ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ PWM コントローラ

UCC28250

アクティブ

プリバイアス動作対応、高性能ハーフ・ブリッジ / フルブリッジ PWM コントローラ

製品詳細

Topology Forward, Full bridge, Half bridge, Push pull Control mode Current, Voltage Duty cycle (max) (%) 100 Switching frequency (max) (kHz) 1000 Features Current limiting, High-voltage startup, SR logic UVLO thresholds on/off (V) 4.3/4.1 Operating temperature range (°C) -40 to 125 Rating Catalog Gate drive (typ) (A) 0.2 Vin (max) (V) 17
Topology Forward, Full bridge, Half bridge, Push pull Control mode Current, Voltage Duty cycle (max) (%) 100 Switching frequency (max) (kHz) 1000 Features Current limiting, High-voltage startup, SR logic UVLO thresholds on/off (V) 4.3/4.1 Operating temperature range (°C) -40 to 125 Rating Catalog Gate drive (typ) (A) 0.2 Vin (max) (V) 17
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4 VQFN (RGP) 20 16 mm² 4 x 4
  • Prebiased Start-up
  • Synchronous Rectifier Control Outputs With Programmable Delays (Including Zero Delay Support)
  • Voltage Mode Control With Input Voltage Feed-Forward or Current Mode Control
  • Primary or Secondary-Side Control
  • 3.3-V, 1.5% Accurate Reference Output
  • 1-MHz Capable Switching Frequency
  • 1% Accurate Cycle-by-Cycle Overcurrent Protection with Matched Duty Cycle Outputs
  • Programmable Soft-Start and Hiccup Restart Timer
  • Thermally Enhanced 4-mm × 4-mm QFN-20 Package and 20-pin TSSOP Package
  • Prebiased Start-up
  • Synchronous Rectifier Control Outputs With Programmable Delays (Including Zero Delay Support)
  • Voltage Mode Control With Input Voltage Feed-Forward or Current Mode Control
  • Primary or Secondary-Side Control
  • 3.3-V, 1.5% Accurate Reference Output
  • 1-MHz Capable Switching Frequency
  • 1% Accurate Cycle-by-Cycle Overcurrent Protection with Matched Duty Cycle Outputs
  • Programmable Soft-Start and Hiccup Restart Timer
  • Thermally Enhanced 4-mm × 4-mm QFN-20 Package and 20-pin TSSOP Package

The UCC28250 PWM controller is designed for high power density applications that may have stringent prebiased start-up requirements. The integrated synchronous rectifier control outputs target high-efficiency and high-performance topologies such as half-bridge, full-bridge, interleaved forward, and push-pull. The UCC27200 half-bridge drivers and UCC2732X MOSFET drivers used in conjunction with the UCC28250 provide a complete power converter solution.

Externally programmable soft-start, used in conjunction with an internal prebiased start-up circuit, allows the controller to gradually reach a steady-state operating point under all output conditions. The UCC28250 can be configured for primary or secondary-side control and either voltage or current mode control can be implemented.

The oscillator operates at frequencies up to 2 MHz, and can be synchronized to an external clock. Input voltage feedforward, cycle-by-cycle current limit, and a programmable hiccup timer allow the system to stay within a safe operation range. Input voltage, output voltage and temperature protection can be implemented. Dead time between primary-side switch and secondary-side synchronous rectifiers can be independently programmed.

The UCC28250 PWM controller is designed for high power density applications that may have stringent prebiased start-up requirements. The integrated synchronous rectifier control outputs target high-efficiency and high-performance topologies such as half-bridge, full-bridge, interleaved forward, and push-pull. The UCC27200 half-bridge drivers and UCC2732X MOSFET drivers used in conjunction with the UCC28250 provide a complete power converter solution.

Externally programmable soft-start, used in conjunction with an internal prebiased start-up circuit, allows the controller to gradually reach a steady-state operating point under all output conditions. The UCC28250 can be configured for primary or secondary-side control and either voltage or current mode control can be implemented.

The oscillator operates at frequencies up to 2 MHz, and can be synchronized to an external clock. Input voltage feedforward, cycle-by-cycle current limit, and a programmable hiccup timer allow the system to stay within a safe operation range. Input voltage, output voltage and temperature protection can be implemented. Dead time between primary-side switch and secondary-side synchronous rectifiers can be independently programmed.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC28250 Advanced PWM Controller With Prebias Operation データシート (Rev. D) PDF | HTML 2015年 6月 28日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート Differences Between the UCC28251 and UCC28250 and Evaluation of the UCC28251 in (Rev. A) 2013年 2月 15日
EVM ユーザー ガイド (英語) Using the UCC28250EVM-564 (Rev. A) 2011年 10月 7日
EVM ユーザー ガイド (英語) Using the UCC28250EVM-501 Half Bridge DC-DC Converter with Primary Side Control (Rev. B) 2010年 12月 7日
アプリケーション・ノート Designing UCC28250 as a Secondary Side Control with a Pre-Bias Condition 2010年 11月 24日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCC28250EVM-501 — 評価モジュール、UCC28250 用、1 次側制御、高性能 PWM コントローラ

The UCC28250EVM-501 is a fully assembled and tested circuit for evaluating the UCC28250 Advanced PWM Controller with Pre-Bias Operation. The UCC28250EVM-501 comprises a symmetrical half-bridge DC/DC converter, which converts a 36V to 72V DC input to a 3.3V DC output with a maximum 75W output power.
ユーザー ガイド: PDF
評価ボード

UCC28250EVM-564 — 評価モジュール、UCC28250 PWM コントローラ用、プリバイアス負荷動作、 2 次側制御付

The UCC28250EVM-564 is a fully assembled and tested circuit for evaluating the UCC28250 Advanced PWM Controller with Pre-Bias Operation. The UCC28250EVM-564 comprises a symmetrical half bridge DC-DC converter which converts a 36V to 75V DC input to a 3.3V DC output with 100W maximum output power.
ユーザー ガイド: PDF
シミュレーション・モデル

UCC28250 Unencrypted PSPICE Average Model Package (Rev. A)

SLUM171A.ZIP (96 KB) - PSpice Model
計算ツール

SLUC260 UCC28250 Excel Design Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
PWM コントローラ
UCC28250 プリバイアス動作対応、高性能ハーフ・ブリッジ / フルブリッジ PWM コントローラ
リファレンス・デザイン

PMP8878 — 1/8 ブリック絶縁 DC/DC テレコム電源モジュール、UCC28250 ベース

PMP8878 is a full-function 1/8th brick isolated DC/DC telecom power module based on UCC28250 advanced PWM controller. The reference design features secondary side control and hard switching full bridge power topology to deliver 12V/180W of output power operating across a wide range 40V-75V input (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
TSSOP (PW) 20 オプションの表示
VQFN (RGP) 20 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ