ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ LLC コントローラ

スタンバイ消費電力を低減する高電圧スタートアップ機能搭載、LLC 共振コントローラ

UCC256302 は新規設計での使用を推奨しません
従来の設計をサポートできるようにこの製品は引き続き生産中ですが、TI はこの製品を新規の設計には推奨しません。以下の代替品のいずれかをご検討ください。
open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
UCC256402 アクティブ 超低消費電力のスタンバイ動作、高電圧スタートアップ対応、LLC 共振コントローラ Lowers audible noise in applications
比較対象デバイスと同等の機能で、ピン配置が異なる製品
NEW UCC25660 アクティブ 広い VIN/VOUT (入力電圧と出力電圧)、750kHz、LLC コントローラ Capable of higher operating frequency and supports wider VIN/VOUT operation

製品詳細

Control mode Current Features High voltage gate driver integrated, High voltage startup, Hybrid hysteretic control, Light load efficiency, Over Temperature Protection Vin (min) (V) 13 Vin (max) (V) 30 Operating temperature range (°C) -40 to 125 Topology Half bridge, LLC Rating Catalog
Control mode Current Features High voltage gate driver integrated, High voltage startup, Hybrid hysteretic control, Light load efficiency, Over Temperature Protection Vin (min) (V) 13 Vin (max) (V) 30 Operating temperature range (°C) -40 to 125 Topology Half bridge, LLC Rating Catalog
SOIC (DDB) 14 59.4 mm² 9.9 x 6
  • Integrated High Voltage Startup
    • Eliminates Need for External
      Bias Supply
  • Best-in-Class Transient Response
  • Hybrid Hysteretic Control (HHC)
    • Best-in-Class Transient Response
    • Easy Compensation Design
  • Optimized Low Power Features Enable 75 mW
    Standby Power Design with PFC on
    • Advanced Burst Mode
      Opto-Coupler Low Power Operation
    • Helps Enable Compliance to CoC Tier II Standard
  • Fast Exit from Burst Mode
  • Improved Capacitive Region Avoidance Scheme
  • Adaptive Dead-Time
  • Internal High-Side Gate Drivers
    (0.6-A and 1.2-A Capability)
  • Robust Soft Start with No Hard Switching
  • Over Temperature, Output Over Voltage, Input
    Over and Under Voltage Protection with
    Three Levels of Over Current Protections
  • Wide Operating Frequency Range
    (35 kHz to 1 MHz)
  • Select the appropriate LLC resonant controller for your design with UCC25630x Selection GuideUCC25630x Selection Guide
  • Create a Custom Design Using the UCC256302 With the WEBENCH® Power Designer
  • Integrated High Voltage Startup
    • Eliminates Need for External
      Bias Supply
  • Best-in-Class Transient Response
  • Hybrid Hysteretic Control (HHC)
    • Best-in-Class Transient Response
    • Easy Compensation Design
  • Optimized Low Power Features Enable 75 mW
    Standby Power Design with PFC on
    • Advanced Burst Mode
      Opto-Coupler Low Power Operation
    • Helps Enable Compliance to CoC Tier II Standard
  • Fast Exit from Burst Mode
  • Improved Capacitive Region Avoidance Scheme
  • Adaptive Dead-Time
  • Internal High-Side Gate Drivers
    (0.6-A and 1.2-A Capability)
  • Robust Soft Start with No Hard Switching
  • Over Temperature, Output Over Voltage, Input
    Over and Under Voltage Protection with
    Three Levels of Over Current Protections
  • Wide Operating Frequency Range
    (35 kHz to 1 MHz)
  • Select the appropriate LLC resonant controller for your design with UCC25630x Selection GuideUCC25630x Selection Guide
  • Create a Custom Design Using the UCC256302 With the WEBENCH® Power Designer

The UCC256302 is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed for use in offline AC-DC or isolated DC-DC to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC256302 includes an integrated, high voltage startup function which eliminates the need for an external bias supply, reducing BOM count and minimizing solution size. UCC256302 uses hybrid hysteretic control to provide best in class line and load transient response. The control makes the open loop transfer function a first order system so that it’s very easy to compensate.

UCC256302 provides a high efficient burst mode with consistent burst power level during each burst on cycle. The burst power level is programmable and adaptively changes with input voltage, making the optimization of efficiency very easy.

Select the appropriate LLC resonant controller for your design with UCC25630x Selection Guide

The UCC256302 is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed for use in offline AC-DC or isolated DC-DC to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC256302 includes an integrated, high voltage startup function which eliminates the need for an external bias supply, reducing BOM count and minimizing solution size. UCC256302 uses hybrid hysteretic control to provide best in class line and load transient response. The control makes the open loop transfer function a first order system so that it’s very easy to compensate.

UCC256302 provides a high efficient burst mode with consistent burst power level during each burst on cycle. The burst power level is programmable and adaptively changes with input voltage, making the optimization of efficiency very easy.

Select the appropriate LLC resonant controller for your design with UCC25630x Selection Guide

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
7 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC256302 ハイブリッド・ヒステリシス・モード、VIN(電圧入力範囲)の広い LLC 共振コントローラ データシート 2017年 11月 2日
アプリケーション・ノート Improving Transient Response in LLC Converters Using Hybrid Hysteretic Control (Rev. B) 2021年 4月 7日
アプリケーション・ノート Migrating to UCC25640x from UCC25630x (Rev. A) 2019年 12月 10日
アプリケーション概要 Exceeding Modern Energy Standards with 'Always On' PFC and LLC Controllers​ (Rev. B) 2019年 8月 1日
アプリケーション・ノート Improving ZVS and efficiency in LLC converters 2018年 11月 5日
アプリケーション・ノート UCC25630x Practical Design Guidelines (Rev. A) 2017年 12月 8日
セレクション・ガイド UCC25630x Selection Guide 2017年 8月 29日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCC25630-1EVM-291 — UCC256301 LLC 評価モジュール

UCC25630-1EVM-291 is an EVM of LLC resonant half-bridge DC-DC power converter with LLC controller UCC256301. UCC25630-1EVM-291 accepts DC line input from 340Vdc to 410Vdc, AC input voltage from 85 VAC to 264 VAC, and outputs nominal 12Vdc with full load output power 120W, or full output current 10A.

ユーザー ガイド: PDF
シミュレーション・モデル

UCC256301 SIMPLIS Model

SLUM596.ZIP (108 KB) - SIMPLIS Model
計算ツール

SLUC634 UCC25630x Design Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
LLC コントローラ
UCC256301 入力電圧範囲(Vin)の広い LLC 共振コントローラ、高電圧スタートアップ機能搭載、超低スタンバイ消費電力 UCC256302 スタンバイ消費電力を低減する高電圧スタートアップ機能搭載、LLC 共振コントローラ UCC256303 スタンバイ消費電力を低減する LLC 共振コントローラ UCC256304 スタンバイ消費電力を低減する高電圧スタートアップ機能搭載、広い入力電圧範囲(Vin)の LLC 共振コントローラ
リファレンス・デザイン

PMP40379 — オーディオ・アンプ向け 500W シングル・ステージ LLC 電源のリファレンス・デザイン

This single-stage LLC converter reference design illustrates how to convert AC input voltage (100-120 Vac and 200-240 Vac) to isolated ±42-V DC output with the UCC256302 resonant controller. The design has a regulated ±42-V output that can handle up to 6 A of continuous output current (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP21683 — 48V/550W 共振コンバータのリファレンス・デザイン

This resonant converter reference design takes a 380-V to 420-V DC input and generates a 48-V up to 550-W output. With the UCC256302 driver-integrated resonant converter controller and UCC24624, a two-channel synchronous rectifier (SR) driver, this design can achieve 97.95% peak efficiency.
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP30522 — 110VAC 入力、38V 出力、2A シングル・ステージ LLC 共振コンバータのリファレンス・デザイン

このリファレンス・デザインは、ハーフ・ブリッジ LLC 共振コンバータであり、通常は PFC フロント・エンドと組み合わせて使用します。ライン電源 (100VAC ~ 127 VAC) からの直接駆動で動作し、38V で 2A を供給します。バースト・モード動作により、負荷が 1% ~ 100% の範囲内で変動しても、曲線を 86% ~ 94% という平坦な範囲内で維持できる特長があります。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP21582 — 260-W オフライン・マルチ出力 LLC-SRC のリファレンス・デザイン

This reference design uses UCC256302 LLC resonant controller to provide US-line AC input to a 30-V, 250-W output and a 13.8-V, 11-W output conversion. The low-profile design has a maximum height of one inch. This design achieves 94 % peak efficiency at 120-VAC input.
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP21000 — シングル・ステージ、AC/DC 補助電源なし LLC 共振コンバータのリファレンス・デザイン

This reference design provides a 12-V/100-W output from either 120-Vac or 230-Vac input with a single LLC resonant converter stage. The bill of materials (BOM) cost of this design is highly optimized with the single-stage structure and the use of UCC256302 LLC resonant controller. High voltage (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP40281 — LLC 共振コンバータ制御カードのリファレンス・デザイン

This reference design is a a control card for LLC converter. It integrates all of the essential functions for controlling a LLC converter including the HV start-up, X-capacitor discharge and the drivers for the power FETs. By employing the advanced burst mode, it can also help the LLC converter to (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
SOIC (DDB) 14 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ