ホーム パワー・マネージメント バッテリ管理 IC バッテリ・チャージャ IC

BQ51050B

アクティブ

Qi (WPC) 準拠、高集積、2 次側ダイレクト・リチウム・イオン・チャージャ。

製品詳細

Charge current (max) (A) 1.5 Vin (max) (V) 10 Cell chemistry Li-Ion/Li-Polymer Absolute max Vin (max) (V) 20 Vin (min) (V) 4 Rating Catalog Operating temperature range (°C) 0 to 125
Charge current (max) (A) 1.5 Vin (max) (V) 10 Cell chemistry Li-Ion/Li-Polymer Absolute max Vin (max) (V) 20 Vin (min) (V) 4 Rating Catalog Operating temperature range (°C) 0 to 125
DSBGA (YFP) 28 5.4 mm² 1.8 x 3 VQFN (RHL) 20 15.75 mm² 4.5 x 3.5
  • Single-Stage Wireless Power Receiver
    and Li-Ion/Li-Pol Battery Charger
    • Combines Wireless Power Receiver, Rectifier, and Battery Charger in a Single, Small Package
    • 4.20-V, 4.35-V, and 4.40-V Output Voltage Options
    • Supports a Charging Current up to 1.5 A
    • 93% Peak AC-DC Charging Efficiency
  • Robust Architecture
    • 20-V Maximum Input Voltage Tolerance,
      With Input Overvoltage Protection
    • Thermal Shutdown and Overcurrent Protection
    • Temperature Monitoring and Fault Detection
  • Compatible With WPC v1.2 Qi Industry Standard
  • Power Stage Output Tracks Rectifier and Battery Voltage to Ensure Maximum Efficiency Across the Full Charge Cycle
  • Available in Small DSGBA and VQFN Packages
  • Single-Stage Wireless Power Receiver
    and Li-Ion/Li-Pol Battery Charger
    • Combines Wireless Power Receiver, Rectifier, and Battery Charger in a Single, Small Package
    • 4.20-V, 4.35-V, and 4.40-V Output Voltage Options
    • Supports a Charging Current up to 1.5 A
    • 93% Peak AC-DC Charging Efficiency
  • Robust Architecture
    • 20-V Maximum Input Voltage Tolerance,
      With Input Overvoltage Protection
    • Thermal Shutdown and Overcurrent Protection
    • Temperature Monitoring and Fault Detection
  • Compatible With WPC v1.2 Qi Industry Standard
  • Power Stage Output Tracks Rectifier and Battery Voltage to Ensure Maximum Efficiency Across the Full Charge Cycle
  • Available in Small DSGBA and VQFN Packages

The bq5105x device is a high-efficiency, Qi-compliant wireless power receiver with an integrated Li-Ion/Li-Pol battery charge controller for portable applications. The bq5105xB devices provide efficient AC-DC power conversion, integrates the digital controller required to comply with Qi v1.2 communication protocol, and provides all necessary control algorithms needed for efficient and safe Li-Ion and Li-Pol battery charging. Together with the bq500212A transmitter-side controller, the bq5105x enables a complete wireless power transfer system for direct battery charger solutions. By using near-field inductive power transfer, the receiver coil embedded in the portable device can pick up the power transmitted by transmitter coil. The AC signal from the receiver coil is then rectified and conditioned to apply power directly to the battery.  Global feedback is established from the receiver to the transmitter to stabilize the power transfer process.  This feedback is established by using the Qi v1.2 communication protocol.

The bq5105xB devices integrate a low-impedance synchronous rectifier, low-dropout regulator (LDO), digital control, charger controller, and accurate voltage and current loops in a single package.  The entire power stage (rectifier and LDO) use low-resistance N-MOSFETs (100-mΩ typical Rdson) to ensure high efficiency and low power dissipation.

The bq5105x device is a high-efficiency, Qi-compliant wireless power receiver with an integrated Li-Ion/Li-Pol battery charge controller for portable applications. The bq5105xB devices provide efficient AC-DC power conversion, integrates the digital controller required to comply with Qi v1.2 communication protocol, and provides all necessary control algorithms needed for efficient and safe Li-Ion and Li-Pol battery charging. Together with the bq500212A transmitter-side controller, the bq5105x enables a complete wireless power transfer system for direct battery charger solutions. By using near-field inductive power transfer, the receiver coil embedded in the portable device can pick up the power transmitted by transmitter coil. The AC signal from the receiver coil is then rectified and conditioned to apply power directly to the battery.  Global feedback is established from the receiver to the transmitter to stabilize the power transfer process.  This feedback is established by using the Qi v1.2 communication protocol.

The bq5105xB devices integrate a low-impedance synchronous rectifier, low-dropout regulator (LDO), digital control, charger controller, and accurate voltage and current loops in a single package.  The entire power stage (rectifier and LDO) use low-resistance N-MOSFETs (100-mΩ typical Rdson) to ensure high efficiency and low power dissipation.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート bq5105xB High-Efficiency Qi v1.2-Compliant Wireless Power Receiver and Battery Charger データシート (Rev. F) PDF | HTML 2017年 6月 28日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版をダウンロード (Rev.R) 2018年 9月 13日
製品概要 Battery Management Solutions for Wearable and Fitness Devices (Rev. C) 2014年 8月 18日
アプリケーション・ノート Test and Troubleshoot a Wireless Power Receiver 2014年 8月 6日
ユーザー・ガイド bq51050BEVM-764, Integrated Wireless Power Li-Ion Charger Receiver (Rev. C) 2013年 6月 5日
製品概要 Power Bank Charger ICs 2013年 2月 25日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

計算ツール

SLUC577 Foreign Object Detection (FOD) Calibration/Tuning Tool

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
バッテリ・チャージャ IC
BQ51003 BQ51003 ワイヤレス・パワー・レシーバ BQ51010B 高集積ワイヤレス・レシーバ Qi (WPC V1.1) 準拠電源 BQ51013B WPC 1.1 互換、統合型、ワイヤレス・パワー・レシーバ IC BQ51020 5W (WPC) シングルチップ・ワイヤレス・パワー・レシーバ BQ51021 I2C 対応、5W (WPC) シングルチップ・ワイヤレス・パワー・レシーバ BQ51025 bq51025 10W WPC 準拠シングル・チップ・ワイヤレス・パワー・レシーバ BQ51050B Qi (WPC) 準拠、高集積、2 次側ダイレクト・リチウム・イオン・チャージャ。 BQ51051B Qi (WPC) 準拠、統合型ワイヤレス・パワー・リチウムイオン・チャージャ・レシーバ BQ51052B BQ51052B Qi (WPC) 準拠、高集積ワイヤレス・パワー・リチウムイオン・チャージャ・レシーバ BQ51221 デュアル・モード 5W (WPC と PMA) シングル・チップ・ワイヤレス・パワー・レシーバ BQ51222 デュアル・モード 5W (WPC v1.2 と PMA) シングル・チップ・ワイヤレス・パワー・レシーバ
計算ツール

SLUC629 BQ5105XB NTC Calculator Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
バッテリ・チャージャ IC
BQ51050B Qi (WPC) 準拠、高集積、2 次側ダイレクト・リチウム・イオン・チャージャ。 BQ51051B Qi (WPC) 準拠、統合型ワイヤレス・パワー・リチウムイオン・チャージャ・レシーバ BQ51052B BQ51052B Qi (WPC) 準拠、高集積ワイヤレス・パワー・リチウムイオン・チャージャ・レシーバ
リファレンス・デザイン

TIDA-00669 — 残量計搭載、500mA ワイヤレス・チャージャ・ブースタパックのリファレンス・デザイン

TIDA-00669 は、TI の LaunchPad™ (www.ti.com/launchpad) に電力を供給するワイヤレス・チャージャとバッテリ・マネージメント機能を実現するブースタパックを提示するリファレンス・デザインです。これは、低消費電力アプリケーションに最適な高集積パワー・マネージメントを提示するリファレンス・デザインです。主なエネルギー蓄積方法は、外付けのリチウムポリマ再充電可能バッテリです。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
DSBGA (YFP) 28 オプションの表示
VQFN (RHL) 20 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ