TPS65131-Q1
- Qualified for Automotive Applications
- AEC-Q100 Test Guidance With the Following Results:
- Device Temperature Grade 2: –40°C to 105°C Ambient Operating Temperature Range
- Electrical Characteristics Tested Over –40°C to 125°C Junction Temperature Range
- Device HBM ESD Classification Level H1C
- Device CDM ESD Classification Level C4B
- Dual Adjustable Output Voltages up to 15 V and down to –15 V
- 2–A Typical Switch-Current Limit for Boost and Inverter Main Switches
- High Conversion Efficiency
- Up to 91% at Positive Output Rail
- Up to 85% at Negative Output Rail
- Power-Save Mode at Low Load
- Independent Enable Inputs for Power-Up and Power-Down Sequencing
- Control Output for External PFET to Support Complete Supply Disconnect When Shut Down
- 2.7-V to 5.5-V Input-Voltage Range
- Minimum 1.25-MHz Fixed-Frequency PWM Operation
- Thermal Shutdown
- Overvoltage Protection on Both Outputs
- 0.2-µA Typical Shutdown Current
- Small 4-mm × 4-mm QFN-24 Package (RGE)
The TPS65131-Q1 device is dual-output dc-dc converter generating a positive output voltage up to 15 V and a negative output voltage down to –15 V with output currents of typically 200 mA, depending on input-voltage to output-voltage ratio. With a total efficiency up to 85%, the device is ideal for portable battery-powered equipment. The input-voltage range of 2.7 V to 5.5 V allows, for example, 3.3-V and 5-V rails to power the TPS65131-Q1 device. The TPS65131-Q1 device comes in a QFN-24 package with thermal pad. Requiring few and small external components, the overall solution size can be small.
The converter operates with a fixed-frequency PWM control topology and, with power-save mode enabled, uses a pulse-skipping mode at light load currents. In operation, the typical overall device quiescent current is only 500 µA. In shutdown, the device draws typically 0.2 µA. Independent enable pins allow power-up and power-down sequencing for both outputs. The device has an internal current limit, overvoltage protection, and a thermal shutdown for highest reliability under fault conditions.
The TPS65131-Q1 device is qualified for automotive applications, according to AEC-Q100 temperature grade 2. The electrical characteristics are tested over –40°C to 125°C device junction temperature. This, combined with lowest shutdown currents, small solution size, package with thermal pad, plus good efficiency and protection features, targets automotive and industrial applications.
お客様が関心を持ちそうな類似品
比較対象デバイスと類似の機能
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TPS65131-Q1 Positive- and Negative-Output DC-DC Converter データシート (Rev. E) | PDF | HTML | 2017年 2月 8日 | ||
アプリケーション・ノート | 昇圧コンバータの電力段に関する基本的な計算 (Rev. D 翻訳版) | PDF | HTML | 英語版 (Rev.D) | PDF | HTML | 2022年 12月 1日 | |
アプリケーション・ノート | Basic Calculation of a Boost Converter's Power Stage... (Rev. D) | PDF | HTML | 2022年 11月 21日 | |||
アプリケーション・ノート | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018年 9月 19日 | ||||
ホワイト・ペーパー | Powering automotive displays to create interactive driving experiences | 2017年 12月 21日 | ||||
アプリケーション・ノート | Basic calculation of an inverting buck-boost power stage (Rev. A) | 2017年 8月 28日 | ||||
技術記事 | Split-rail converters reduce BOM size and cost in new automotive displays | PDF | HTML | 2015年 7月 1日 | |||
EVM ユーザー ガイド (英語) | TPS65131EVM User's Guide (Rev. C) | 2010年 11月 23日 | ||||
アプリケーション・ノート | Minimizing Ringing at the Switch Node of a Boost Converter | 2006年 9月 15日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
PMP9780 — リファレンス・デザイン:バイポーラ TFT LCD 電源、TPS65131-Q1 およびチャージ・ポンプ使用
パッケージ | ピン数 | ダウンロード |
---|---|---|
VQFN (RGE) | 24 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。