ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

LM26001-Q1

アクティブ

1.5A、スイッチング・レギュレータ、高効率スリープ・モード付き

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LMR43610-Q1 アクティブ 車載対応、3V ~ 36V、1A、低静止電流 (IQ)、低 EMI、同期整流降圧レギュレータ Smaller footprint, higher efficiency, lower EMI, lower IQ and spread-spectrum.

製品詳細

Vin (min) (V) 3 Vin (max) (V) 38 Vout (min) (V) 1.25 Vout (max) (V) 35 Iout (max) (A) 1.5 Iq (typ) (mA) 0.038 Switching frequency (min) (kHz) 150 Switching frequency (max) (kHz) 500 Features Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable Operating temperature range (°C) -40 to 125 Rating Automotive Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
Vin (min) (V) 3 Vin (max) (V) 38 Vout (min) (V) 1.25 Vout (max) (V) 35 Iout (max) (A) 1.5 Iq (typ) (mA) 0.038 Switching frequency (min) (kHz) 150 Switching frequency (max) (kHz) 500 Features Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable Operating temperature range (°C) -40 to 125 Rating Automotive Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
HTSSOP (PWP) 16 32 mm² 5 x 6.4

  • LM26001Q is an Automotive Grade product that is AEC-Q100 grade 1 qualified (-40°C to +125°C operating junction temperature)
  • High efficiency sleep mode
  • 40 µA typical Iq in sleep mode
  • 10 µA typical Iq in shutdown mode
  • 3.0V minimum input voltage
  • 4.0V to 38V continuous input range
  • 1.5% reference accuracy
  • Cycle-by-cycle current limit
  • Adjustable Frequency (150 kHz to 500 kHz)
  • Synchronizable to an external clock
  • Power Good Flag
  • Forced PWM function
  • Adjustable Soft-start
  • TSSOP-16 exposed pad package
  • Thermal Shut Down

  • LM26001Q is an Automotive Grade product that is AEC-Q100 grade 1 qualified (-40°C to +125°C operating junction temperature)
  • High efficiency sleep mode
  • 40 µA typical Iq in sleep mode
  • 10 µA typical Iq in shutdown mode
  • 3.0V minimum input voltage
  • 4.0V to 38V continuous input range
  • 1.5% reference accuracy
  • Cycle-by-cycle current limit
  • Adjustable Frequency (150 kHz to 500 kHz)
  • Synchronizable to an external clock
  • Power Good Flag
  • Forced PWM function
  • Adjustable Soft-start
  • TSSOP-16 exposed pad package
  • Thermal Shut Down

  • The LM26001 is a switching regulator designed for the high efficiency requirements of applications with stand-by modes. The device features a low-current sleep mode to maintain efficiency under light-load conditions and current-mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10 µA typically in shutdown mode and less than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.

    The LM26001 can deliver up to 1.5A of continuous load current with a fixed current limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0V to 38V and can operate with input voltages as low as 3V during line transients.

    Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock.

    Other features include Power good, adjustable soft-start, enable pin, input under-voltage protection, and an internal bootstrap diode for reduced component count.


    The LM26001 is a switching regulator designed for the high efficiency requirements of applications with stand-by modes. The device features a low-current sleep mode to maintain efficiency under light-load conditions and current-mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10 µA typically in shutdown mode and less than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.

    The LM26001 can deliver up to 1.5A of continuous load current with a fixed current limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0V to 38V and can operate with input voltages as low as 3V during line transients.

    Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock.

    Other features include Power good, adjustable soft-start, enable pin, input under-voltage protection, and an internal bootstrap diode for reduced component count.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    お客様が関心を持ちそうな類似品

    open-in-new 代替品と比較
    比較対象デバイスと同等の機能で、ピン配置が異なる製品
    LM63615-Q1 アクティブ スペクトラム拡散機能搭載、3.5V ~ 36V、1.5A 降圧電圧コンバータ Next-generation 3.5-V to 36-V, 1.5-A step-down voltage converter with spread spectrum.

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    2 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート LM26001/LM26001Q 1.5A Switching Regulator with High Efficiency Sleep Mode (jp) データシート (Rev. F 翻訳版) 最新英語版 (Rev.I) PDF | HTML 2010年 11月 29日
    EVM ユーザー ガイド (英語) AN-1454 LM26001 Evaluation Board (Rev. B) 2013年 4月 24日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価ボード

    LM26001EVAL — 1.5A スイッチング・レギュレータ、高効率スリープ・モード付

    LM26001 1.5A Switching Regulator with High Efficiency Sleep Mode

    ユーザー ガイド: PDF
    シミュレーション・モデル

    LM26001 PSpice Average Model

    SNVM147.ZIP (55 KB) - PSpice Model
    シミュレーション・モデル

    LM26001 PSpice Transient Model

    SNVMAG0.ZIP (134 KB) - PSpice Model
    シミュレーション・モデル

    LM26001 Unencrypted PSpice Average Model

    SNVM875.ZIP (1 KB) - PSpice Model
    シミュレーション・モデル

    LM26001 Unencrypted PSpice Transient Model

    SNVMAG1.ZIP (7 KB) - PSpice Model
    シミュレーション・ツール

    PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

    PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

    設計とシミュレーション向けの環境である PSpice for TI (...)
    パッケージ ピン数 ダウンロード
    HTSSOP (PWP) 16 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ