ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

TPS62063

アクティブ

2x2mm SON パッケージ封止、Vout=3.3V、3MHz、1.6A 降圧コンバータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPS628512 アクティブ SOT583 パッケージ封止、2.7V ~ 6V、2A、固定周波数、降圧コンバータ Smaller SOT583 package, pin-to-pin compatible family 0.5 A, 1 A, 2 A

製品詳細

Vin (min) (V) 3.3 Vin (max) (V) 6 Vout (min) (V) 3.3 Vout (max) (V) 3.3 Iout (max) (A) 1.6 Iq (typ) (mA) 0.018 Switching frequency (min) (kHz) 2600 Switching frequency (max) (kHz) 3400 EMI features Spread Spectrum Features Enable, Forced PWM, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, ULVO Fixed Operating temperature range (°C) -40 to 85 Rating Catalog Regulated outputs (#) 1 Control mode Voltage mode Duty cycle (max) (%) 100 Type Converter
Vin (min) (V) 3.3 Vin (max) (V) 6 Vout (min) (V) 3.3 Vout (max) (V) 3.3 Iout (max) (A) 1.6 Iq (typ) (mA) 0.018 Switching frequency (min) (kHz) 2600 Switching frequency (max) (kHz) 3400 EMI features Spread Spectrum Features Enable, Forced PWM, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, ULVO Fixed Operating temperature range (°C) -40 to 85 Rating Catalog Regulated outputs (#) 1 Control mode Voltage mode Duty cycle (max) (%) 100 Type Converter
WSON (DSG) 8 4 mm² 2 x 2
  • 3-MHz Switching Frequency
  • VIN Range from 2.7 V to 6 V
  • 1.6-A Output Current
  • Up to 97% Efficiency
  • Power Save Mode and 3-MHz Fixed PWM Mode
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Output Discharge Function
  • Typical 18-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Voltage Positioning
  • Clock Dithering
  • Supports Maximum 1-mm Height Solutions
  • Available in a 2 mm × 2 mm × 0.75 mm WSON
  • APPLICATIONS
    • Point of Load (POL)
    • Notebooks, Pocket PCs
    • Portable Media Players
    • DSP Supplies

All other trademarks are the property of their respective owners

  • 3-MHz Switching Frequency
  • VIN Range from 2.7 V to 6 V
  • 1.6-A Output Current
  • Up to 97% Efficiency
  • Power Save Mode and 3-MHz Fixed PWM Mode
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Output Discharge Function
  • Typical 18-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Voltage Positioning
  • Clock Dithering
  • Supports Maximum 1-mm Height Solutions
  • Available in a 2 mm × 2 mm × 0.75 mm WSON
  • APPLICATIONS
    • Point of Load (POL)
    • Notebooks, Pocket PCs
    • Portable Media Players
    • DSP Supplies

All other trademarks are the property of their respective owners

The TPS6206x is a family of highly efficient synchronous step-down DC-DC converters. They provide up to 1.6-A output current.

With an input voltage range of 2.7 V to 6 V, the device is a perfect fit for power conversion from a single Li-Ion battery as well from 5-V or 3.3-V system supply rails. The TPS6206x operates at 3-MHz fixed frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range. The power save mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high.

In the shutdown mode, the current consumption is reduced to less than 1 µA and an internal circuit discharges the output capacitor.

TPS6206x family is optimized for operation with a tiny 1-µH inductor and a small 10-µF output capacitor to achieve smallest solution size and high regulation performance.

The TPS6206x operates over a free air temperature of –40°C to 85°C. The device is available in a small 2-mm × 2-mm × 0.75-mm 8-pin WSON PowerPAD integrated circuit package.

The TPS6206x is a family of highly efficient synchronous step-down DC-DC converters. They provide up to 1.6-A output current.

With an input voltage range of 2.7 V to 6 V, the device is a perfect fit for power conversion from a single Li-Ion battery as well from 5-V or 3.3-V system supply rails. The TPS6206x operates at 3-MHz fixed frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range. The power save mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high.

In the shutdown mode, the current consumption is reduced to less than 1 µA and an internal circuit discharges the output capacitor.

TPS6206x family is optimized for operation with a tiny 1-µH inductor and a small 10-µF output capacitor to achieve smallest solution size and high regulation performance.

The TPS6206x operates over a free air temperature of –40°C to 85°C. The device is available in a small 2-mm × 2-mm × 0.75-mm 8-pin WSON PowerPAD integrated circuit package.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS6206x 3-MHz, 1.6-A, Step Down Converter in 2-mm × 2-mm WSON Package データシート (Rev. B) PDF | HTML 2015年 7月 31日
アプリケーション・ノート QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023年 12月 6日
アプリケーション・ノート Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018年 12月 11日
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018年 6月 22日
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017年 10月 24日
アプリケーション・ノート Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017年 6月 15日
設計ガイド Wi-Fi対応、レベル1&2電気自動車サービス機器リファレンス・デザイン 英語版 2017年 5月 26日
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016年 10月 24日
アプリケーション・ノート Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015年 8月 17日
Analog Design Journal Five steps to a great PCB layout for a step-down converter 2015年 1月 29日
アプリケーション・ノート Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012年 1月 13日
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011年 6月 17日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS62060EVM-663 — TPS62060EVM-663 評価モジュール

The TPS62060EVM-663 is a fully assembled and tested platform for evaluating the performance of the TPS62060 1.6-A step-down converter. This document includes schematic diagrams, printed-circuit board (PCB) layout, bill of materials, and test data. Throughout this document, the abbreviations EVM, (...)

ユーザー ガイド: PDF
シミュレーション・モデル

TPS62063 TINA-TI Reference Design Start

SLVM397.TSC (849 KB) - TINA-TI Reference Design
シミュレーション・モデル

TPS62063 TINA-TI Reference Design Steady

SLVM395.TSC (290 KB) - TINA-TI Reference Design
シミュレーション・モデル

TPS62063 TINA-TI Transient Spice Model

SLVM396.ZIP (80 KB) - TINA-TI Spice Model
シミュレーション・モデル

TPS62063 Unencrypted PSpice Transient Model Package (Rev. B)

SLVM192B.ZIP (166 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDM-DELFINO-ETHERCAT — 高性能マイコン向け EtherCAT インターフェイスのリファレンス・デザイン

このリファレンス・デザインは、C2000 Delfino マイコンを EtherCAT™ ET1100 スレーブ・コントローラに接続する方法を示します。このインターフェイスは、帯域幅の最大化と待ち時間の最小化を目的として、デマルチプレクス形式のアドレス・バス / データ・バスの両方をサポートしているほか、SPI モードにサポートし、ピン数の少ない EtherCAT 通信に対応しています。  スレーブ・コントローラは 100Mbps イーサネット・ベースの Fieldbus 通信をオフロードするので、これらのタスクに関連する CPU のオーバーヘッドを排除できます。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDC-EVSE-NFC — EV 充電ステーション(パイル)向け NFC 認証のリファレンス・デザイン

The TIDC-EVSE-NFC reference design showcases a straightforward integration of TI’s NFC technology with an existing EVSE platform to enable user authentication. The NFC standard comprises many different sub-technologies and working groups, making integration into a specific system (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDC-EVSE-WIFI — Wi-Fi 対応 Level 1 / Level 2 電気自動車サービス機器のリファレンス・デザイン

TIDC-EVSE-Wi-Fi® は検証済みのリファレンス・デザインで、Wi-Fi 機能を追加して、J1772 に準拠するレベル 1 および 2 の電気自動車サービス機器(EVSE)を実装する方法の詳細を示します。CC3100 ネットワーク・プロセッサを使用すると、EVSE などの組み込み度の高い機器を、既存の無線ネットワークに、またはデバイスに直接、簡単に接続できます。このリファレンス・デザインは、EVSE にこうした機能を集積しており、接続した電気自動車の充電状態を遠隔から監視および制御可能です。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-010011 — 保護リレー・プロセッサ・モジュール向け高効率電源アーキテクチャのリファレンス・デザイン

This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
回路図: PDF
パッケージ ピン数 ダウンロード
WSON (DSG) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ