ホーム パワー・マネージメント ゲート・ドライバ ハーフ・ブリッジ・ドライバ

UCC27201A-Q1

アクティブ

車載、8V UVLO 搭載、負電圧対応、3A、120V、ハーフ・ブリッジ・ゲート・ドライバ

製品詳細

Bootstrap supply voltage (max) (V) 110 Power switch MOSFET Input supply voltage (min) (V) 8 Input supply voltage (max) (V) 17 Peak output current (A) 3 Operating temperature range (°C) -40 to 125 Undervoltage lockout (typ) (V) 8 Rating Automotive Propagation delay time (µs) 0.02 Rise time (ns) 8 Fall time (ns) 7 Iq (mA) 0.001 Input threshold TTL Channel input logic TTL Switch node voltage (V) -15 Features Negative voltage handling Driver configuration Noninverting
Bootstrap supply voltage (max) (V) 110 Power switch MOSFET Input supply voltage (min) (V) 8 Input supply voltage (max) (V) 17 Peak output current (A) 3 Operating temperature range (°C) -40 to 125 Undervoltage lockout (typ) (V) 8 Rating Automotive Propagation delay time (µs) 0.02 Rise time (ns) 8 Fall time (ns) 7 Iq (mA) 0.001 Input threshold TTL Channel input logic TTL Switch node voltage (V) -15 Features Negative voltage handling Driver configuration Noninverting
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 VSON (DMK) 10 16 mm² 4 x 4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 140°C Ambient Operating Temperature Range
    • Device HBM Classification Level 1C
    • Device CDM Classification Level C3
  • Negative Voltage Handling on HS (–18 V)
  • Drives Two N-Channel MOSFETs in High-Side/Low-Side Configuration
  • Maximum Boot Voltage: 120 V
  • Maximum VDD Voltage: 20 V
  • On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode
  • Greater than 1 MHz of Operation
  • 20-ns Propagation Delay Times
  • 3-A Sink, 3-A Source Output Currents
  • 8-ns Rise and 7-ns Fall Time with 1000-pF Load
  • 1-ns Delay Matching
  • Under Voltage Lockout for High-Side and Low-Side Driver
  • Offered in 8-Pin PowerPad SOIC-8 (DDA) and 10-Pin VSON (DMK) Packages
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 140°C Ambient Operating Temperature Range
    • Device HBM Classification Level 1C
    • Device CDM Classification Level C3
  • Negative Voltage Handling on HS (–18 V)
  • Drives Two N-Channel MOSFETs in High-Side/Low-Side Configuration
  • Maximum Boot Voltage: 120 V
  • Maximum VDD Voltage: 20 V
  • On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode
  • Greater than 1 MHz of Operation
  • 20-ns Propagation Delay Times
  • 3-A Sink, 3-A Source Output Currents
  • 8-ns Rise and 7-ns Fall Time with 1000-pF Load
  • 1-ns Delay Matching
  • Under Voltage Lockout for High-Side and Low-Side Driver
  • Offered in 8-Pin PowerPad SOIC-8 (DDA) and 10-Pin VSON (DMK) Packages

The UCC27201A-Q1 high frequency N-Channel MOSFET driver includes a 120-V bootstrap diode and high-side/low-side driver with independent inputs for maximum control flexibility. This allows for N-Channel MOSFET control in half-bridge, full-bridge, two-switch forward and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1-ns between the turn-on and turn-off of each other. The UCC27201A-Q1 is based on the popular UCC27200 and UCC27201 drivers, but offer some enhancements. In order to improve performance in noisy power supply environments the UCC27201A-Q1 has the ability to withstand a maximum of -18 V on its HS pin.

An on-chip bootstrap diode eliminates the external discrete diodes. Under-voltage lockout is provided for both the high-side and the low-side drivers forcing the outputs low if the drive voltage is below the specified threshold.

The UCC27201A-Q1 has TTL-compatible thresholds and is offered in a 10-Pin VSON and an 8-pin SOIC with a thermal pad.

For all available packages, see the orderable addendum at the end of the data sheet.

The UCC27201A-Q1 high frequency N-Channel MOSFET driver includes a 120-V bootstrap diode and high-side/low-side driver with independent inputs for maximum control flexibility. This allows for N-Channel MOSFET control in half-bridge, full-bridge, two-switch forward and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1-ns between the turn-on and turn-off of each other. The UCC27201A-Q1 is based on the popular UCC27200 and UCC27201 drivers, but offer some enhancements. In order to improve performance in noisy power supply environments the UCC27201A-Q1 has the ability to withstand a maximum of -18 V on its HS pin.

An on-chip bootstrap diode eliminates the external discrete diodes. Under-voltage lockout is provided for both the high-side and the low-side drivers forcing the outputs low if the drive voltage is below the specified threshold.

The UCC27201A-Q1 has TTL-compatible thresholds and is offered in a 10-Pin VSON and an 8-pin SOIC with a thermal pad.

For all available packages, see the orderable addendum at the end of the data sheet.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
UCC27282-Q1 アクティブ 車載対応、5V UVLO とインターロックとイネーブル搭載、3A、120V、ハーフブリッジ・ドライバ Adds interlock for greater robustness.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
10 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC27201A-Q1 120-V, 3-A Peak, High-Frequency, High-Side/Low-Side Driver データシート (Rev. B) PDF | HTML 2016年 3月 23日
アプリケーション・ノート Understanding and comparing peak current capability of gate drivers PDF | HTML 2021年 3月 30日
アプリケーション概要 External Gate Resistor Selection Guide (Rev. A) 2020年 2月 28日
アプリケーション概要 Understanding Peak IOH and IOL Currents (Rev. A) 2020年 2月 28日
その他の技術資料 Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) 2018年 10月 29日
アプリケーション・ノート PFC Design Choice for On Board Charger Designs 2018年 5月 24日
アプリケーション概要 Reducing Switching Losses in On-Board Chargers for Electric Vehicles 2018年 3月 27日
技術記事 Are you on-board? Demystifying EV charging systems PDF | HTML 2017年 7月 31日
技術記事 48V systems: Driving power MOSFETs efficiently and robustly PDF | HTML 2015年 10月 8日
技術記事 48V systems: Design considerations for a typical auxiliary power inverter PDF | HTML 2015年 7月 8日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

UCC27201 and UCC27201A PSpice Transient Model (Rev. B)

SLUM096B.ZIP (74 KB) - PSpice Model
シミュレーション・モデル

UCC27201 and UCC27201A TINA-TI Transient Reference Design (Rev. A)

SLUM114A.TSC (193 KB) - TINA-TI Reference Design
シミュレーション・モデル

UCC27201 and UCC27201A TINA-TI Transient Spice Model (Rev. A)

SLUM113A.ZIP (30 KB) - TINA-TI Spice Model
計算ツール

SLURB12 UCC272xx Schematic Review Template

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ハーフ・ブリッジ・ドライバ
UCC27200 8V UVLO 搭載、複数の CMOS 入力、3A、120V ハーフブリッジ・ゲート・ドライバ UCC27200-Q1 車載、8V UVLO 搭載、CMOS 入力、3A、120V、ハーフ・ブリッジ・ゲート・ドライバ UCC27200A 8V UVLO 搭載、負電圧対応、複数の CMOS 入力、3A、120V、ハーフブリッジ・ゲート・ドライバ UCC27201 8V UVLO 搭載、複数の TTL 入力、3A、120V ハーフブリッジ・ゲート・ドライバ UCC27201A 8V UVLO 搭載、負電圧対応、3A、120V、ハーフブリッジ・ゲート・ドライバ UCC27201A-DIE 120V ブート、3A ピーク、高周波数、ハイサイド/ローサイド・ドライバ UCC27201A-Q1 車載、8V UVLO 搭載、負電圧対応、3A、120V、ハーフ・ブリッジ・ゲート・ドライバ UCC27210 8V UVLO 搭載、複数の CMOS 入力、4A、120V ハーフブリッジ・ゲート・ドライバ UCC27211 8V UVLO 搭載、複数の TTL 入力、4A、120V ハーフブリッジ・ゲート・ドライバ UCC27211A 8V UVLO 搭載、負電圧対応、4A、120V ハーフブリッジ・ゲート・ドライバ UCC27211A-Q1 車載、8V UVLO 搭載、負電圧対応、4A、120V、ハーフ・ブリッジ・ゲート・ドライバ UCC27212 5V UVLO 搭載、負電圧対応、4A、120V、ハーフブリッジ・ゲート・ドライバ UCC27212A-Q1 車載、5V UVLO 搭載、4A、120V、ハーフ・ブリッジ・ゲート・ドライバ UCC27282 5V UVLO とインターロックとイネーブル搭載、3A、120V ハーフブリッジ・ゲート・ドライバ UCC27282-Q1 車載対応、5V UVLO とインターロックとイネーブル搭載、3A、120V、ハーフブリッジ・ドライバ UCC27284 5V UVLO、イネーブル搭載、3A、120V ハーフブリッジ・ゲート・ドライバ UCC27284-Q1 車載対応、5V UVLO 搭載、3A、120V、ハーフブリッジ・ゲート・ドライバ UCC27288 8V の UVLO (低電圧ロックアウト) 機能搭載、内部ブートストラップ ダイオードなし、2.5A ~ 3.5A、120V、ハーフブリッジ ドライバ UCC27289 8V UVLO とイネーブル搭載、2.5A ~ 3.5A、120V のハーフブリッジ・ゲート・ドライバ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-00281 — オートモーティブ 48V 1kW モータ駆動のリファレンス・デザイン

TIDA-00281 は、48V の車載アプリケーションで動作する設計を採用した、3 相ブラシレス DC (BLDC) モーター・ドライブです。このボードは、1kW の範囲でモーターを駆動する設計を採用しており、最大 30A の電流を取り扱うことができます。このデザインは、C2000 LaunchPad と組み合わせて 3 相 BLDC モーターを回転させるためのアナログ回路を搭載しており、ホール・エフェクト・センサや直交エンコーダからの位置フィードバックは必要ありません。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HSOIC (DDA) 8 オプションの表示
VSON (DMK) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ