ホーム パワー・マネージメント ゲート・ドライバ ローサイド・ドライバ

UCC27524A

アクティブ

5V UVLO とイネーブル搭載、負の入力電圧に対応、5A/5A、デュアルチャネル・ゲート・ドライバ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
UCC27624 アクティブ 4V UVLO 機能搭載、30V VDD 対応、短い伝搬遅延、5A/5A、デュアルチャネル・ゲート・ドライバ Higher drive strength, higher voltage range and lower propagation delay

製品詳細

Number of channels 2 Power switch GaNFET, IGBT, MOSFET Peak output current (A) 5 Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 18 Features Enable pin Operating temperature range (°C) -40 to 140 Rise time (ns) 7 Fall time (ns) 6 Propagation delay time (µs) 0.013 Input threshold CMOS, TTL Channel input logic Dual, Non-Inverting Input negative voltage (V) -5 Rating Catalog Undervoltage lockout (typ) (V) 4 Driver configuration Dual, Non-Inverting
Number of channels 2 Power switch GaNFET, IGBT, MOSFET Peak output current (A) 5 Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 18 Features Enable pin Operating temperature range (°C) -40 to 140 Rise time (ns) 7 Fall time (ns) 6 Propagation delay time (µs) 0.013 Input threshold CMOS, TTL Channel input logic Dual, Non-Inverting Input negative voltage (V) -5 Rating Catalog Undervoltage lockout (typ) (V) 4 Driver configuration Dual, Non-Inverting
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9 SOIC (D) 8 29.4 mm² 4.9 x 6
  • Industry-Standard Pin Out
  • Two Independent Gate-Drive Channels
  • 5-A Peak Source and Sink-Drive Current
  • Independent-Enable Function for Each Output
  • TTL and CMOS Compatible Logic Threshold
    Independent of Supply Voltage
  • Hysteretic-Logic Thresholds for High Noise
    Immunity
  • Ability to Handle Negative Voltages (–5 V)
    at Inputs
  • Inputs and Enable Pin-Voltage Levels Not
    Restricted by VDD Pin Bias Supply Voltage
  • 4.5 to 18-V Single-Supply Range
  • Outputs Held Low During VDD-UVLO (Ensures
    Glitch-Free Operation at Power Up and Power Down)
  • Fast Propagation Delays (13-ns Typical)
  • Fast Rise and Fall Times (7-ns and 6-ns Typical)
  • 1-ns Typical Delay Matching Between 2-Channels
  • Two Outputs are Paralleled for Higher Drive
    Current
  • Outputs Held in Low When Inputs Floating
  • SOIC-8, HVSSOP-8 PowerPAD Package Options
  • Operating Temperature Range of –40 to 140°C
  • Industry-Standard Pin Out
  • Two Independent Gate-Drive Channels
  • 5-A Peak Source and Sink-Drive Current
  • Independent-Enable Function for Each Output
  • TTL and CMOS Compatible Logic Threshold
    Independent of Supply Voltage
  • Hysteretic-Logic Thresholds for High Noise
    Immunity
  • Ability to Handle Negative Voltages (–5 V)
    at Inputs
  • Inputs and Enable Pin-Voltage Levels Not
    Restricted by VDD Pin Bias Supply Voltage
  • 4.5 to 18-V Single-Supply Range
  • Outputs Held Low During VDD-UVLO (Ensures
    Glitch-Free Operation at Power Up and Power Down)
  • Fast Propagation Delays (13-ns Typical)
  • Fast Rise and Fall Times (7-ns and 6-ns Typical)
  • 1-ns Typical Delay Matching Between 2-Channels
  • Two Outputs are Paralleled for Higher Drive
    Current
  • Outputs Held in Low When Inputs Floating
  • SOIC-8, HVSSOP-8 PowerPAD Package Options
  • Operating Temperature Range of –40 to 140°C

The UCC27524A device is a dual-channel, high-speed, low-side, gate-driver device capable of effectively driving MOSFET and IGBT power switches. The UCC27524A is a variant of the UCC2752x family. The UCC27524A adds the ability to handle –5 V directly at the input pins for increased robustness. The UCC27524A is a dual non-inverting driver. Using a design that inherently minimizes shoot-through current, the UCC27524A is capable of delivering high-peak current pulses of up to 5-A source and 5-A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay typically 13 ns. In addition, the drivers feature matched internal propagation delays between the two channels which are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with a single input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.

For safety purpose, internal pull-up and pull-down resistors on the input pins of the UCC27524A ensure that outputs are held LOW when input pins are in floating condition. UCC27524A features Enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.

UCC27524A family of devices are available in SOIC-8 (D), VSSOP-8 with exposed pad (DGN) packages.

The UCC27524A device is a dual-channel, high-speed, low-side, gate-driver device capable of effectively driving MOSFET and IGBT power switches. The UCC27524A is a variant of the UCC2752x family. The UCC27524A adds the ability to handle –5 V directly at the input pins for increased robustness. The UCC27524A is a dual non-inverting driver. Using a design that inherently minimizes shoot-through current, the UCC27524A is capable of delivering high-peak current pulses of up to 5-A source and 5-A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay typically 13 ns. In addition, the drivers feature matched internal propagation delays between the two channels which are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with a single input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.

For safety purpose, internal pull-up and pull-down resistors on the input pins of the UCC27524A ensure that outputs are held LOW when input pins are in floating condition. UCC27524A features Enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.

UCC27524A family of devices are available in SOIC-8 (D), VSSOP-8 with exposed pad (DGN) packages.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC27524A Dual 5-A, High-Speed, Low-Side Gate Driver With Negative Input Voltage Capability データシート (Rev. B) PDF | HTML 2013年 10月 16日
アプリケーション概要 External Gate Resistor Selection Guide (Rev. A) 2020年 2月 28日
アプリケーション概要 Understanding Peak IOH and IOL Currents (Rev. A) 2020年 2月 28日
アプリケーション・ノート Improving Efficiency of DC-DC Conversion through Layout 2019年 5月 7日
アプリケーション概要 How to overcome negative voltage transients on low-side gate drivers' inputs 2019年 1月 18日
その他の技術資料 Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) 2018年 10月 29日
技術記事 Know your gate driver PDF | HTML 2017年 3月 23日
技術記事 How to achieve higher system efficiency- part one: high-current gate drivers PDF | HTML 2016年 11月 16日
技術記事 The secret life of MOSFET/IGBT gate drivers PDF | HTML 2015年 9月 14日
EVM ユーザー ガイド (英語) Using the UCC27714EVM-551 (Rev. A) 2015年 9月 14日
ホワイト・ペーパー GaNの将来性に基づく電源ソリューションの向上 英語版 2015年 3月 2日
その他の技術資料 Design Review of a Full-Featured 350-W Offline Power Converter 2013年 10月 29日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCC27423-4-5-Q1EVM — UCC2742xQ1 イネーブル付き、デュアル、4A、高速ローサイド MOSFET ドライバの評価モジュール(EVM)

The UCC2742xQ1 EVM is a high-speed dual MOSFET evaluation module that provides a test platform for a quick and easy startup of the UCC2742xQ1 driver. Powered by a single 4V to 15V external supply, and featuring a comprehensive set of test points and jumpers. All of the devices have separate input (...)
ユーザー ガイド: PDF
評価ボード

UCC27714EVM-551 — UCC27714 600W フェーズ・シフト・フル・ブリッジ・コンバータ評価モジュール

This 600W EVM was designed to demonstrate how the UCC28950 control IC, UCC27524A and UCC27714 gate drivers could be used in a phase shifted full bridge converter that achieves ZVS from 50 to 100% load. 

ユーザー ガイド: PDF
シミュレーション・モデル

UCC27524 PSpice Transient Model

SLUM243.ZIP (28 KB) - PSpice Model
シミュレーション・モデル

UCC27524 TINA-TI Transient Reference Design

SLUM257.TSC (89 KB) - TINA-TI Reference Design
シミュレーション・モデル

UCC27524 TINA-TI Transient Spice Model

SLUM256.ZIP (8 KB) - TINA-TI Spice Model
計算ツール

SLURB22 UCC2752X Schematic Review Template

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ローサイド・ドライバ
UCC27523 5V UVLO とイネーブル搭載、複数の反転入力、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27524 5V UVLO とイネーブルと 1ns の遅延整合機能搭載、5A/5A デュアルチャネル・ゲート・ドライバ UCC27524A 5V UVLO とイネーブル搭載、負の入力電圧に対応、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27524A-Q1 車載、5V UVLO 搭載、負の入力電圧に対応、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27524A1-Q1 車載、5V UVLO 搭載、負の入力電圧に対応、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27525 5V UVLO とイネーブル搭載、反転入力と非反転入力、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27526 5V UVLO とイネーブル搭載、デュアル TTL 入力、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27527 5V UVLO とイネーブル搭載、デュアル CMOS 入力、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27528 5V UVLO とイネーブル搭載、複数の CMOS 入力、5A/5A、デュアルチャネル・ゲート・ドライバ UCC27528-Q1 車載、5V UVLO 搭載、複数の CMOS 入力、5A/5A、デュアルチャネル・ゲート・ドライバ
計算ツール

SLURB23 UCC27524A Schematic Review Template

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ローサイド・ドライバ
UCC27524A 5V UVLO とイネーブル搭載、負の入力電圧に対応、5A/5A、デュアルチャネル・ゲート・ドライバ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDM-1001 — C2000™ マイコンを使用する 2相インターリーブ LLC 共振コンバータのリファレンス・デザイン

共振コンバータは、サーバー、テレコム、車載、産業用などの電源アプリケーションで採用されている DC/DC コンバータです。効率と電力密度が高く、さまざまな業界標準や電力密度要件に対応しており、中電力から大電力アプリケーション向けのコンバータとして最適です。

このリファレンス・デザインは、デジタル制御 500W 2 相インターリーブ LLC 共振コンバータを実装しています。このシステムの制御は、単一の C2000™ マイコン (MCU) である TMS320F280025C (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-010216 — 大容量アプリケーション向け、ローサイド MOSFET 制御機能採用、16S バッテリ・パックのリファレンス・デザイン

このリファレンス・デザインは、スタンバイ・モードとシップ・モードの消費電流が小さく、セル電圧の精度が高い、16S (16 個の直列) リチウムイオン、または LiFePO4 バッテリ・パック向けのデザインです。本デザインは、セル過電圧、セル低電圧、過熱、充電および放電時過電流、放電時短絡の状態にならないように、各セルの電圧、パックの電流、セルと MOSFET の温度を高精度で監視しリチウムイオンおよび LiFePO4 バッテリ・パックを保護します。5 ペアのローサイド N チャネル MOSFET アーキテクチャを、強力なオン / (...)
設計ガイド: PDF
リファレンス・デザイン

TIDA-01367 — Cavium CN99xx Thunder X2 CPU PMBus VDD/VDD SRAM コア電源のデザイン

The TIDA-01367 reference design uses the TPS53679 multiphase controller and CSD95490Q5MC Smart Power Stages to implement a high-performance design suitable for powering Cavium ThunderX2® ARM Processors.

The dual outputs of the controller target a 240-A, 0.8-V core rail with a six-phase design and a (...)

設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01512 — NXP QorIQ LS2085A / 88A プロセッサ向け PMBus 電圧レギュレータのリファレンス・デザイン

TIDA-01512 は、TPS53681 マルチフェーズ・コントローラと CSD95490Q5MC スマート出力団を採用し、NXP QorIQ 通信プロセッサへの電力供給に最適な高性能デザインを実装しています。

このコントローラのデュアル出力がターゲットにしている設計は、4 相の 60ATDC(Thermal Design Current、熱設計電流 60A)、1.0V のコア電圧レールと、30ATDC、1.2V の補助レールを供給する仕様です。スマート出力段と内蔵の PMBus™ 機能を採用しており、出力電圧の容易な設定、主な設計パラメータの遠隔測定、補償の調整が可能です。

(...)

設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HVSSOP (DGN) 8 オプションの表示
SOIC (D) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ