ホーム パワー・マネージメント デジタル電源 IC デジタル電源絶縁型コントローラ

UCD3138128A

アクティブ

絶縁電源向け、高集積デジタル・コントローラ

製品詳細

Number of outputs 8 Frequency (max) (MHz) 2 Number of ADC channels 15 Analog comparators 7 Communication interface 1 SPI, 2 I2C, 2 PMBUS, 2 UART Compensator 2-pole/2-zero (PID hardware) DPWM resolution (ps) 250 Number of GPIOs 43 Number of digital-power peripheral feedback loops 3 Nonvolatile memory (Byte) 128k (program), 2k (data) Processor 31.25MHz, 32-bit ARM7 Operating temperature range (°C) -40 to 125 Rating Catalog
Number of outputs 8 Frequency (max) (MHz) 2 Number of ADC channels 15 Analog comparators 7 Communication interface 1 SPI, 2 I2C, 2 PMBUS, 2 UART Compensator 2-pole/2-zero (PID hardware) DPWM resolution (ps) 250 Number of GPIOs 43 Number of digital-power peripheral feedback loops 3 Nonvolatile memory (Byte) 128k (program), 2k (data) Processor 31.25MHz, 32-bit ARM7 Operating temperature range (°C) -40 to 125 Rating Catalog
TQFP (PFC) 80 196 mm² 14 x 14
  • 128 kB Program Flash Derivative of UCD3138xA Family
    • 4-32 kB Program Flash Memory Banks
    • Supports Execution From 1 Bank, While Programming Another
    • Capability to Update Firmware Without Shutting Down the Power Supply
    • Additional Communication Ports Compared to the UCD3138xA (+1 SPI, +1 I2C)
    • Boot Flash Based Dual Memory Image Support for ‘On the Fly’ Firmware Updates
  • Synchronous Rectifier Dead Time Optimization Peripheral to Use with UCD7138 Synchronous Rectifier Driver
  • Digital Control of up to 3 Independent Feedback Loops
    • Dedicated PID Based Hardware
    • 2-pole/2-zero Configurable, Non-Linear Control
  • Up to 16 MSPS Error A/D Converter (EADC)
    • Configurable Resolution (min: 1 mV/LSB)
    • Up to 8x Oversampling and Adaptive Sample Positioning
    • Hardware Based Averaging (up to 8x)
    • 14 bit Effective Reference DAC
  • Up to 8 High Resolution Digital Pulse Width Modulated (DPWM) Outputs
    • 250 ps Pulse Width Resolution
    • 4 ns Frequency and Phase Resolution
    • Adjustable Phase Shift and Dead-bands
    • Cycle-by-Cycle Duty Cycle Matching
    • Up to 2 MHz Switching Frequency
  • Configurable Trailing/Leading/Triangular Modulation
  • RTC Support
  • External Crystal Interface
  • Configurable Feedback Control
    • Voltage, Average Current and Peak Current Mode Control
    • Constant Current, Constant Power
  • Configurable FM, Phase Shift Modulation and PWM
  • Fast, Automatic and Smooth Mode Switching
    • Frequency Modulation and PWM
    • Phase Shift Modulation and PWM
  • High Efficiency and Light Load Management
    • Burst Mode and Ideal Diode Emulation
    • Synchronous Rectifier Soft On/Off
    • Low IC Standby Power
  • Primary Side Voltage Sensing
  • Current Share (Average and Master/Slave)
  • Feature Rich Fault Protection Options
    • 7 Analog / 4 Digital Comparators,
    • Cycle-by-Cycle Current Limiting
    • Programmable Blanking Time and Fault Counting
    • External Fault Inputs
  • Synchronization of DPWM Waveforms Between Multiple UCD3138x Devices
  • 15 channel, 12 bit, 539 ksps General Purpose ADC
  • Internal Temperature Sensor
  • Fully ProgrammableHigh-Performance 31.25 MHz, 32-bit ARM7TDMI-S Processor
    • 128 kB Program Flash (4-32 kB Banks)
    • 2 kB Data Flash with ECC
    • 8 kB Data RAM
    • 8 kB Boot ROM Enables Firmware Boot-Load\
  • Communication Peripherals,
    • 2 - I2C/PMBus interfaces
    • 2 - UARTs, 1 - SPI
  • UART Auto Baud Rate Adjustment
  • Timer Capture with Selectable Input Pins
  • 80-pin QFP Package
  • Operating Temperature: –40°C to 125°C
  • Debug Interface
    • Code Composer Studio with JTAG Interface
    • Fusion Digital Power Designer GUI Support
  • 128 kB Program Flash Derivative of UCD3138xA Family
    • 4-32 kB Program Flash Memory Banks
    • Supports Execution From 1 Bank, While Programming Another
    • Capability to Update Firmware Without Shutting Down the Power Supply
    • Additional Communication Ports Compared to the UCD3138xA (+1 SPI, +1 I2C)
    • Boot Flash Based Dual Memory Image Support for ‘On the Fly’ Firmware Updates
  • Synchronous Rectifier Dead Time Optimization Peripheral to Use with UCD7138 Synchronous Rectifier Driver
  • Digital Control of up to 3 Independent Feedback Loops
    • Dedicated PID Based Hardware
    • 2-pole/2-zero Configurable, Non-Linear Control
  • Up to 16 MSPS Error A/D Converter (EADC)
    • Configurable Resolution (min: 1 mV/LSB)
    • Up to 8x Oversampling and Adaptive Sample Positioning
    • Hardware Based Averaging (up to 8x)
    • 14 bit Effective Reference DAC
  • Up to 8 High Resolution Digital Pulse Width Modulated (DPWM) Outputs
    • 250 ps Pulse Width Resolution
    • 4 ns Frequency and Phase Resolution
    • Adjustable Phase Shift and Dead-bands
    • Cycle-by-Cycle Duty Cycle Matching
    • Up to 2 MHz Switching Frequency
  • Configurable Trailing/Leading/Triangular Modulation
  • RTC Support
  • External Crystal Interface
  • Configurable Feedback Control
    • Voltage, Average Current and Peak Current Mode Control
    • Constant Current, Constant Power
  • Configurable FM, Phase Shift Modulation and PWM
  • Fast, Automatic and Smooth Mode Switching
    • Frequency Modulation and PWM
    • Phase Shift Modulation and PWM
  • High Efficiency and Light Load Management
    • Burst Mode and Ideal Diode Emulation
    • Synchronous Rectifier Soft On/Off
    • Low IC Standby Power
  • Primary Side Voltage Sensing
  • Current Share (Average and Master/Slave)
  • Feature Rich Fault Protection Options
    • 7 Analog / 4 Digital Comparators,
    • Cycle-by-Cycle Current Limiting
    • Programmable Blanking Time and Fault Counting
    • External Fault Inputs
  • Synchronization of DPWM Waveforms Between Multiple UCD3138x Devices
  • 15 channel, 12 bit, 539 ksps General Purpose ADC
  • Internal Temperature Sensor
  • Fully ProgrammableHigh-Performance 31.25 MHz, 32-bit ARM7TDMI-S Processor
    • 128 kB Program Flash (4-32 kB Banks)
    • 2 kB Data Flash with ECC
    • 8 kB Data RAM
    • 8 kB Boot ROM Enables Firmware Boot-Load\
  • Communication Peripherals,
    • 2 - I2C/PMBus interfaces
    • 2 - UARTs, 1 - SPI
  • UART Auto Baud Rate Adjustment
  • Timer Capture with Selectable Input Pins
  • 80-pin QFP Package
  • Operating Temperature: –40°C to 125°C
  • Debug Interface
    • Code Composer Studio with JTAG Interface
    • Fusion Digital Power Designer GUI Support

The UCD3138xA is a digital power supply controller from Texas Instruments offering superior levels of integration and performance in a single chip solution. The UCD3138128A offers 128 kB of program flash memory in comparison to 32 kB in UCD3138A. and it also provides additional options for communication such as SPI and a second I2C/PMBus port. The availability of of program Flash memory in multiple 32 kB banks enables designers to implement dual images of firmware (that is, one main image + one back-up image) in the device and provides the option to execute from either of the banks using appropriate algorithms. It also creates the unique opportunity for the processor to load a new program and subsequently execute that program without interrupting power delivery. This feature allows the end user to add new features to the power supply in the field while eliminating any down-time required to load the new program.

The flexible nature of the UCD3138xA family makes it suitable for a wide variety of power conversion applications. In addition, multiple peripherals inside the device have been specifically optimized to enhance the performance of AC/DC and isolated DC/DC applications and reduce the solution component count in the IT and network infrastructure space. The UCD3138xA family is a fully programmable solution offering customers complete control of their application, along with ample flexibility for many solutions. At the same time, TI is committed to simplifying our customer’s development effort through offering best in class development tools, including application firmware, Code Composer StudioTM software development environment, and TI’s Fusion Power Development GUI which enables customers to configure and monitor key system parameters.

At the core of the controller are the Digital Power Peripherals (DPP). Each DPP implements a high speed digital control loop consisting of a dedicated Error Analog to Digital Converter (EADC), a PID based 2 pole - 2 zero digital compensator and DPWM outputs with 250 ps pulse width resolution. The device also contains a 12-bit, 539 ksps general purpose ADC with up to 15 channels, timers, interrupt control, PMBus, I2C, SPI and UART communications ports. The device is based on a 32-bit ARM7TDMI-S RISC microcontroller that performs real-time monitoring, configures peripherals and manages communications. The ARM microcontroller executes its program out of programmable flash memory as well as on chip RAM and ROM.

In addition to the DPP, specific power management peripherals have been added to enable high efficiency across the entire operating range, high integration for increased power density, reliability, and lowest overall system cost and high flexibility with support for the widest number of control schemes and topologies. Such peripherals include: light load burst mode, synchronous rectification, LLC and phase shifted full bridge mode switching, input voltage feed forward, copper trace current sense, ideal diode emulation, constant current constant power control, synchronous rectification soft on and off, peak current mode control, flux balancing, secondary side input voltage sensing, high resolution current sharing, hardware configurable soft start with pre bias, as well as several other features. Topology support has been optimized for voltage mode and peak current mode controlled phase shifted full bridge, single and dual phase PFC, bridgeless PFC, hard switched full bridge and half bridge, active clamp forward converter, two switch forward converter and LLC half bridge and full bridge.

The UCD3138128A is a functional variant of the UCD3138 Digital Power Controller that includes significant improvements over the UCD3138. For a description of the complete changes made in the UCD3138128A, refer to UCD3138128A Migration Guide. The major improvements are: The General Purpose ADC has been improved for better accuracy and performance at extreme cold temperatures (–40°C). The UART peripheral has been modified to include a hardware based auto-baud rate adjustment feature. A new Synchronous Rectifier Dead Time Optimization hardware peripheral has been added. Benefits include: Improved efficiency Reduced synchronous rectifier voltage stressesShorter development cycleA Duty Cycle Read Function has been added to improve use in peak current mode.

The UCD3138xA is a digital power supply controller from Texas Instruments offering superior levels of integration and performance in a single chip solution. The UCD3138128A offers 128 kB of program flash memory in comparison to 32 kB in UCD3138A. and it also provides additional options for communication such as SPI and a second I2C/PMBus port. The availability of of program Flash memory in multiple 32 kB banks enables designers to implement dual images of firmware (that is, one main image + one back-up image) in the device and provides the option to execute from either of the banks using appropriate algorithms. It also creates the unique opportunity for the processor to load a new program and subsequently execute that program without interrupting power delivery. This feature allows the end user to add new features to the power supply in the field while eliminating any down-time required to load the new program.

The flexible nature of the UCD3138xA family makes it suitable for a wide variety of power conversion applications. In addition, multiple peripherals inside the device have been specifically optimized to enhance the performance of AC/DC and isolated DC/DC applications and reduce the solution component count in the IT and network infrastructure space. The UCD3138xA family is a fully programmable solution offering customers complete control of their application, along with ample flexibility for many solutions. At the same time, TI is committed to simplifying our customer’s development effort through offering best in class development tools, including application firmware, Code Composer StudioTM software development environment, and TI’s Fusion Power Development GUI which enables customers to configure and monitor key system parameters.

At the core of the controller are the Digital Power Peripherals (DPP). Each DPP implements a high speed digital control loop consisting of a dedicated Error Analog to Digital Converter (EADC), a PID based 2 pole - 2 zero digital compensator and DPWM outputs with 250 ps pulse width resolution. The device also contains a 12-bit, 539 ksps general purpose ADC with up to 15 channels, timers, interrupt control, PMBus, I2C, SPI and UART communications ports. The device is based on a 32-bit ARM7TDMI-S RISC microcontroller that performs real-time monitoring, configures peripherals and manages communications. The ARM microcontroller executes its program out of programmable flash memory as well as on chip RAM and ROM.

In addition to the DPP, specific power management peripherals have been added to enable high efficiency across the entire operating range, high integration for increased power density, reliability, and lowest overall system cost and high flexibility with support for the widest number of control schemes and topologies. Such peripherals include: light load burst mode, synchronous rectification, LLC and phase shifted full bridge mode switching, input voltage feed forward, copper trace current sense, ideal diode emulation, constant current constant power control, synchronous rectification soft on and off, peak current mode control, flux balancing, secondary side input voltage sensing, high resolution current sharing, hardware configurable soft start with pre bias, as well as several other features. Topology support has been optimized for voltage mode and peak current mode controlled phase shifted full bridge, single and dual phase PFC, bridgeless PFC, hard switched full bridge and half bridge, active clamp forward converter, two switch forward converter and LLC half bridge and full bridge.

The UCD3138128A is a functional variant of the UCD3138 Digital Power Controller that includes significant improvements over the UCD3138. For a description of the complete changes made in the UCD3138128A, refer to UCD3138128A Migration Guide. The major improvements are: The General Purpose ADC has been improved for better accuracy and performance at extreme cold temperatures (–40°C). The UART peripheral has been modified to include a hardware based auto-baud rate adjustment feature. A new Synchronous Rectifier Dead Time Optimization hardware peripheral has been added. Benefits include: Improved efficiency Reduced synchronous rectifier voltage stressesShorter development cycleA Duty Cycle Read Function has been added to improve use in peak current mode.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
7 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCD3138128A Highly-Integrated Digital Controller For Isolated Power データシート (Rev. A) PDF | HTML 2017年 1月 19日
アプリケーション・ノート Introduction to UCD3138x Devices PDF | HTML 2023年 12月 21日
アプリケーション・ノート Stack Overflow Detection on UCD3138 Devices PDF | HTML 2023年 9月 13日
アプリケーション・ノート Lockup Avoidance for UCD3138 Devices PDF | HTML 2023年 7月 3日
アプリケーション・ノート Fusion Digital Power Studio for UCD3138 Isolated Power Applications (Rev. C) 2019年 6月 24日
アプリケーション・ノート UCD3138 Family - Practical Design Guideline (Rev. B) 2018年 11月 20日
ユーザー・ガイド UCD3138128A Migration Guide 2017年 9月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCD3138A64OEVM-662 — UCD3138 80 ピン、開ループ デジタル電源コントローラの評価基板

UCD3138A64 は、絶縁型電源アプリケーション向けに最適化済みのデジタル コントローラです。UCD3138A64OEVM-662 評価基板 (EVM) は、この製品をスタンドアロンで評価する場合の使いやすいテスト プラットフォームを提供します。1 個の 80 ピン ソケットと一連の包括的なテスト ポイントを実装したこの評価基板 (EVM) を使用すると、ハードウェアとファームウェアのエンジニアは、デバイスのさまざまなピン上の信号を個別に操作し、開ループ動作を検討することができます。また、この評価基板 (EVM) には、シンプルな閉ループ制御構成を実現するフレキシビリティもあります (...)

ユーザー ガイド: PDF
評価ボード

UCD3138HSFBEVM-029 — UCD3138 ハード スイッチング フル ブリッジ コンバータの評価基板

TI (テキサス・インスツルメンツ) の UCD3138HSFBEVM-029 評価基板 (EVM) は、プログラマブル デジタル電源コントローラである UCD3138RHA をベースとする、デジタル制御のハード スイッチング フルブリッジ コンバータです。この評価基板 (EVM) は、48V 入力システム向けの設計を採用した、スタンドアロンの対称型ハード スイッチング フルブリッジ (HSFB) DC/DC パワー コンバータです。UCD3138HSFBEVM-029 は、36Vdc ~ 72Vdc の DC 入力で動作し、公称 12Vdc の出力電圧で、360W の全負荷出力電力、つまり (...)

ユーザー ガイド: PDF
評価ボード

UCD3138PFCEVM-026 — UCD3138 プログラマブル・デジタル・パワー・コントローラ評価モジュール

The Texas Instruments UCD3138PFCEVM-026 evaluation module (EVM) is a digitally controlled single phase PFC pre-regulator based on the UCD3138 programmable digital power controller. The EVM accepts universal ac line input from 90Vac to 264Vac, 47Hz to 63Hz. The nominal output voltage is 390VDC. (...)

ユーザー ガイド: PDF
評価ボード

UCD3138PSFBEVM-027 — UCD3138PSFBEVM-027 評価モジュール

This EVM, UCD3138PSFBEVM-027 is to help evaluate the UCD3138 64-pin digital control IC in an off-line power converter application and then to aid in its design. The EVM is a standalone phase-shifted full-bridge DC-DC power converter. The EVM is used together with its control card, (...)
ユーザー ガイド: PDF
ドーター・カード

UCD3138A64CEVM-660 — UCD3138A64 制御カード評価モジュール

The Texas Instruments UCD3138A64CEVM-660 evaluation module (EVM) functions as a control card for UCD3138A64 digital controller for isolated power applications from Texas Instruments. The EVM can be used either as a stand-alone board to study the UCD3138A64 device or as a control card for (...)

ユーザー ガイド: PDF
デバッグ・プローブ

TMDSEMU110-U — XDS110 JTAG デバッグ・プローブ

TI (テキサス・インスツルメンツ) の XDS110 は、TI の各種組込みプロセッサを意図した、新しいクラスのデバッグ・プローブ (エミュレータ) です。XDS110 は XDS100 ファミリを置き換える製品であり、同時に、単一製品で幅広い規格 (IEEE1149.1、IEEE1149.7、SWD) をサポートしています。すべての XDS デバッグ・プローブはまた、組込みトレース・バッファ (ETB) を搭載しているすべての Arm プロセッサと DSP プロセッサで、コア・トレースとシステム・トレースをサポートしています。ピン経由でコア・トレースを実行する場合、XDS560v2 (...)

ユーザー ガイド: PDF
デバッグ・プローブ

TMDSEMU560V2STM-U — XDS560™ ソフトウェア v2 システム・トレース USB デバッグ・プローブ

XDS560v2 は、XDS560™ ファミリのデバッグ・プローブの中で最高の性能を達成し、従来の JTAG 規格 (IEEE1149.1) と cJTAG (IEEE1149.7) の両方をサポートしています。シリアル・ワイヤ・デバッグ (SWD) をサポートしていないことに注意してください。

すべての XDS デバッグ・プローブは、組み込みトレース・バッファ (ETB) を搭載しているすべての ARM プロセッサと DSP プロセッサで、コア・トレースとシステム・トレースをサポートしています。ピン経由でコア・トレースを実行する場合、XDS560v2 PRO TRACE が必要です。

(...)

デバッグ・プローブ

TMDSEMU560V2STM-UE — Spectrum Digital XDS560v2 システム・トレース USB およびイーサネット

The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

アプリケーション・ソフトウェアとフレームワーク

UCD3138_FW_SDK — UCD3138 アプリケーション開発ファームウェア・キット

The UCD3138 firmware is a free software development kit for Texas Instruments’ UCD3138 integrated digital power controller family. It encompasses firmware development tools along with supporting collateral for the most popular power supply topologies for quicker evaluation and development of (...)
サンプル・コードまたはデモ

UCD-TRAINING-LABS UCD Training Labs

UCD3138 integrated digital power controller training labs provides quick start learning tool for getting acquainted with digital controller. UCD3138 integrated digital controller offers advanced Power Peripherals operating autonomous from the processor. Device includes advanced Protection features, (...)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION-DIGITAL-POWER-STUDIO Fusion Digital Power Studio
ファームウェア

UCD3138FW-FBLLC — フル・ブリッジ/位相シフト LLC ファームウェア、TIDA-00381 の UCD3138 用

UCD3138 Phase Shift  LLC quickly gets a designer through evaluation to production in power supply designs based on a resonant LLC topology by providing firmware with ZVS operation and mode switching capability to achieve high efficiency across wider operating conditions.

The resonant LLC topology (...)

ファームウェア

UCD3138FW-HSFB HSFB Firmware

UCD3138 Hard Switched Full Bridge (HSFB) topology firmware gets a designer through evaluation to production in power supply designs based on high power Hard Switched Full Bridge topology by providing all-inclusive firmware with input voltage feed forward, copper trace current sensing, on the fly (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138HSFBEVM-029 UCD3138 ハード スイッチング フル ブリッジ コンバータの評価基板
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION-DIGITAL-POWER-STUDIO Fusion Digital Power Studio
ファームウェア

UCD3138FW-PFC PFC Firmware

UCD3138 Power Factor Correction (PFC) firmware gets a designer through evaluation to production in power supply designs based on a PFC topology by providing all-inclusive firmware that can integrate easily with your housekeeping functionality.

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138PFCEVM-026 UCD3138 プログラマブル・デジタル・パワー・コントローラ評価モジュール
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
ファームウェア

UCD3138FW-PSFB Phase Shifted Full Bridge Firmware

UCD3138 Phase Shift Full Bridge quickly gets a designer through evaluation to production in power supply designs based on high power PSFB topology by providing all-inclusive firmware with peak current mode control support, adaptive dead time optimization and programmable slope compensation.

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138PSFBEVM-027 UCD3138PSFBEVM-027 評価モジュール
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
ファームウェア

UCD3138FW_LLC LLC Half bridge Firmware

UCD3138 Resonant LLC Programmer quickly gets a designer through evaluation to production in power supply designs based on a resonant LLC topology by providing  firmware with ZCS protection and mode switching capability to achieve high efficiency across wider operating conditions. The sunflower (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138ALLCEVM150 UCD3138A LLC 評価モジュール
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
IDE (統合開発環境)、コンパイラ、またはデバッガ

CCSTUDIO Code Composer Studio 統合開発環境(IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications.  Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

こちらの設計リソースは、このカテゴリに属する製品の大半をサポートしています。

サポート状況を確認するには、製品の詳細ページをご覧ください。

開始 ダウンロードオプション
IDE (統合開発環境)、コンパイラ、またはデバッガ

FUSION_DIGITAL_POWER_API TI Fusion API

The Fusion Digital Power Studio is built on top of a Microsoft.NET Application Programming Interface (Fusion-API) that handles I2C/SMBus communication and abstracts devices and commands. It provides high level interfaces to common tasks such as command read/write, full device configuration (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
ドライバまたはライブラリ
FUSION_DIGITAL_POWER_API Fusion Digital Power - API
サポート・ソフトウェア

FUSION-DIGITAL-POWER-STUDIO Fusion Digital Power Studio 3.0.77

Fusion Digital PowerTM Studio incorporates software tools for Texas Instruments' UCD3138 Integrated Digital Controller family.   Fusion Digital Power helps power supply engineers to gain benefits of digital power without learning complex programming skills. Fusion Digital Power is an intuitive (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3020 完全プログラマブルなデジタル電源コントローラ、最大 2x 安定化出力および 6x DPWM 出力付 UCD3028 プログラマブルなデジタル・パワー・コントローラ、最大 2 つの安定化出力および 8 つの DPWM 出力付き UCD3040 プログラマブルなデジタル電源コントローラ、4x フィードバック・ループおよび 8x DPWM 出力付 UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
サポート・ソフトウェア

FUSION-PRODUCTION-GUI Fusion Digital Power Production Tool

The Fusion Digital Power Production Tool (production GUI) is a graphical user interface used to download firmware, upgrade firmware, configure, calibrate and test.  This command-based interface allows the seamless integration of UCD flashing procedures in a production environment.

The production GUI (...)
lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3020 完全プログラマブルなデジタル電源コントローラ、最大 2x 安定化出力および 6x DPWM 出力付 UCD3028 プログラマブルなデジタル・パワー・コントローラ、最大 2 つの安定化出力および 8 つの DPWM 出力付き UCD3040 プログラマブルなデジタル電源コントローラ、4x フィードバック・ループおよび 8x DPWM 出力付 UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
シミュレーション・モデル

UCD3138128A IBIS Model

SLUM628.ZIP (10 KB) - IBIS Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-00653 — バッテリ充電アプリケーション向け非絶縁型双方向コンバータのリファレンス・デザイン

TIDA-00653 is a non-isolated 48 to 12-V bi-directional converter reference design for 48V battery applications enabled by the UCD3138 digital power controller. The design has the flexibility to work in either a ZVS transition-mode topology to optimize light-load efficiency, or a hard-switching (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
TQFP (PFC) 80 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ