TPS62480 6A, 2.4V-5.5V input, Synchronous step-down converter with PG Output, Adjust. Soft-start and Optional | TIJ.co.jp

TPS62480 (供給中) 6A, 2.4V-5.5V input, Synchronous step-down converter with PG Output, Adjust. Soft-start and Optional

6A, 2.4V-5.5V input, Synchronous step-down converter with PG Output, Adjust. Soft-start and Optional - TPS62480
データシート
 

推奨代替製品

  • TPSM82480  -  インダクタ内蔵の代替モジュール
  • TPS62180  -  入力電圧が高いデバイスをお探しの場合、TPS62180 をお試しください。

概要

The TPS62480 is a synchronous 2-phase step-down DC-DC converter for low profile point-of-load power supplies. The input voltage range of 2.4 to 5.5 V enables operation from typical 3.3-V or 5-V interface supplies as well as from backup circuits dropping down as low as 2.4 V. The output current is up to 6 A continuously provided by two phases of 3 A each, allowing the use of low-profile external components. Both the rails are running out of phase, reducing pulse current noise significantly.

The TPS62480 provides an automatically entered power save mode to maintain high efficiency down to very light loads. This incorporates an automatic phase adding and shedding feature using both or only one phase according to the actual load.

The device features a Power Good signal and an adjustable soft start. Also, the device features a Thermal Good signal to detect excessive internal temperature. The output voltage can be changed to a preselected value by VSEL pin. TPS62480 is able to operate in 100% duty cycle mode.

The TPS62480 is packaged in a small 3 × 2.5 mm HotRod package (RNC).

特長

  • Dual Phase Current Mode Topology
  • Input Voltage Range 2.4 to 5.5 V
  • Output Voltage Range 0.6 to 5.5 V
  • Output Current of 6 A
  • Typical Quiescent Current of 23 µA
  • Feedback Voltage Accuracy of ±1% (PWM Mode)
  • Output Voltage Select
  • Phase Shifted Operation
  • Automatic Power Save Modes
  • Forced PWM Mode
  • Adjustable Soft Start
  • Power Good / Thermal Good Outputs
  • Undervoltage Lockout
  • Overcurrent and Short-Circuit Protection
  • Overtemperature Protection
  • 3 × 2.5 mm HotRod™ Package

New!
WEBENCH® Power Designer is now even easier to use. Try it now.

WEBENCH® Designer TPS62480

  最小   最大 範囲
入力電圧  V 2.4 to 5.5V
出力電圧  V 0.6 to 5.5V
負荷電流  A ≤ 6A
周囲温度  °C -40 to 125°C

機能一覧

他の製品と比較 降圧コンバータ(スイッチ内蔵) メール Excelへダウンロード
Part number オーダー・オプション Vin (Min) (V) Vin (Max) (V) Vout (Min) (V) Vout (Max) (V) Iout (Max) (A) Regulated outputs (#) Switching frequency (Min) (kHz) Switching frequency (Max) (kHz) Iq (Typ) (mA) Features Control mode Duty cycle (Max) (%) Operating temperature range (C) Package Group Type Package size: mm2:W x L (PKG)
TPS62480 ご注文 2.4     5.5     0.6     5.5     6     1     2000     2500     0.023     Enable
Forced PWM
Light Load Efficiency
Output Discharge
Over Current Protection
Phase Interleaving
Power Good
Pre-Bias Start-Up
Synchronous Rectification
Tracking
UVLO Fixed
Voltage Margining
Adaptive/Dynamic Voltage Scaling    
Current Mode     100     -40 to 125     VQFN-HR | 16     Converter     16VQFN-HR: 8 mm2: 3 x 2.5 (VQFN-HR | 16)