ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ フライバック・コントローラ

UCC28720

アクティブ

1 次側レギュレーション機能搭載、バイポーラ・パワー・デバイス向け、定電圧、定電流コントローラ

製品詳細

Control mode Primary-side regulation UVLO thresholds on/off (V) 21/7.7 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 80 Features CC/CV output regulation, Current limiting, DCM, Green mode, High voltage startup, High-voltage startup, Input line monitor, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, PSR, Primary-side regulated, Soft start Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
Control mode Primary-side regulation UVLO thresholds on/off (V) 21/7.7 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 80 Features CC/CV output regulation, Current limiting, DCM, Green mode, High voltage startup, High-voltage startup, Input line monitor, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, PSR, Primary-side regulated, Soft start Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
SOIC (D) 7 29.4 mm² 4.9 x 6
  • < 10-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-
    Coupler
  • ±5% Voltage and Current Regulation Across Line
    and Load
  • 700-V Start-Up Switch
  • 80-kHz Maximum Switching Frequency Enables
    High-Power Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for
    Highest Overall Efficiency
  • Wide VDD Range Allows Small Bias Capacitor
  • Dynamic BJT Drive
  • Overvoltage, Low-Line, and Overcurrent
    Protection Functions
  • Programmable Cable Compensation
  • SOIC-7 Package
  • < 10-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-
    Coupler
  • ±5% Voltage and Current Regulation Across Line
    and Load
  • 700-V Start-Up Switch
  • 80-kHz Maximum Switching Frequency Enables
    High-Power Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for
    Highest Overall Efficiency
  • Wide VDD Range Allows Small Bias Capacitor
  • Dynamic BJT Drive
  • Overvoltage, Low-Line, and Overcurrent
    Protection Functions
  • Programmable Cable Compensation
  • SOIC-7 Package

The UCC28720 flyback power supply controller provides isolated-output Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

An internal 700-V start-up switch, dynamically-controlled operating states and a tailored modulation profile support ultra-low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28720 allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a bipolar transistor power switch. Discontinuous conduction mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28720 allows compensation for voltage drop in the cable to be programmed with an external resistor.

The UCC28720 flyback power supply controller provides isolated-output Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

An internal 700-V start-up switch, dynamically-controlled operating states and a tailored modulation profile support ultra-low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28720 allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a bipolar transistor power switch. Discontinuous conduction mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28720 allows compensation for voltage drop in the cable to be programmed with an external resistor.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
11 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC28720 Constant-Voltage, Constant-Current Controller With Primary-Side Regulation データシート (Rev. B) PDF | HTML 2015年 9月 30日
アプリケーション・ノート Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 2021年 8月 31日
アプリケーション・ノート Minimize Standby Consumption for UCC287XX Family 2019年 8月 1日
アプリケーション・ノート Maximum Output Power and Thermal Considerations for UCC28720 and UCC28722 2017年 12月 6日
アプリケーション・ノート Troubleshooting TI PSR controllers 2016年 10月 3日
技術記事 Slim down your flyback; lose that excess snubber PDF | HTML 2016年 2月 15日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters 2015年 10月 2日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters (PPT) 2015年 10月 2日
技術記事 Designing multiple output converters with primary side sensing PDF | HTML 2015年 8月 4日
アプリケーション・ノート 5-W USB Flyback Design Example Using the UCC28722 2014年 1月 8日
EVM ユーザー ガイド (英語) Using the UCC28720EVM-212 (Rev. A) 2013年 9月 20日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCC28720EVM-212 — UCC28720EVM-212 5W 評価基板、USB オフライン・アダプタ用

The UCC28720EVM-212 is a 5W evaluation module for evaluating an off line adapter for USB applications. It is intended for evaluation purposes and is not intended to be an end product. The UCC28720EVM-212 converters 100V to 240V RMS input voltage down to 5V DC, with a 1A current limit for USB (...)
ユーザー ガイド: PDF
計算ツール

SLUC528 UCC28722 MathCad Design Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
フライバック・コントローラ
UCC28720 1 次側レギュレーション機能搭載、バイポーラ・パワー・デバイス向け、定電圧、定電流コントローラ UCC28722 バイポーラ・パワー・デバイス向け、1 次側レギュレーション搭載、低コスト CVCC フライバック・コントローラ
計算ツール

SLUC529 UCC28722 Excel Design Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
フライバック・コントローラ
UCC28720 1 次側レギュレーション機能搭載、バイポーラ・パワー・デバイス向け、定電圧、定電流コントローラ UCC28722 バイポーラ・パワー・デバイス向け、1 次側レギュレーション搭載、低コスト CVCC フライバック・コントローラ
リファレンス・デザイン

PMP20744 — BJT 搭載、85V ~ 265VAC 入力、12V/3W 低コスト・フライバックのリファレンス・デザイン

This 12V/3W reference design is optimized for very low cost and yet maintains good efficiency. Two key factors for minimizing cost are a BJT is used for the main power switch, and primary-side regulation (PSR) eliminates the need for an optocoupler. The UCC28720 quasi-resonant flyback controller (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP8678 — 高電圧入力(184Vac...707Vac)から 12V@1A、3.3V@100mA 非絶縁フライバック、リファレンス・デザイン

UCC28720 は、擬似共振コントローラであり、高電圧 BJT を駆動する目的に特化しています。ドレイン電圧が 1KV を上回っている場合は、ローパワーや中出力のフライバック・コンバータにとって BJT が最善の選択肢です。このデザインでは、12V@1A および 3.3V@100mA という 2 つの出力電圧が供給されます。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9622 — 350W 定電圧 - 定電流(CVCC)位相シフト・フル・ブリッジ、リファレンス・デザイン

このリファレンス・デザインでは UCC3895 位相シフト・フルブリッジ・コントローラを使用して、120VAC の入力から、44Vdc、最大 8A の出力への高効率変換を実装します。  この電源は、定電圧/定電流を供給するように設定されています。  電圧と電流は、固定抵抗の値で設定しますが、実際の製品ではマイクロプロセッサを使用して設定することもできます。  UCC28720 PWM コントローラを使用した低コストの BJT フライバックにより、このデザインにバイアスを印加しています。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9649 — リファレンス・デザイン - ユニバーサル・ライン入力 AC-DC 3W ハイ・サイド降圧コンバータ、UCC28720 使用

PMP9649 リファレンス・デザインは、簡潔で低コストのハイサイド降圧コンバータであり、UCC28720 コントローラを使用して、ユニバーサル AC 入力電圧(85Vac ~ 265Vac)を非絶縁型の 20V/150mA DC 出力に変換します。コスト最適化の目的で BJT を降圧スイッチとして使用し、UCC28720 に内蔵されているサンプル・アンド・ホールド・レギュレーション機能により簡潔さを実現します。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9243 — 一次側調整付きフライバック、産業用 AC 入力 (最大 583VAC) 用、バイポーラ・トランジスタ付き

PMP9243 リファレンス・デザインでは、1 次側安定化フライバック・コントローラである UCC28720 を使用して、産業用の AC 入力(最大 583VAC)を受け入れ、15V/0.25A の出力を生成します。1 次側のスイッチとしてバイポーラ・トランジスタを使用し、電流コストを最小化しています。
試験報告書: PDF
リファレンス・デザイン

PMP9517 — 小型フォーム・ファクタ 10W オフライン・フライバック電源

PMP9517 は、定電圧/定電流に対応した高密度の電源であり、85VAC ~ 265VAC の入力レンジで、5V/10W の出力を供給します。このデザインでは、低コストのパワー・トランジスタ(BJT)による 1 次側レギュレーション(PSR)を特長としています。少ない部品数および低コストという特徴により、このデザインは、スマートフォン、タブレット、PDA、デジタル・カメラで使用される USB タイプの電源に適しています。このデザインは PMP9135 に似ていますが、全体のサイズがより小型になっています。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9135 — 85 VAC ~ 265 VAC 入力、5 V/10 W 低コスト・フライバック、BJT 付き

定電圧/定電流の電源で、5V、2A の出力を生成します。このデザインでは、パワー・トランジスタ(BJT)による 1 次側レギュレーション(PSR)を特長としています。少ない部品数および低コストという特徴により、このデザインは、PDA、タブレット、カメラ、携帯電話とスマートフォンを想定した USB タイプの電源で使用できます。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9235 — 120 VAC 入力、5 V/250 mA フライバックコンバータ、BJT スイッチ付き

このリファレンス・デザインは、120VAC の入力から、5V、250mA の出力を供給します。1 次側コントローラである UCC28720 を BJT パワー・スイッチと組み合わせ、低コストのデザインを実現しています。出力は、(安全性の意味ではなく)機能の面でのみ入力から絶縁されていることに注意してください。
試験報告書: PDF
リファレンス・デザイン

PMP9059 — 120 VAC 入力、5 V/200 mA フライバックコンバータ、BJT スイッチ付き

このリファレンス・デザインは、120VAC の入力から、5V、200mA の出力を供給します。この電源は、全体の高さがおよそ 10mm であり、非常に小さい体積に収容できるように設計されています。1 次側コントローラである UCC28720 を BJT パワー・スイッチと組み合わせ、低コストのデザインを実現しています。また、TPS71433 も使用して、追加の 3.3V レールを供給しています。出力は、(安全性の意味ではなく)機能の面でのみ入力から絶縁されていることに注意してください。
試験報告書: PDF
リファレンス・デザイン

PMP9044 — 一次側安定化フライバック、ユニバーサル 3 相 AC 入力用、バイポーラ・トランジスタ付き

PMP9044 リファレンス・デザインでは、1 次側安定化(PSR)フライバック・コントローラである UCC28720 を使用して、三相ユニバーサル AC 入力から 3.3V/0.5A の出力を生成します。1 次側のスイッチとしてバイポーラ・トランジスタを使用し、回路コストを最小化しています。
試験報告書: PDF
パッケージ ピン数 ダウンロード
SOIC (D) 7 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ