ミュート搭載、高性能、40W オーディオ・パワー・アンプ

製品詳細

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 60 Power stage supply (min) (V) 20 Load (min) (Ω) 4 Output power (W) 40 THD + N at 1 kHz (%) 0.06 Iq (typ) (mA) 24 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 20 Analog supply voltage (max) (V) 60 PSRR (dB) 125 Operating temperature range (°C) -20 to 85
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 60 Power stage supply (min) (V) 20 Load (min) (Ω) 4 Output power (W) 40 THD + N at 1 kHz (%) 0.06 Iq (typ) (mA) 24 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 20 Analog supply voltage (max) (V) 60 PSRR (dB) 125 Operating temperature range (°C) -20 to 85
TO-220 (NDA) 11 195.4953 mm² 20.02 x 9.765
  • 40W continuous average output power into 8
  • 75W instantaneous peak output power capability
  • Signal-to-Noise Ratio >= 95 dB(min)
  • An input mute function
  • Output protection from a short to ground or to the supplies via internal current limiting circuitry
  • Output over-voltage protection against transients from inductive loads
  • Supply under-voltage protection, not allowing internal biasing to occur when |VEE| + |VCC| <= 12V, thus eliminating turn-on and turn-off transients
  • 11-lead TO-220 package
  • Wide supply range 20V - 72V

  • 40W continuous average output power into 8
  • 75W instantaneous peak output power capability
  • Signal-to-Noise Ratio >= 95 dB(min)
  • An input mute function
  • Output protection from a short to ground or to the supplies via internal current limiting circuitry
  • Output over-voltage protection against transients from inductive loads
  • Supply under-voltage protection, not allowing internal biasing to occur when |VEE| + |VCC| <= 12V, thus eliminating turn-on and turn-off transients
  • 11-lead TO-220 package
  • Wide supply range 20V - 72V

The LM2876 is a high-performance audio power amplifier capable of delivering 40W of continuous average power to an 8 load with 0.1% THD+N from 20Hz-20kHz.

The performance of the LM2876, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe™) protection circuitry, puts it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are completely safeguarded at the output against overvoltage, undervoltage, overloads, including shorts to the supplies, thermal runaway, and instantaneous temperature peaks.

The LM2876 maintains an excellent signal-to-noise ratio of greater than 95dB (min) with a typical low noise floor of 2.0µV. It exhibits extremely low THD+N values of 0.06% at the rated output into the rated load over the audio spectrum, and provides excellent linearity with an IMD (SMPTE) typical rating of 0.004%.


The LM2876 is a high-performance audio power amplifier capable of delivering 40W of continuous average power to an 8 load with 0.1% THD+N from 20Hz-20kHz.

The performance of the LM2876, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe™) protection circuitry, puts it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are completely safeguarded at the output against overvoltage, undervoltage, overloads, including shorts to the supplies, thermal runaway, and instantaneous temperature peaks.

The LM2876 maintains an excellent signal-to-noise ratio of greater than 95dB (min) with a typical low noise floor of 2.0µV. It exhibits extremely low THD+N values of 0.06% at the rated output into the rated load over the audio spectrum, and provides excellent linearity with an IMD (SMPTE) typical rating of 0.004%.


ダウンロード 字幕付きのビデオを表示 ビデオ

次世代製品、50W、ステレオ、アナログ入力 Class-D オーディオ アンプ: TTPA3116D2

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
4 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM2876 Overture Audio Pwr Amp Series High-Perf 40W Audio Pwr Amplifier w/Mu(jp) データシート (Rev. B 翻訳版) 最新英語版 (Rev.C) PDF | HTML 2004年 10月 14日
アプリケーション・ノート AN-1192 Overture Series High Power Solutions (Rev. B) 2013年 5月 1日
アプリケーション・ノート AN-898 Audio Amplifiers Utilizing: SPiKe Protection (Rev. B) 2013年 5月 1日
その他の技術資料 Die D/S LM2876 MDC High-Performance 40 Watt Audio Power Amplifier W/Mute 2012年 9月 20日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

LM2876 TINA-TI Reference Design

SNAM088.TSC (101 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM2876 TINA-TI Spice Model

SNAM087.ZIP (21 KB) - TINA-TI Spice Model
シミュレーション・モデル

LM2876 Unencrypted PSpice Model Package (Rev. A)

SNAM085A.ZIP (21 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
TO-220 (NDA) 11 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ