ホーム インターフェイス LVDS、M-LVDS、PECL の各 IC

DS25CP102

アクティブ

Tx プリエンファシス機能と Rx イコライゼーション機能搭載、3.125Gbps、2 x 2 LVDS クロスポイント・スイッチ

製品詳細

Function Crosspoint, Equalizer Protocols CML, LVDS, LVPECL Number of transmitters 2 Number of receivers 2 Supply voltage (V) 3.3 Signaling rate (MBits) 3125 Input signal CML, LVDS, LVPECL Output signal LVDS Rating Catalog Operating temperature range (°C) -40 to 85
Function Crosspoint, Equalizer Protocols CML, LVDS, LVPECL Number of transmitters 2 Number of receivers 2 Supply voltage (V) 3.3 Signaling rate (MBits) 3125 Input signal CML, LVDS, LVPECL Output signal LVDS Rating Catalog Operating temperature range (°C) -40 to 85
WQFN (RGH) 16 16 mm² 4 x 4

  • DC - 3.125 Gbps low jitter, low skew, low power operation
  • Pin configurable, fully differential, non-blocking architecture
  • Pin selectable transmit pre-emphasis and receive equalization eliminate data dependant jitter
  • Wide Input Common Mode Voltage Range allows DC-coupled interface to CML and LVPECL drivers
  • On-chip 100Ω input and output termination minimizes insertion and return losses, reduces component count and minimizes board space
  • 8 kV ESD on LVDS I/O pins protects adjoining components
  • Small 4 mm x 4 mm LLP-16 space saving package

  • DC - 3.125 Gbps low jitter, low skew, low power operation
  • Pin configurable, fully differential, non-blocking architecture
  • Pin selectable transmit pre-emphasis and receive equalization eliminate data dependant jitter
  • Wide Input Common Mode Voltage Range allows DC-coupled interface to CML and LVPECL drivers
  • On-chip 100Ω input and output termination minimizes insertion and return losses, reduces component count and minimizes board space
  • 8 kV ESD on LVDS I/O pins protects adjoining components
  • Small 4 mm x 4 mm LLP-16 space saving package

  • The DS25CP102 is a 3.125 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs.

    The DS25CP102 features two levels (Off and On) of transmit pre-emphasis (PE) and two levels (Off and On) of receive equalization (EQ).

    Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. Each differential input and output is internally terminated with a 100Ω resistor to lower device insertion and return losses, reduce component count and further minimize board space.


    The DS25CP102 is a 3.125 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs.

    The DS25CP102 features two levels (Off and On) of transmit pre-emphasis (PE) and two levels (Off and On) of receive equalization (EQ).

    Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. Each differential input and output is internally terminated with a 100Ω resistor to lower device insertion and return losses, reduce component count and further minimize board space.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    お客様が関心を持ちそうな類似品

    open-in-new 代替品と比較
    比較対象デバイスと同等の機能で、ピン互換製品
    DS25CP102Q-Q1 アクティブ 車載対応、Tx プリエンファシス機能と Rx イコライゼーション機能搭載、3.125Gbps、2 x 2 LVDS クロスポイント・スイッチ Automotive qualified, temperature range (-40C to 85C)

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    4 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート 3.125 Gbps 2X2 LVDS Crosspoint sw w/ Xmit Pre-Emphasis & Receive Equalizati(jp) データシート (Rev. D 翻訳版) 最新英語版 (Rev.E) PDF | HTML 2011年 5月 17日
    アプリケーション・ノート LVDS Repeaters and Crosspoints Extend the Reach of FPD-Link II Interfaces (Rev. A) 2013年 4月 29日
    アプリケーション・ノート AN-1957 LVDS Signal Conditioners Reduce Data-Dependent Jitter (Rev. A) 2013年 4月 26日
    EVM ユーザー ガイド (英語) 3.125 Gbps 2x2 LVDS Crosspoint Switch Evaluation Board 2012年 1月 25日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価ボード

    DS25CP102EVK — 3.125Gbps 2x2 LVDS クロスポイント・スイッチ評価ボード

    The DS25CP102EVK is an evaluation kit designed for demonstrating performance of the DS25CP102, a 3.125 Gbps 2x2 LVDS Crosspoint Switch with transmit pre-emphasis and receive equalization. The evaluation kit is comprised of the DS25CP102 with its associated input and output SMA connectors and (...)

    ユーザー ガイド: PDF
    シミュレーション・モデル

    DS25CP102 IBIS Model

    SNLM064.ZIP (12 KB) - IBIS Model
    シミュレーション・ツール

    PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

    PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

    設計とシミュレーション向けの環境である PSpice for TI (...)
    シミュレーション・ツール

    TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

    TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

    TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

    TINA は DesignSoft (...)

    ユーザー ガイド: PDF
    英語版 (Rev.A): PDF
    パッケージ ピン数 ダウンロード
    WQFN (RGH) 16 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ