DRV8305

アクティブ

電流シャント・アンプと SPI 搭載、最大 45V の 3 相スマート・ゲート・ドライバ

製品詳細

Rating Catalog Architecture Gate driver Control interface 1xPWM, 3xPWM, 6xPWM Gate drive (A) 1 Vs (min) (V) 4.4 Vs ABS (max) (V) 45 Features Current sense Amplifier, LDO, SPI/I2C, Smart Gate Drive, Watchdog timer Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control interface 1xPWM, 3xPWM, 6xPWM Gate drive (A) 1 Vs (min) (V) 4.4 Vs ABS (max) (V) 45 Features Current sense Amplifier, LDO, SPI/I2C, Smart Gate Drive, Watchdog timer Operating temperature range (°C) -40 to 125
HTQFP (PHP) 48 81 mm² 9 x 9
  • 4.4-V to 45-V Operating Voltage
  • 1.25-A and 1-A Peak Gate Drive Currents
  • Programmable High- and Low-Side Slew-Rate Control
  • Charge-Pump Gate Driver for 100% Duty Cycle
  • Three Integrated Current-Shunt Amplifiers
  • Integrated 50-mA LDO (3.3-V and 5-V Option)
  • 3-PWM or 6-PWM Input Control up to 200 kHz
  • Single PWM-Mode Commutation Capability
  • Supports Both 3.3-V and 5-V Digital Interface
  • Serial Peripheral Interface (SPI) for Device Settings and Fault Reporting
  • Thermally-Enhanced 48-Pin HTQFP
  • Protection Features:
    • Fault Diagnostics and MCU Watchdog
    • Programmable Dead-Time Control
    • MOSFET Shoot-Through Prevention
    • MOSFET VDS Overcurrent Monitors
    • Gate-Driver Fault Detection
    • Reverse Battery-Protection Support
    • Limp Home-Mode Support
    • Overtemperature Warning and Shutdown
  • 4.4-V to 45-V Operating Voltage
  • 1.25-A and 1-A Peak Gate Drive Currents
  • Programmable High- and Low-Side Slew-Rate Control
  • Charge-Pump Gate Driver for 100% Duty Cycle
  • Three Integrated Current-Shunt Amplifiers
  • Integrated 50-mA LDO (3.3-V and 5-V Option)
  • 3-PWM or 6-PWM Input Control up to 200 kHz
  • Single PWM-Mode Commutation Capability
  • Supports Both 3.3-V and 5-V Digital Interface
  • Serial Peripheral Interface (SPI) for Device Settings and Fault Reporting
  • Thermally-Enhanced 48-Pin HTQFP
  • Protection Features:
    • Fault Diagnostics and MCU Watchdog
    • Programmable Dead-Time Control
    • MOSFET Shoot-Through Prevention
    • MOSFET VDS Overcurrent Monitors
    • Gate-Driver Fault Detection
    • Reverse Battery-Protection Support
    • Limp Home-Mode Support
    • Overtemperature Warning and Shutdown

The DRV8305 device is a gate driver IC for three-phase motor-drive applications. The device provides three high-accuracy and temperature compensated half-bridge drivers, each capable of driving a high-side and low-side N-channel MOSFET. A charge pump driver supports 100% duty cycle and low-voltage operation. The device can tolerate load dump voltages up to 45-V.

The DRV8305 device includes three bidirectional current-shunt amplifiers for accurate low-side current measurements that support variable gain settings and an adjustable offset reference.

The DRV8305 device has an integrated voltage regulator (3.3-V or 5-V) to support an MCU or other system power requirements. The voltage regulator can be interfaced directly with a standard LIN physical interface to allow low system standby and sleep currents.

The gate driver uses automatic handshaking when switching to prevent current shoot through. The VDS of both the high-side and low-side MOSFETs is accurately sensed to protect the external MOSFETs from overcurrent conditions. The SPI provides detailed fault reporting, diagnostics, and device configurations such as gain options for the current shunt amplifier, individual MOSFET overcurrent detection, and gate-drive slew-rate control.

Device Options: DRV8305N: Voltage reference DRV83053: 3.3-V, 50-mA LDO DRV83055: 5-V, 50-mA LDO

The DRV8305 device is a gate driver IC for three-phase motor-drive applications. The device provides three high-accuracy and temperature compensated half-bridge drivers, each capable of driving a high-side and low-side N-channel MOSFET. A charge pump driver supports 100% duty cycle and low-voltage operation. The device can tolerate load dump voltages up to 45-V.

The DRV8305 device includes three bidirectional current-shunt amplifiers for accurate low-side current measurements that support variable gain settings and an adjustable offset reference.

The DRV8305 device has an integrated voltage regulator (3.3-V or 5-V) to support an MCU or other system power requirements. The voltage regulator can be interfaced directly with a standard LIN physical interface to allow low system standby and sleep currents.

The gate driver uses automatic handshaking when switching to prevent current shoot through. The VDS of both the high-side and low-side MOSFETs is accurately sensed to protect the external MOSFETs from overcurrent conditions. The SPI provides detailed fault reporting, diagnostics, and device configurations such as gain options for the current shunt amplifier, individual MOSFET overcurrent detection, and gate-drive slew-rate control.

Device Options: DRV8305N: Voltage reference DRV83053: 3.3-V, 50-mA LDO DRV83055: 5-V, 50-mA LDO

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
DRV8323 アクティブ 電流シャント・アンプ搭載、最大 65V の 3 相スマート・ゲート・ドライバ Features absolute maximum rating of 65-V and smaller package size
比較対象デバイスと類似の機能
DRV8304 アクティブ 電流シャント・アンプ搭載、最大 40V の 3 相スマート・ゲート・ドライバ Features slew rate tuning with smart gate drive and absolute maximum rating of 40-V

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
17 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8305 Three Phase Gate Driver With Current Shunt Amplifiers and Voltage Regulator データシート (Rev. B) PDF | HTML 2016年 2月 25日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート System Design Considerations for High-Power Motor Driver Applications PDF | HTML 2021年 6月 22日
アプリケーション・ノート Understanding Smart Gate Drive (Rev. D) 2021年 3月 1日
アプリケーション・ノート スマート・ゲート・ドライブについて (Rev. C 翻訳版) 最新英語版 (Rev.D) 2020年 7月 9日
ホワイト・ペーパー Power Electronics in Motor Drives: Where is it? (Rev. A) 2019年 10月 1日
アプリケーション概要 Low Voltage Motor Drive Operation With Smart Gate Drive 2018年 12月 20日
アプリケーション概要 Field Oriented Control Made Easy for Brushless DC Motors Using Smart Gate Drive (Rev. B) 2018年 8月 22日
アプリケーション・ノート Cut-Off Switch in High-Current Motor-Drive Applications (Rev. A) 2018年 8月 20日
アプリケーション・ノート Dual Motor Ctl Using FCL and Perf Analysis Using SFRA on TMS320F28379D LaunchPad (Rev. A) 2018年 3月 20日
アプリケーション・ノート Performance Analysis of Fast Current Loop (FCL) in Servo 2018年 3月 6日
技術記事 The other motors in electric vehicle systems (part 2) PDF | HTML 2016年 10月 17日
設計ガイド 18-V/400-W 98% Efficient Compact Brushless DC Motor Drive Design Guide 2016年 8月 23日
技術記事 How to minimize MOSFET conduction loss in battery-powered motor drives PDF | HTML 2016年 6月 29日
技術記事 Tools to simplify brushless motor development PDF | HTML 2015年 9月 11日
アプリケーション・ノート Sensored 3-Phase BLDC Motor Control Using MSP430 2011年 7月 20日
アプリケーション・ノート Shelf-Life Evaluation of Lead-Free Component Finishes 2004年 5月 24日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

BOOSTXL-DRV8305EVM — DRV8305N 3 相モーター・ドライブ・ブースタパックの評価基板

BOOSTXL-DRV8305EVM は、DRV8305 モーター・ゲート・ドライバと CSD18540Q5B NexFET™ パワー MOSFET をベースとして、15A を供給する 3 相ブラシレス DC ドライブ段です。この基板は、相ごとの個別 DC バス、相電圧センス機能、さらに個別のローサイド電流シャント・センス機能を搭載しており、センサレス BLDC アルゴリズムに最適です。この基板は、0.6A 降圧 (バック) レギュレータの LMR16006 を使用して、マイコンに 3.3V の電力を供給します。また、短絡、過熱、貫通電流に対する包括的な保護機能を搭載しており、SPI (...)

ユーザー ガイド: PDF
リファレンス・デザイン

TIDA-00771 — ストール電流制限機能付き、10.8V/250W、効率 97% の小型ブラシレス DC モーター・ドライブのリファレンス・デザイン

The TIDA-00771 is a 20 A RMS drive for a three phase brushless DC (BLDC) motor in power tools operating from a 3-cell Li-ion battery with a voltage range of 5 V to 12.6 V. This design is a 45 x 50 mm compact drive implementing sensor-based trapezoidal control. The design uses a discrete, compact (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00916 — ドローン ESC(電子速度コントローラ)向けセンサレス高速 FOC のリファレンス・デザイン

ESC モジュールは、非軍事ドローン向けの重要なサブシステムです。また、飛行時間の延長と動特性の向上、円滑で安定性の高い性能を実現する効率的なモデルを必要とするユーザーにとっても重要です。このリファレンス・デザインは、無人航空機(Unmanned Aerial Vehicle、UAV)、ドローンで一般的に使用されている電子速度コントローラ(Electronic Speed Controller、ESC)を実装しています。

速度制御はセンサレス方式で、モーターは FOC(磁界方向制御)速度制御を使用し、最大 1.2kHz の電気周波数(極対数が 6 のモーターの場合、12kRPM (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00643 — 4.4V ~ 30V、15A、高性能ブラシレス DC ドローン・プロペラ・コントローラのリファレンス・デザイン

TIDA-00643 リファレンス・デザインは、大出力ドローン、クワッドコプター、プロペラ、ファン、ポンプの各アプリケーションに適した、4.4 ~ 30V ブラシレス DC モータ・コントローラを提示します。このデザインは、ブラシレス DC モーター・ゲート・ドライバである TI の DRV8305、30V NexFET パワー MOSFET である CSD17573Q5B、TVS (過渡電圧サプレッサ) 保護 IC である TPD4E05U06、C2000 モーター制御マイコン、および 3.3V 降圧コンバータである LMR16006 (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00772 — ストール電流制限付き 18V/400W 効率 98% 小型ブラシレス DC モーター駆動のリファレンス・デザイン

TIDA-00772 は、5 セルのリチウムイオン・バッテリを電源とし、最大 21V で動作する電動工具に搭載されている 3 相ブラシレス DC(BLDC)モーター向けの 18A RMS ドライブです。このリファレンス・デザインは、センサ・ベースの台形波制御機能を実装した45 x 50mm のコンパクトなドライブです。このリファレンス・デザインは、コンパクトなディスクリート MOSFET をベースとする 3 相インバータを採用し、外部冷却やヒートシンクの必要なしで、18A RMS の連続(1 秒の期間 60A (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00645 — 1-PWM ブラシレス DC モーター制御 TI リファレンス・デザイン

This design is a 3-phase sensored Brushless DC Motor controller that uses a single PWM input for controlling speed and three active-high hall sensors for rotor position detection.  The DRV8305's integrated commutation table simplifies the microcontroller firmware required for proper (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTQFP (PHP) 48 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ