ホーム パワー・マネージメント リニア・レギュレータと低ドロップアウト (LDO) レギュレータ

TPS7B4253-Q1

アクティブ

車載向け、300mA、バッテリ直結対応 (40V)、調整可能な電圧トラッキング機能、低ドロップアウト電圧レギュレータ

製品詳細

Output options Tracking Output Iout (max) (A) 0.3 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 40 Vout (min) (V) 1.5 Iq (typ) (mA) 0.04 Thermal resistance θJA (°C/W) 45 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Reverse Current Protection, Reverse voltage protection, Short-to-battery protection PSRR at 100 KHz (dB) 60 Dropout voltage (Vdo) (typ) (mV) 350 Operating temperature range (°C) -40 to 125
Output options Tracking Output Iout (max) (A) 0.3 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 40 Vout (min) (V) 1.5 Iq (typ) (mA) 0.04 Thermal resistance θJA (°C/W) 45 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Reverse Current Protection, Reverse voltage protection, Short-to-battery protection PSRR at 100 KHz (dB) 60 Dropout voltage (Vdo) (typ) (mV) 350 Operating temperature range (°C) -40 to 125
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 3A
    • Device CDM ESD Classification Level C6
  • –40 to 45-V Wide Input-Voltage Range (Maximum)
  • Output Voltage Adjusts Down to:
    • 1.5 to 40 V (HTSSOP)
    • 2 to 40 V (SO PowerPAD™)
  • 300-mA Output Current Capability
  • Very-Low Output Tracking Tolerance, ±4 mV
  • 320-mV Low Dropout Voltage when IOUT = 200 mA
  • Separate Pins for Enable and Tracking Inputs (HTSSOP only)
  • Low Quiescent Current (IQ):
    • < 4 µA when EN = LOW
    • 60 µA (Typical) at Light Loads
  • Extremely Wide ESR Range.
    • Stable With 10- to 500-µF Ceramic Output Capacitor, ESR 1 mΩ to 20 Ω
  • Reverse Polarity Protection
  • Current-Limit and Thermal-Shutdown Protection
  • Output Short-Circuit Proof to Ground and Supply
  • Inductive Clamp at OUT Pin
  • Available in the Following Packages:
    • 8-Pin SO PowerPAD Package
    • 20-Pin HTSSOP Package
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 3A
    • Device CDM ESD Classification Level C6
  • –40 to 45-V Wide Input-Voltage Range (Maximum)
  • Output Voltage Adjusts Down to:
    • 1.5 to 40 V (HTSSOP)
    • 2 to 40 V (SO PowerPAD™)
  • 300-mA Output Current Capability
  • Very-Low Output Tracking Tolerance, ±4 mV
  • 320-mV Low Dropout Voltage when IOUT = 200 mA
  • Separate Pins for Enable and Tracking Inputs (HTSSOP only)
  • Low Quiescent Current (IQ):
    • < 4 µA when EN = LOW
    • 60 µA (Typical) at Light Loads
  • Extremely Wide ESR Range.
    • Stable With 10- to 500-µF Ceramic Output Capacitor, ESR 1 mΩ to 20 Ω
  • Reverse Polarity Protection
  • Current-Limit and Thermal-Shutdown Protection
  • Output Short-Circuit Proof to Ground and Supply
  • Inductive Clamp at OUT Pin
  • Available in the Following Packages:
    • 8-Pin SO PowerPAD Package
    • 20-Pin HTSSOP Package

For automotive off-board sensors and small current off-board modules, the power supply is through a long cable from the main board. In such cases, protection is required in the power devices for the off-board loads to prevent the onboard components from damage during a short to GND or short to battery caused by a broken cable. Off-board sensors require consistent power supply as onboard components to secure high accuracy of data acquisition.

The TPS7B4253-Q1 device is designed for automotive applications with a 45-V load dump. The device can either be used as one tracking low-dropout (LDO) regulator or voltage tracker to build one closed power loop for off-board sensors with an onboard main supply. The output of the device is accurately regulated by a reference voltage at the ADJ pin.

To provide an accurate power supply to the off-board modules, the device offers a 4-mV ultralow tracking tolerance between the ADJ and FB pins across temperature. The back-to-back PMOS topology eliminates the need for an external diode under reverse polarity condition. The TPS7B4253-Q1 device also includes thermal shutdown, inductive clamp, overload, and short-to-battery protection to prevent damage to onboard components during extreme conditions.

For automotive off-board sensors and small current off-board modules, the power supply is through a long cable from the main board. In such cases, protection is required in the power devices for the off-board loads to prevent the onboard components from damage during a short to GND or short to battery caused by a broken cable. Off-board sensors require consistent power supply as onboard components to secure high accuracy of data acquisition.

The TPS7B4253-Q1 device is designed for automotive applications with a 45-V load dump. The device can either be used as one tracking low-dropout (LDO) regulator or voltage tracker to build one closed power loop for off-board sensors with an onboard main supply. The output of the device is accurately regulated by a reference voltage at the ADJ pin.

To provide an accurate power supply to the off-board modules, the device offers a 4-mV ultralow tracking tolerance between the ADJ and FB pins across temperature. The back-to-back PMOS topology eliminates the need for an external diode under reverse polarity condition. The TPS7B4253-Q1 device also includes thermal shutdown, inductive clamp, overload, and short-to-battery protection to prevent damage to onboard components during extreme conditions.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPS7B4254-Q1 アクティブ 車載向け、150mA、バッテリ直結対応 (40V)、調整可能な電圧トラッキング機能、低ドロップアウト電圧レギュレータ Lower current

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
9 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS7B4253-Q1 300-mA 40-V Low-Dropout Voltage-Tracking LDO With 4-mV Tracking Tolerance データシート (Rev. C) PDF | HTML 2016年 7月 22日
機能安全情報 TPS7B4253-Q1 Functional Safety FIT Rate and Failure Mode Distribution 2019年 12月 17日
アプリケーション概要 Automotive Off-Board Sensor Power Considerations 2018年 9月 20日
その他の技術資料 車載用バッテリ直接接続アプリケーションでのLDOを使用した設計の基本 英語版をダウンロード 2017年 9月 11日
アプリケーション・ノート Using Tracking LDOs as High-Side Switch (for Low-Current Applications) 2016年 10月 28日
EVM ユーザー ガイド (英語) LDO Parallel Design Evaluation Module User's Guide 2016年 9月 14日
アプリケーション・ノート Various Applications for Voltage-Tracking LDO 2016年 8月 3日
アプリケーション・ノート TPS7B4253-Q1 Pin FMEA 2015年 12月 21日
ユーザー・ガイド TPS7B4253-Q1 Evaluation Module 2014年 12月 11日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LDO-PARAL-DESG-EVM — TPS7B4253-Q1 使用 LDO パラレル・ソリューションの評価ボード

This LDO Parallel Solution evaluation modules (EVM) help designers evaluate the operation and performance of TPS7B4253-Q1 and TPS7B6750-Q1 parallel application. This EVM uses a very low-tolerance, voltagetracking LDO TPS7B4253-Q1 to demonstrate the
implementation of LDO parallel solution for high (...)
ユーザー ガイド: PDF
評価ボード

TPS7B4253EVM — TPS7B4253QPWPRQ1 トラッキング LDO 評価モジュール

 

TPS7B4253 evaluation modules (EVM) help designers evaluate the operation and performance of TPS7B4253QPWPRQ1 tracking LDO. The TPS7B4253 is a monolithic integrated low dropout voltage tracker in HSOIC-DDA package. It is designed to supply off-board sensors in automotive environment. The IC has (...)
ユーザー ガイド: PDF
シミュレーション・モデル

TPS7B4253 PSpice Transient Model (Rev. C)

SLVMB36C.ZIP (89 KB) - PSpice Model
シミュレーション・モデル

TPS7B4253 TINA-TI Reference Design

SLVMC49.TSC (163 KB) - TINA-TI Reference Design
シミュレーション・モデル

TPS7B4253 TINA-TI Transient Spice Model

SLVMC48.ZIP (20 KB) - TINA-TI Spice Model
シミュレーション・モデル

TPS7B4253 Unencrypted PSpice Transient Model

SLVMC85.ZIP (3 KB) - PSpice Model
リファレンス・デザイン

TIDA-00745 — 車載ボディ・コントロール・モジュール向け 15W システム・レベル電源のリファレンス・デザイン

TIDA-00745 は、車載ボディ・コントロール・モジュール向けにシステム最適化された CISPR25 Class 4 14W スイッチ・モード電源のリファレンス・デザインです。このデザインで採用している降圧コントローラはいずれも 2.1MHz のスイッチング周波数で動作します。 

このデザインは、以下の 4 つの主要ブロックに分割されています。

  1. EMI フィルタ:伝導 EMI の抑制に適したコモンモード・フィルタと差動モード・フィルタ
  2. 事前昇圧(TPS40210-Q1):15W アプリケーションに最適な、効率的で低コストの非同期事前昇圧の設計。出力電圧は 7.5V に維持され、Vin > (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00863 — TPS7B4253-Q1 使用 LDO パラレル・ソリューションのリファレンス・デザイン

このリファレンス・デザインは、許容誤差が非常に小さい電圧トラッキング LDO である TPS7B4253-Q1 を活用して、大出力電流を供給すると同時に低静止電流 (IQ) の要件に適合する LDO の並列配置を提示します。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HSOIC (DDA) 8 オプションの表示
HTSSOP (PWP) 20 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ