ホーム パワー・マネージメント バッテリ管理 IC バッテリ残量計

単セル・リチウムイオン/リチウムポリマー・バッテリー残量計 IC

製品詳細

Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface HDQ Battery capacity (min) (mAh) 300 Battery capacity (max) (mAh) 6000 Implementation Pack External capacity indication None Operating temperature range (°C) -20 to 70 Rating Catalog
Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface HDQ Battery capacity (min) (mAh) 300 Battery capacity (max) (mAh) 6000 Implementation Pack External capacity indication None Operating temperature range (°C) -20 to 70 Rating Catalog
VSON (DRK) 10 12 mm² 4 x 3
  • HDQ (bq27000) or I2C (bq27200) Communication
  • Reports Accurate Time-to-Empty With Measured Load and Historical Maximum and Standby Loads
  • Reports Temperature, Voltage, and Current
  • High Accuracy Charge and Discharge Current Integration with Automatic Offset Calibration
  • Requires No User Calibration
  • Programmable Input/Output Port
  • Internal User EEPROM Configuration Memory
  • Automatic Capacity Reduction With Age
  • Stable Oscillator Without External Components
  • Dynamic End-of-Discharge Detection Delay to Allow Use in a High-Dynamic Load Environment
  • Automatic Sleep Mode When Communication Lines are Low
  • Available in a Small 3 mm x 4 mm QFN Package
  • Five Low-Power Operating Modes
    • Active: < 90 µA
    • Sleep: < 2.5 µA
    • Ship: < 2 µA (bq27000 only)
    • Hibernate: < 1.5 µA
    • Data Retention: < 20 nA
  • APPLICATIONS
    • PDA
    • Smart Phones
    • MP3 Players
    • Digital Cameras
    • Internet Appliances
    • Handheld Devices

bqJUNIOR is a trademark of Texas Instruments.

  • HDQ (bq27000) or I2C (bq27200) Communication
  • Reports Accurate Time-to-Empty With Measured Load and Historical Maximum and Standby Loads
  • Reports Temperature, Voltage, and Current
  • High Accuracy Charge and Discharge Current Integration with Automatic Offset Calibration
  • Requires No User Calibration
  • Programmable Input/Output Port
  • Internal User EEPROM Configuration Memory
  • Automatic Capacity Reduction With Age
  • Stable Oscillator Without External Components
  • Dynamic End-of-Discharge Detection Delay to Allow Use in a High-Dynamic Load Environment
  • Automatic Sleep Mode When Communication Lines are Low
  • Available in a Small 3 mm x 4 mm QFN Package
  • Five Low-Power Operating Modes
    • Active: < 90 µA
    • Sleep: < 2.5 µA
    • Ship: < 2 µA (bq27000 only)
    • Hibernate: < 1.5 µA
    • Data Retention: < 20 nA
  • APPLICATIONS
    • PDA
    • Smart Phones
    • MP3 Players
    • Digital Cameras
    • Internet Appliances
    • Handheld Devices

bqJUNIOR is a trademark of Texas Instruments.

The bqJUNIOR™ series are highly accurate stand-alone single-cell Li-Ion and Li-Pol battery capacity monitoring and reporting devices targeted at space-limited, portable applications. The IC monitors a voltage drop across a small current sense resistor connected in series with the battery to determine charge and discharge activity of the battery. Compensations for battery temperature, self-discharge, and discharge rate are applied to the capacity measurments to provide available time-to-empty information across a wide range of operating conditions. Battery capacity is automatically recalibrated, or learned, in the course of a discharge cycle from full to empty. Internal registers include current, capacity, time-to-empty, state-of-charge, cell temperature and voltage, status, and more.

The bqJUNIOR can operate directly from single-cell Li-Ion and Li-Pol batteries and communicates to the system over a HDQ one-wire or I2C serial interface.

The bqJUNIOR™ series are highly accurate stand-alone single-cell Li-Ion and Li-Pol battery capacity monitoring and reporting devices targeted at space-limited, portable applications. The IC monitors a voltage drop across a small current sense resistor connected in series with the battery to determine charge and discharge activity of the battery. Compensations for battery temperature, self-discharge, and discharge rate are applied to the capacity measurments to provide available time-to-empty information across a wide range of operating conditions. Battery capacity is automatically recalibrated, or learned, in the course of a discharge cycle from full to empty. Internal registers include current, capacity, time-to-empty, state-of-charge, cell temperature and voltage, status, and more.

The bqJUNIOR can operate directly from single-cell Li-Ion and Li-Pol batteries and communicates to the system over a HDQ one-wire or I2C serial interface.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
17 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Single-Cell Li-Ion and Li-Pol Battery Gas Gauge IC For Portable Applications データシート (Rev. D) 2006年 2月 27日
アプリケーション・ノート Battery Authentication and Security Schemes (Rev. A) 2014年 7月 17日
EVM ユーザー ガイド (英語) bq27000EVM Single Cell Battery Fuel Gauge Evaluation Module (Rev. B) 2013年 10月 4日
アプリケーション・ノート Feature Set Comparison of bq27x00, bq27x10, bq27500, and bq27510 (Rev. A) 2008年 12月 2日
アプリケーション・ノート HDQ Communication Basics (Rev. A) 2008年 9月 18日
アプリケーション・ノート ESD and RF Mitigation in Handheld Battery Pack Electronics 2008年 3月 6日
アプリケーション・ノート Single Cell Gas Gauge Circuit Design 2008年 2月 22日
アプリケーション・ノート Single Cell Impedance Track Printed-Circuit Board Layout 2008年 2月 22日
その他の技術資料 BQ27000_NanoEVM_ Schematic 2007年 2月 13日
その他の技術資料 TPS712xx_NanoEVM_OV 2007年 1月 29日
Analog Design Journal Complete battery-pack design for one- or two-cell portable applications 2006年 7月 17日
アプリケーション・ノート Multicell Li-Ion and Li-Pol Battery Gas-Gauge Application Using the bqJunior 2006年 5月 26日
アプリケーション・ノート Using the bq27x00 With a Primary Cell Battery 2005年 12月 15日
ユーザー・ガイド bq27x00 Single-Cell Battery Fuel Gauge Module Tester and Programmer 2005年 12月 2日
アプリケーション・ノート Choosing Between Battery Gas Gauges & Monitors to Track Charge Availabilility 2005年 9月 27日
アプリケーション・ノート Configuring the bq27000/200 for Gas Gauge Applications 2005年 8月 29日
アプリケーション・ノート Building a Superior Battery Monitor with the bq27x00 2005年 6月 20日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

サポート・ソフトウェア

SLUC261 Gas Gauge Chemistry Updater Setup v7.82

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
バッテリ残量計
BQ20Z40 SBS 準拠、バッテリー残量計、Impedance Track テクノロジー対応、BQ29330 併用 BQ20Z40-R1 Impedance Track™ テクノロジー採用、SBS 1.1 準拠、バッテリ残量計 BQ20Z70-V150 Impedance Track™ テクノロジー対応、SBS 1.1 準拠バッテリ残量計 BQ20Z70-V160 Impedance Track™ テクノロジー対応、bq29330 との使用時、SBS 1.1 準拠バッテリ残量計 BQ20Z80 Impedance Track™ テクノロジー対応、bq29312 との使用時、SBS 1.1 準拠バッテリ残量計 BQ20Z80-V102 Impedance Track™ テクノロジー対応、SBS 1.1 準拠バッテリ残量計 BQ20Z80-V110 Impedance Track™ テクノロジー対応、FW v1.10 搭載、SBS 1.1 準拠バッテリ残量計 BQ20Z80A-V110 Impedance Track™ テクノロジー対応、bq29312A との使用時、SBS 1.1 準拠バッテリ残量計 BQ27000 単セル・リチウムイオン/リチウムポリマー・バッテリー残量計 IC BQ27010 ポータブル・アプリケーション向け、HDQ 対応、リチウムイオンとリチウムポリマのバッテリ残量計 IC BQ27200 I2C インターフェイス搭載、シングル セル、リチウムイオン / リチウムポリマ向け、バッテリ残量計 IC BQ27210 ポータブル・アプリケーション向け、I2C 対応、リチウムイオンとリチウムポリマのバッテリ残量計 IC BQ27425-G1 バッテリ直接接続型、システム側 Impedance Track™ バッテリ残量計 | バッテリ残量計 BQ27505-J5 FW v2.29 搭載、システム側 Impedance Track™ バッテリ残量計
ソフトウェア
設計ツール
GASGAUGECHEM-SW バッテリ残量計のケミストリー更新ツール
シミュレーション・モデル

BQ27000 IBIS Model

SLUM102.ZIP (22 KB) - IBIS Model
パッケージ ピン数 ダウンロード
VSON (DRK) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ