製品詳細

Device type Current sensing Peak-to-peak input voltage range (V) 0.25 Isolation rating Basic Withstand isolation voltage (VISO) (Vrms) 4250 Working isolation voltage (VIOWM) (Vrms) 800 Transient isolation voltage (VIOTM) (VPK) 4250 CMTI (min) (kV/µs) 10 Creepage (min) (mm) 8.5 Clearance (min) (mm) 8.5 Input offset (±) (max) (V) 0.0015 Input offset drift (±) (typ) (V/°C) 0.0000015 Rating Catalog Operating temperature range (°C) -40 to 105
Device type Current sensing Peak-to-peak input voltage range (V) 0.25 Isolation rating Basic Withstand isolation voltage (VISO) (Vrms) 4250 Working isolation voltage (VIOWM) (Vrms) 800 Transient isolation voltage (VIOTM) (VPK) 4250 CMTI (min) (kV/µs) 10 Creepage (min) (mm) 8.5 Clearance (min) (mm) 8.5 Input offset (±) (max) (V) 0.0015 Input offset drift (±) (typ) (V/°C) 0.0000015 Rating Catalog Operating temperature range (°C) -40 to 105
SOIC (DWV) 8 67.275 mm² 5.85 x 11.5 SOP (DUB) 8 98.8 mm² 9.5 x 10.4
  • ±250-mV Input Voltage Range Optimized for
    Shunt Resistors
  • Very Low Nonlinearity: 0.075% Maximum at 5 V
  • Low Offset Error: 1.5 mV Maximum
  • Low Noise: 3.1 mVRMS Typical
  • Low High-Side Supply Current:
    8 mA Maximum at 5 V
  • Input Bandwidth: 60 kHz Minimum
  • Fixed Gain: 8 (0.5% accuracy)
  • High Common Mode Rejection Ratio: 108 dB
  • 3.3-V Operation on Low-Side
  • Certified Galvanic Isolation:
    • UL1577 and VDE V 0884-10 Approved
    • Isolation Voltage: 4250 VPEAK (AMC1200B)
    • Working Voltage: 1200 VPEAK
    • Transient Immunity: 10 kV/µs Minimum
  • Typical 10-Year Lifespan at Rated Working
    Voltage (see Application Report SLLA197)
  • Fully Specified Over the Extended Industrial
    Temperature Range
  • ±250-mV Input Voltage Range Optimized for
    Shunt Resistors
  • Very Low Nonlinearity: 0.075% Maximum at 5 V
  • Low Offset Error: 1.5 mV Maximum
  • Low Noise: 3.1 mVRMS Typical
  • Low High-Side Supply Current:
    8 mA Maximum at 5 V
  • Input Bandwidth: 60 kHz Minimum
  • Fixed Gain: 8 (0.5% accuracy)
  • High Common Mode Rejection Ratio: 108 dB
  • 3.3-V Operation on Low-Side
  • Certified Galvanic Isolation:
    • UL1577 and VDE V 0884-10 Approved
    • Isolation Voltage: 4250 VPEAK (AMC1200B)
    • Working Voltage: 1200 VPEAK
    • Transient Immunity: 10 kV/µs Minimum
  • Typical 10-Year Lifespan at Rated Working
    Voltage (see Application Report SLLA197)
  • Fully Specified Over the Extended Industrial
    Temperature Range

The AMC1200 and AMC1200B are precision isolation amplifiers with an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. This barrier has been certified to provide galvanic isolation of up to 4250 VPEAK (AMC1200B) or 4000 VPEAK (AMC1200) according to UL1577 and VDE V 0884-10. Used in conjunction with isolated power supplies, these devices prevent noise currents on a high common mode voltage line from entering the local ground and interfering with or damaging sensitive circuitry.

The input of the AMC1200 or AMC1200B is optimized for direct connection to shunt resistors or other low voltage level signal sources. The excellent performance of the device supports accurate current control resulting in system-level power saving and, especially in motor-control applications, lower torque ripple. The common mode voltage of the output signal is automatically adjusted to either the 3-V or 5-V low-side supply.

The AMC1200 and AMC1200B are fully specified over the extended industrial temperature range of –40°C to 105°C and are available in a wide-body SOIC-8 package (DWV) and a gullwing-8 package (DUB).

The AMC1200 and AMC1200B are precision isolation amplifiers with an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. This barrier has been certified to provide galvanic isolation of up to 4250 VPEAK (AMC1200B) or 4000 VPEAK (AMC1200) according to UL1577 and VDE V 0884-10. Used in conjunction with isolated power supplies, these devices prevent noise currents on a high common mode voltage line from entering the local ground and interfering with or damaging sensitive circuitry.

The input of the AMC1200 or AMC1200B is optimized for direct connection to shunt resistors or other low voltage level signal sources. The excellent performance of the device supports accurate current control resulting in system-level power saving and, especially in motor-control applications, lower torque ripple. The common mode voltage of the output signal is automatically adjusted to either the 3-V or 5-V low-side supply.

The AMC1200 and AMC1200B are fully specified over the extended industrial temperature range of –40°C to 105°C and are available in a wide-body SOIC-8 package (DWV) and a gullwing-8 package (DUB).

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
AMC1300 アクティブ ±250mV 入力、高精度、電流センシング、強化絶縁型アンプ Increased isolation ratings (reinforced isolation)

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
13 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート AMC1200/B Fully-Differential Isolation Amplifier データシート (Rev. D) PDF | HTML 2015年 6月 10日
証明書 VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. W) 2024年 1月 31日
アプリケーション概要 Interfacing a Differential-Output (Isolated) Amp to a Single-Ended Input ADC (Rev. B) PDF | HTML 2023年 6月 2日
アプリケーション概要 Shunt Resistor Selection for Isolated Data Converters PDF | HTML 2023年 5月 4日
ホワイト・ペーパー Best in Class Radiated Emissions EMI Performance with Isolated Amplifiers (Rev. A) PDF | HTML 2023年 3月 15日
証明書 UL Certificate of Compliance File E181974 Vol 4 Sec 1 (Rev. A) 2022年 8月 5日
e-Book(PDF) 電流センス・アンプで 電流センシング設計時の 問題を解決 (Rev. A 翻訳版) 2020年 1月 9日
ホワイト・ペーパー Comparing isolated amplifiers and isolated modulators (Rev. A) 2019年 2月 28日
技術記事 Voltage and current sensing in HEV/EV applications PDF | HTML 2017年 11月 22日
設計ガイド Shunt Based 200A Peak Current Measurement Using Isolation Amplifier Design Guide (Rev. A) 2016年 3月 5日
証明書 CSA Certification (Certificate: 220991) (Rev. A) 2015年 10月 23日
EVM ユーザー ガイド (英語) AMC1200EVM User Guide (Rev. A) 2013年 7月 30日
ユーザー・ガイド 0-5 A, Single-Supply, 2 kV Isolated Current Sensing Solution 2013年 6月 18日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

AMC1200EVM — AMC1200 電流センス向け、±250mV 入力、基本絶縁型アンプの評価基板

The AMC1200 is an isolated single-channel analog amplifier an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. The AMC1200 is used in high-resolution measurement applications including current monitoring, industrial (...)

ユーザー ガイド: PDF
シミュレーション・モデル

AMC1200 PSpice Model

SBAM289.ZIP (4 KB) - PSpice Model
シミュレーション・モデル

AMC1200 TINA-TI Reference Design

SBAM098.ZIP (24 KB) - TINA-TI Reference Design
シミュレーション・モデル

AMC1200 TINA-TI Spice Model

SBAM097.ZIP (11 KB) - TINA-TI Spice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-010065 — 高効率、電磁波の小さい絶縁型 DC/DC コンバータをベースとするアナログ入力モジュールのリファレンス・デザイン

このリファレンス・デザインは、絶縁型アンプ用の絶縁型電源を生成し、絶縁された電圧と電流を測定するための簡単なアーキテクチャです。5V 入力および構成可能な 5V/5.4V 出力 (低ドロップアウト・レギュレータ (LDO) のためのヘッドルーム) で動作する完全統合型強化絶縁 DC/DC コンバータにより、絶縁された電力を生成します。入力範囲が ±50mV である複数の絶縁型アンプは、複数のチャネル絶縁入力という形で構成済みであり、これらのアンプに接続した複数のシャントを使用して電流を測定します。入力範囲が ±250mV または ±12V (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00195 — 絶縁 IGBT ゲート・ドライバ評価プラットフォーム、三相インバータ・システム用、リファレンス・デザイン

TIDA-00195 リファレンス・デザインは、22kW の出力段と、各種アプリケーションのモーター制御を意図した TI の新しい強化絶縁型 IGBT ゲート・ドライバである ISO5852S で構成されています。このデザインを使用すると、電流定格が 50A ~ 200A の範囲内にあり、電圧定格が 1200V の IGBT モジュールで構成された 3 相インバータ内にある ISO5852S の性能を評価することができます。

評価の対象として重要ないくつかの機能と性能は、DESAT を使用した短絡保護、ソフト・シャットダウン、インバータのさまざまな dv/dt (...)

設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00810 — デルタ・シグマ・チップ診断機能を使用して保護リレーの AC 電圧と電流を測定するリファレンス・デザイン

The TIDA-00810 reference design accurately measures analog inputs performance and includes chip diagnostics to help identify power  systems failures early by using a highly accuracy AC voltage and current measurement analog front end (AFE) and a four-channel, 24-bit simultaneously-sampling (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00834 — 計測範囲 ±10V の 16 ビット SAR ADC を使用する高精度アナログ・フロント・エンド のリファレンス・デザイン

TIDA-00834 は、±10V 対応、バイポーラ入力の同時サンプリング 16 ビット逐次比較型 ADC による電圧入力と電流入力の高精度測定のためのリファレンス・デザインです。電源システムの異常や、障害に関連する電力品質を高精度かつ迅速に識別します。また、電源システムのダウンタイムの低減も可能にします。AFE が搭載しているのは、高精度計測機器、または最大 125A の電流測定向け高精度アンプ・ベースのシグナル・コンディショニング機器と、最大 300V (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00835 — 24 ビット・デルタ・シグマ ADC を使用して ±0.5% の高精度電流測定と絶縁型電圧測定を行うリファレンス・デザイン

TIDA-00835 リファレンス・デザインにより、ダイナミック・レンジが広い 4 チャネル同時サンプリング差動入力 24 ビット・デルタ・シグマ ADC を使用して、バイポーラ入力構成で電圧と電流を高精度測定することができます。ADC は ±2.5V のバイポーラ入力測定向けに構成済みです。  これらの入力は固定ゲイン・アンプを使用して ±2.5V の ADC 測定範囲向けにスケーリングされています。この AFE は共通の外部クロックを使用して 2 個の ADC をチェーン接続し、入力チャネル数を 8 (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00445 — シャント・ベースの 200A ピーク電流測定、リファレンス・デザイン、絶縁アンプ使用

このリファレンス・デザインは、シャントと絶縁型アンプを使用して、絶縁型電流を測定します。このデザインは、シャント電圧を 25mV に制限する方法でシャント内部での消費電力を低減し、最大 200A に達する範囲の大電流を測定できます。絶縁型アンプの入力範囲に合わせる目的で、ゲインが 10 である計測アンプ・ベースの構成で高精度オペアンプを使用してシャント電圧をさらに増幅します。絶縁型アンプの出力をレベル・シフトし、3.3V ADC (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

PMP9480 — 絶縁バイアス電源 + 絶縁アンプのコンボ、ライン電圧または電流測定用

PMP9480 は、デュアル出力の Flybuck コンバータと絶縁型アンプを組み合わせたソリューションであり、ライン電圧やライン電流のセンスに使用できるほか、産業用システム全体に対する補助バイアス電力の供給も可能です。  このデザインでは 10 Vin ~ 72Vin DC という非常に広い入力電圧を受け入れ(12V/24V のような各種バッテリや 48V または利用可能な他の各種産業用 DC バスからの電力供給で動作)、5V@350mA(コントローラ、アンプ、インターフェイスなどに供給するプライマリ・バイアス電源)、および (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIPD121 — 活性電源側の絶縁型、電流シャント・モニタ

この precision リファレンス・デザインでは、絶縁型電流シャント・モニタの高温側に電力を供給するユーザー側ソリューションを実現できます。絶縁型電流センス・ソリューションを構築する最初のステップは、センサの 1 次側に電力を供給することです。このリファレンス・デザインでは、一般的な問題に対する低コストの「市販」ソリューションを実現するために必要なトランス、整流ダイオード、およびフィルタ部品を選択するためのステップを踏んでいきます。
ユーザー ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
SOIC (DWV) 8 オプションの表示
SOP (DUB) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ