ホーム パワー・マネージメント シーケンサ

UCD90124A

アクティブ

12 レール・シーケンサおよびシステム・ヘルス・モニタ、ファン制御および ACPI サポート付き

製品詳細

Supply voltage (min) (V) 3 Number of supplies monitored 12 Supply voltage (max) (V) 3.6 Iq (typ) (mA) 50 Number of sequenced outputs 12 Rating Catalog Operating temperature range (°C) -40 to 125
Supply voltage (min) (V) 3 Number of supplies monitored 12 Supply voltage (max) (V) 3.6 Iq (typ) (mA) 50 Number of sequenced outputs 12 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN (RGC) 64 81 mm² 9 x 9
  • Monitor and sequence 12 voltage rails
    • All rails sampled every 400 µs
    • 12-bit ADC with 2.5-V, 0.5% internal VREF
    • Sequence based on time, rail and pin dependencies
    • Four programmable undervoltage and overvoltage thresholds per monitor
  • Nonvolatile error and peak-value logging per monitor (up to 12 fault detail entries)
  • Closed-loop margining for 10 Rails
    • Margin output adjusts rail voltage to match user-defined margin thresholds
  • Programmable watchdog timer and system reset
  • Flexible digital I/O configuration
  • Pin-selected rail states
  • Multiphase PWM clock generator
    • Clock frequencies from 15.259 kHz to
      125 MHz
    • Capability to configure independent clock outputs for synchronizing switch-mode power supplies
  • JTAG and I2C/SMBus/PMBus™ interfaces
  • Fan control and monitoring system functions.
    • Supports four fans with five user-defined speed-vs-temperature setpoints
    • Supports two-, three-, and four-wire fans
  • Monitor and sequence 12 voltage rails
    • All rails sampled every 400 µs
    • 12-bit ADC with 2.5-V, 0.5% internal VREF
    • Sequence based on time, rail and pin dependencies
    • Four programmable undervoltage and overvoltage thresholds per monitor
  • Nonvolatile error and peak-value logging per monitor (up to 12 fault detail entries)
  • Closed-loop margining for 10 Rails
    • Margin output adjusts rail voltage to match user-defined margin thresholds
  • Programmable watchdog timer and system reset
  • Flexible digital I/O configuration
  • Pin-selected rail states
  • Multiphase PWM clock generator
    • Clock frequencies from 15.259 kHz to
      125 MHz
    • Capability to configure independent clock outputs for synchronizing switch-mode power supplies
  • JTAG and I2C/SMBus/PMBus™ interfaces
  • Fan control and monitoring system functions.
    • Supports four fans with five user-defined speed-vs-temperature setpoints
    • Supports two-, three-, and four-wire fans

The UCD90124A is a 12-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 12 power-supply voltage inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90124A offers support for fan control, margining, and general-purpose PWM functions.

Specific power states can be achieved using the Pin-Selected Rail States feature. This feature allows with the use of up to 3 GPIs to enable and disable any rail. This is useful for implementing system low-power modes and the Advanced Configuration and Power Interface (ACPI) specification that is used for hardware devices.

The TI Fusion Digital Power™ designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.

The UCD90124A is a 12-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 12 power-supply voltage inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90124A offers support for fan control, margining, and general-purpose PWM functions.

Specific power states can be achieved using the Pin-Selected Rail States feature. This feature allows with the use of up to 3 GPIs to enable and disable any rail. This is useful for implementing system low-power modes and the Advanced Configuration and Power Interface (ACPI) specification that is used for hardware devices.

The TI Fusion Digital Power™ designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.

ダウンロード 字幕付きのビデオを表示 ビデオ

最新の UCD90xxx PMBus™ コマンド リファレンスは、https://www.ti.com/lit/ug/slvu352g/slvu352g.pdf で入手可能

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート ファン制御 / ACPI サポート搭載 12 レール・シーケンサ / システム・ヘルス・モニタ データシート (Rev. A) 2012年 5月 10日
アプリケーション・ノート How to Access UCD90XXX Sequencers GPIO PDF | HTML 2022年 6月 16日
アプリケーション・ノート How to Decode UCD90xxx Fault Log With PMBus (Rev. A) 2019年 11月 7日
アプリケーション・ノート Design Voltage Margining Circuit for UCD90xxx Power Sequencer and System Manager (Rev. A) 2019年 5月 21日
アプリケーション・ノート UCD90xxx Family Frequently Asked Questions and Answers (Rev. B) 2019年 4月 12日
ユーザー・ガイド UCD90xxx Sequencer and System Health Controller PMBus™ Command Reference (Rev. G) 2019年 4月 3日
ユーザー・ガイド UCD90xxx Sequencer Schematics Guidelines (Rev. C) PDF | HTML 2019年 3月 24日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート How to Cascade Multiple UCD90xxx Sequencers 2017年 8月 10日
ユーザー・ガイド Fusion Digital Power Designer GUI 7.0 for the UCD90xxx Sequencer 2017年 5月 31日
アプリケーション・ノート Monitoring Voltage, Current and Temperature Using the UCD9012x 2012年 3月 23日
ユーザー・ガイド UCD90SEQ64EVM-650: 64-Pin Sequencer Development Board 2010年 12月 27日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCD90SEQ64EVM-650 — 評価モジュール、UCD90xxx 用、64 ピン、シーケンサおよびシステム・ヘルス・モニタ

The UCD90SEQ64EVM-650 is a fully assembled and tested circuit for evaluating the 64-pin Sequencer and System Health Controller, including the UCD90120, UCD90124, UCD90120A, UCD90124A, UCD90910 and UCD90160.

ユーザー ガイド: PDF
アプリケーション・ソフトウェアとフレームワーク

FUSION_DIGITAL_POWER_DESIGNER — デジタル電源用ソフトウェア

Fusion Digital Power™ は、TI のデジタル電源コントローラとシーケンサ / ヘルス・モニタの構成および監視を行うためのグラフィカル・ユーザー・インターフェイス (GUI) ソフトウェアです。アプリケーションは PMBus プロトコルを使用し、TI の USB アダプタとシリアル・バス経由でデバイスとの通信を行います。
アプリケーション・ソフトウェアとフレームワーク

FUSION_MFR_GUI — Fusion Digital Power 作成ツール

The Fusion Digital Power Manufacturing Tool (aka MFR GUI) is a Graphical User Interface used to download firmware, upgrade firmware, configure, calibrate and test .

The MFR GUI supports the same devices as Fusion Digital Power Designer software.  This tool is typically used in manufacturing (...)

シミュレーション・モデル

UCD90124A BSDL

SLVC156.ZIP (2 KB) - BSDL Model
計算ツール

SLVC676 UCD90xxx Voltage Margining Circuit Design Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
シーケンサ
UCD90120 12 チャネル・シーケンサおよびシステム・ヘルス・モニタ UCD90120A 12 レール電源シーケンス ICおよびモニタ、ACPI サポート付き UCD90124 12 レール・シーケンサおよびシステム・ヘルス・コントローラ、ファン制御付 UCD90124A 12 レール・シーケンサおよびシステム・ヘルス・モニタ、ファン制御および ACPI サポート付き UCD90160 16 レール電源シーケンス IC、ACPI サポート付き UCD90160A ACPI をサポートする 16 レール PMBus 電源シーケンス IC / システム・マネージャ UCD90240 24 レール PMBus 電源シーケンス ICとパワー・マネージャ UCD90320 32 レール PMBus 電源シーケンス ICとシステム・マネージャ UCD9090 10 チャネル・シーケンサおよびシステム・ヘルス・モニタ UCD9090A 10レール電源シーケンスICおよびモニタ、ACPI対応
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
VQFN (RGC) 64 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ