditions. Using the enable pin (EN), the shutdown supply current is reduced to 1 µA. The device has built-in protection features such soft start on enable cycle, pulse-by-pulse current limit, and thermal sensing and shutdown due to excessive power dissipation.

The TPS55332 is a monolithic high-voltage switching regulator with integrated 3-A, 60-V power MOSFET. The device can be configured as a switch mode step-up power supply with voltage supervisor. Once the internal circuits have stabilized with a minimum input supply of 3.6 V, the system can then have an input voltage range from 1.5 V to 40 V, to maintain a fixed boost output voltage. For optimum performance, VIN/Vout ratios should be set such that the minimum required duty cycle pulse > 150 ns. The supervisor circuit monitors the regulated output and indicates when this output voltage has fallen below the set value. The TPS55332 has a switching frequency range from 80 kHz to 2.2 MHz, allowing the use of low profile inductors and low value input and output capacitors. The external loop compensation gives the user the flexibility to optimize the converter response for the appropriate operating conditions. Using the enable pin (EN), the shutdown supply current is reduced to 1 µA. The device has built-in protection features such soft start on enable cycle, pulse-by-pulse current limit, and thermal sensing and shutdown due to excessive power dissipation.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM5157-Q1 アクティブ 6A、デュアル・ランダム・スペクトラム拡散機能搭載、50V、2.2MHz、広い入力電圧範囲、昇圧 / フライバック/ SEPIC の各コンバータ 45V (50V absmax) 6A
LM51571-Q1 アクティブ デュアル・ランダム・スペクトラム拡散機能搭載、4A、50V、2.2MHz、広い入力電圧範囲 (VIN)、昇圧 / フライバック/ SEPIC の各コンバータ 45V (50V absmax) 4A
LM5158 アクティブ デュアル・ランダム・スペクトラム拡散機能搭載、3A、85V、2.2MHz、広い入力電圧範囲 (VIN) に対応する、昇圧 / フライバック/ SEPIC の各コンバータ Newer device with higher Vin, Vout capability
LM5158-Q1 アクティブ デュアル・ランダム・スペクトラム拡散機能搭載、3A、85V、2.2MHz、広い入力電圧範囲 (VIN) に対応する、昇圧 / フライバック/ SEPIC の各コンバータ LM5158-Q1 has higher Vin, Vout capability

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS55332-Q1 2.2-MHz, 60-V Output Step Up DC/DC Converter データシート (Rev. B) PDF | HTML 2014年 7月 25日
EVM ユーザー ガイド (英語) TPS55332EVM USer's Guide 2009年 7月 6日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS55332EVM — TPS55332EVM 評価モジュール

The Texas Instruments TPS55332EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS55332 Switch Mode Power Supply - Boost Regulator. The device offers configurability and can be setup to operate at a switching frequency from 80kHz to 2.2MHz.
ユーザー ガイド: PDF
シミュレーション・モデル

TPS55332-Q1 TINA-TI Reference Design

SLVMAE4.TSC (419 KB) - TINA-TI Reference Design
シミュレーション・モデル

TPS55332-Q1 TINA-TI SPICE Model

SLVMAE5.ZIP (46 KB) - TINA-TI Spice Model
シミュレーション・モデル

Unencrypted TPS55332-Q1 PSpice Transient Model Package (Rev. A)

SLVMAE3A.ZIP (36 KB) - PSpice Model
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 20 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ