ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ フライバック・コントローラ

UCC28911

アクティブ

定電圧、定電流、1 次側レギュレーション機能搭載、700V フライバック・スイッチャ

製品詳細

Control mode Current, Primary-side regulation, Voltage UVLO thresholds on/off (V) 9.5/6.5 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 115 Features Adjustable switching frequency, Current limiting, Green mode, High voltage startup, High-voltage startup, Input line monitor, Integrated Switch, IoT compatible, Leading edge blanking, Light load efficiency, Light-load efficiency, Overcurrent protection, Overtemperature protection, Soft start, Thermal shutdown Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
Control mode Current, Primary-side regulation, Voltage UVLO thresholds on/off (V) 9.5/6.5 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 115 Features Adjustable switching frequency, Current limiting, Green mode, High voltage startup, High-voltage startup, Input line monitor, Integrated Switch, IoT compatible, Leading edge blanking, Light load efficiency, Light-load efficiency, Overcurrent protection, Overtemperature protection, Soft start, Thermal shutdown Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
SOIC (D) 7 29.4 mm² 4.9 x 6
  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection
  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltageand current regulation without the use of an optical coupler. Both devices incorporate a 700-Vpower FET and a controller that process operating information from the flyback auxiliary windingand power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enablethe very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peakprimary current modulation, allow operating efficiencies to meet or exceed applicable standards.Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses.Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltageand current regulation without the use of an optical coupler. Both devices incorporate a 700-Vpower FET and a controller that process operating information from the flyback auxiliary windingand power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enablethe very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peakprimary current modulation, allow operating efficiencies to meet or exceed applicable standards.Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses.Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC28910, UCC28911 High-Voltage Flyback Switcher with Primary-Side Regulation and Output Current Control データシート (Rev. D) PDF | HTML 2016年 12月 19日
アプリケーション・ノート Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 2021年 8月 31日
技術記事 Overcoming common design challenges in an UV sterilization box system PDF | HTML 2020年 7月 27日
技術記事 Making a solar inverter more reliable than the sun PDF | HTML 2017年 8月 1日
アプリケーション・ノート Troubleshooting TI PSR controllers 2016年 10月 3日
技術記事 Differences between PSR and SSR in bias power-supply design PDF | HTML 2016年 4月 8日
技術記事 Design an energy-efficient, lower-acoustic cooker hood with an elegant user interf PDF | HTML 2016年 3月 29日
技術記事 Power Tips: Power converter topology/component selections in high input voltage ap PDF | HTML 2015年 10月 7日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters 2015年 10月 2日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters (PPT) 2015年 10月 2日
技術記事 Designing multiple output converters with primary side sensing PDF | HTML 2015年 8月 4日
EVM ユーザー ガイド (英語) Using the UCC28911EVM-718 2015年 3月 6日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCC28911EVM-718 — UCC28911 評価モジュール

The UCC28911EVM-718 evaluation module is an offline Flyback power supply that provides isolated output voltage and current regulation without the use of an optocoupler and secondary-side feedback components. The input accepts a voltage range of 85VAC to 265VAC, 47Hz to 64Hz. The evaluation module (...)

ユーザー ガイド: PDF
サポート・ソフトウェア

PMP4367 — Energy Star 6 効率定格ユニバーサル AC 入力 6W アダプタ

この 5V/1.2A のアダプタ ソリューションは、包括的なテストを通じて、EMI (電磁干渉) と EMC (CE、RE) (電磁適合性) の各安全性要件に合格済みです。高効率 1 次側コントローラである UCC28910 を実装しています。このデザインの効率は Energy Star 6 に準拠しており、小型フォーム ファクタのハウジングに収容できる設計を採用しています。このデザインのサイズは 36mm x 30mm x 15mm で、放熱の特性評価が完了しています。温度範囲全体にわたって、無負荷時電力は 30mW 未満という効率的な値です。低コストのトランスである EE16 (...)
計算ツール

SLUC624 UCC28911 Design Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
フライバック・コントローラ
UCC28911 定電圧、定電流、1 次側レギュレーション機能搭載、700V フライバック・スイッチャ

多くの TI リファレンス デザインには、UCC28911 があります。

TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。

パッケージ ピン数 ダウンロード
SOIC (D) 7 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ