TS5A22366

アクティブ

負電圧信号使用可能、1.8V 入力ロジック対応、0.7Ω、5V、2:1 (SPDT)、2 チャネル・アナログ・スイッチ

製品詳細

Protocols Analog Audio Configuration 2:1 SPDT Number of channels 2 Bandwidth (MHz) 32 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.75 Ron (typ) (mΩ) 700 Input/output voltage (min) (V) -3.25 Input/output voltage (max) (V) 5.5 Supply current (typ) (µA) 6 ESD HBM (typ) (kV) 2.5 Operating temperature range (°C) -40 to 85 Crosstalk (dB) -70 ESD CDM (kV) 1 Input/output continuous current (max) (mA) 150 COFF (typ) (pF) 48 CON (typ) (pF) 176 Off isolation (typ) (dB) -70 OFF-state leakage current (max) (µA) 0.375 Ron (max) (mΩ) 2000 Ron channel match (max) (Ω) 1 RON flatness (typ) (Ω) 0.0135 Turnoff time (disable) (max) (ns) 206 Turnon time (enable) (max) (ns) 470 VIH (min) (V) 1.05 VIL (max) (V) 0.65
Protocols Analog Audio Configuration 2:1 SPDT Number of channels 2 Bandwidth (MHz) 32 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.75 Ron (typ) (mΩ) 700 Input/output voltage (min) (V) -3.25 Input/output voltage (max) (V) 5.5 Supply current (typ) (µA) 6 ESD HBM (typ) (kV) 2.5 Operating temperature range (°C) -40 to 85 Crosstalk (dB) -70 ESD CDM (kV) 1 Input/output continuous current (max) (mA) 150 COFF (typ) (pF) 48 CON (typ) (pF) 176 Off isolation (typ) (dB) -70 OFF-state leakage current (max) (µA) 0.375 Ron (max) (mΩ) 2000 Ron channel match (max) (Ω) 1 RON flatness (typ) (Ω) 0.0135 Turnoff time (disable) (max) (ns) 206 Turnon time (enable) (max) (ns) 470 VIH (min) (V) 1.05 VIL (max) (V) 0.65
DSBGA (YFC) 12 1.8369 mm² 1.57 x 1.17
  • Negative Signaling Capability: Maximum Swing From –2.75 V to 2.75 V (V+ = 2.75 V)
  • Low ON-State Resistance (0.7 Ω Typ)
  • Excellent ON-State Resistance Matching
  • 1.8-V Compatible Control Input Threshold Independent of V+
  • Control Inputs Are 5.5-V Tolerant
  • 2.25-V to 5.5-V Power Supply (V+)
  • Low Charge Injection
  • Specified Break-Before-Make Switching
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2500-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
    • 200-V Machine Model (A115-A)
  • Negative Signaling Capability: Maximum Swing From –2.75 V to 2.75 V (V+ = 2.75 V)
  • Low ON-State Resistance (0.7 Ω Typ)
  • Excellent ON-State Resistance Matching
  • 1.8-V Compatible Control Input Threshold Independent of V+
  • Control Inputs Are 5.5-V Tolerant
  • 2.25-V to 5.5-V Power Supply (V+)
  • Low Charge Injection
  • Specified Break-Before-Make Switching
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2500-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
    • 200-V Machine Model (A115-A)

The TS5A22366 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V to 5.5 V. The device features negative signal capability that allows signals below ground to pass through the switch without distortion.

The break-before-make feature prevents signal distortion during the transferring of a signal from one path to another. Low ON-state resistance, excellent channel-to-channel ON-state resistance matching, and minimal total harmonic distortion (THD) performance are ideal for audio applications.

The TS5A22366 is available is a ultra small 1.6 mm × 1.2 mm wafer-chip-scale package (WCSP) (0.4 mm pitch).

The TS5A22366 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V to 5.5 V. The device features negative signal capability that allows signals below ground to pass through the switch without distortion.

The break-before-make feature prevents signal distortion during the transferring of a signal from one path to another. Low ON-state resistance, excellent channel-to-channel ON-state resistance matching, and minimal total harmonic distortion (THD) performance are ideal for audio applications.

The TS5A22366 is available is a ultra small 1.6 mm × 1.2 mm wafer-chip-scale package (WCSP) (0.4 mm pitch).

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
NEW TMUX4827 アクティブ 1.8V ロジック対応、±12V 超過電源に対応、2:1 (SPDT)、2 チャネル スイッチ Improved +/- 12V beyond the supply feature, 0.13-ohm Ron, and 1.8V logic support
TS5A22362 アクティブ 負の信号伝達機能搭載、0.65V、2:1 (SPDT)、2 チャネル・アナログ・スイッチ Similar 2:1 2 channel audio switch with negative rail capability and better specifications

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート 0.8-Ohm Dual SPDT Analog Switch With Negative Rail Capability and 1.8-V Compatib データシート (Rev. B) 2013年 6月 3日
アプリケーション概要 1.8-V Logic for Multiplexers and Signal Switches (Rev. C) PDF | HTML 2022年 7月 26日
アプリケーション・ノート Selecting the Correct Texas Instruments Signal Switch (Rev. E) PDF | HTML 2022年 6月 2日
アプリケーション・ノート Multiplexers and Signal Switches Glossary (Rev. B) PDF | HTML 2021年 12月 1日
アプリケーション・ノート Preventing Excess Power Consumption on Analog Switches 2008年 7月 3日
アプリケーション・ノート Semiconductor Packing Material Electrostatic Discharge (ESD) Protection 2004年 7月 8日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

HSPICE Model for TS5A22366

SCDM125.ZIP (106 KB) - HSpice Model
シミュレーション・モデル

TS5A22366 IBIS Model

SCDM124.ZIP (67 KB) - IBIS Model
パッケージ ピン数 ダウンロード
DSBGA (YFC) 12 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ