UCC27201A-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 140°C Ambient Operating Temperature Range
- Device HBM Classification Level 1C
- Device CDM Classification Level C3
- Negative Voltage Handling on HS (–18 V)
- Drives Two N-Channel MOSFETs in High-Side/Low-Side Configuration
- Maximum Boot Voltage: 120 V
- Maximum VDD Voltage: 20 V
- On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode
- Greater than 1 MHz of Operation
- 20-ns Propagation Delay Times
- 3-A Sink, 3-A Source Output Currents
- 8-ns Rise and 7-ns Fall Time with 1000-pF Load
- 1-ns Delay Matching
- Under Voltage Lockout for High-Side and Low-Side Driver
- Offered in 8-Pin PowerPad SOIC-8 (DDA) and 10-Pin VSON (DMK) Packages
The UCC27201A-Q1 high frequency N-Channel MOSFET driver includes a 120-V bootstrap diode and high-side/low-side driver with independent inputs for maximum control flexibility. This allows for N-Channel MOSFET control in half-bridge, full-bridge, two-switch forward and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1-ns between the turn-on and turn-off of each other. The UCC27201A-Q1 is based on the popular UCC27200 and UCC27201 drivers, but offer some enhancements. In order to improve performance in noisy power supply environments the UCC27201A-Q1 has the ability to withstand a maximum of -18 V on its HS pin.
An on-chip bootstrap diode eliminates the external discrete diodes. Under-voltage lockout is provided for both the high-side and the low-side drivers forcing the outputs low if the drive voltage is below the specified threshold.
The UCC27201A-Q1 has TTL-compatible thresholds and is offered in a 10-Pin VSON and an 8-pin SOIC with a thermal pad.
For all available packages, see the orderable addendum at the end of the data sheet.お客様が関心を持ちそうな類似品
比較対象デバイスと同等の機能で、ピン互換製品
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | UCC27201A-Q1 120-V, 3-A Peak, High-Frequency, High-Side/Low-Side Driver データシート (Rev. B) | PDF | HTML | 2016年 3月 23日 | ||
アプリケーション・ノート | Understanding and comparing peak current capability of gate drivers | PDF | HTML | 2021年 3月 30日 | |||
アプリケーション概要 | External Gate Resistor Selection Guide (Rev. A) | 2020年 2月 28日 | ||||
アプリケーション概要 | Understanding Peak IOH and IOL Currents (Rev. A) | 2020年 2月 28日 | ||||
その他の技術資料 | Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) | 2018年 10月 29日 | ||||
アプリケーション・ノート | PFC Design Choice for On Board Charger Designs | 2018年 5月 24日 | ||||
アプリケーション概要 | Reducing Switching Losses in On-Board Chargers for Electric Vehicles | 2018年 3月 27日 | ||||
技術記事 | Are you on-board? Demystifying EV charging systems | PDF | HTML | 2017年 7月 31日 | |||
技術記事 | 48V systems: Driving power MOSFETs efficiently and robustly | PDF | HTML | 2015年 10月 8日 | |||
技術記事 | 48V systems: Design considerations for a typical auxiliary power inverter | PDF | HTML | 2015年 7月 8日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
UCC27201 and UCC27201A PSpice Transient Model (Rev. B)
UCC27201 and UCC27201A TINA-TI Transient Reference Design (Rev. A)
UCC27201 and UCC27201A TINA-TI Transient Spice Model (Rev. A)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TIDA-00281 — オートモーティブ 48V 1kW モータ駆動のリファレンス・デザイン
パッケージ | ピン数 | ダウンロード |
---|---|---|
HSOIC (DDA) | 8 | オプションの表示 |
VSON (DMK) | 10 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。