ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧 コントローラ (外部スイッチ)

4.5 ~ 75V の広い入力電圧範囲 (Vin)、コンスタント・オンタイム、非同期整流 PFET 降圧コントローラ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM5141 アクティブ 低静止電流(Iq)、広い入力電圧範囲の同期整流降圧型コントローラ Optional spread spectrum for improved EMI.

製品詳細

Vin (min) (V) 4.5 Vin (max) (V) 75 Vout (min) (V) 1.25 Vout (max) (V) 75 Iout (max) (A) 10 Iq (typ) (mA) 1.3 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Features Adjustable current limit, Enable, Frequency synchronization Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Number of phases 1 Rating Catalog Control mode Constant on-time (COT) Type Controller
Vin (min) (V) 4.5 Vin (max) (V) 75 Vout (min) (V) 1.25 Vout (max) (V) 75 Iout (max) (A) 10 Iq (typ) (mA) 1.3 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Features Adjustable current limit, Enable, Frequency synchronization Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Number of phases 1 Rating Catalog Control mode Constant on-time (COT) Type Controller
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9 VSSOP (DGK) 8 14.7 mm² 3 x 4.9 WSON (NGQ) 8 9 mm² 3 x 3
  • LM5085-Q1 is an Automotive Grade Product that
    is AEC-Q100 Grade 1 Qualified (–40°C to 125°C
    Operating Junction Temperature)
  • Wide 4.5-V to 75-V Input Voltage Range
  • Adjustable Current Limit Using RDS(ON) or a
    Current Sense Resistor
  • Programmable Switching Frequency to 1MHz
  • No Loop Compensation Required
  • Ultra-Fast Transient Response
  • Nearly Constant Operating Frequency with Line
    and Load Variations
  • Adjustable Output Voltage from 1.25 V
  • Precision ±2% Feedback Reference
  • Capable of 100% Duty Cycle Operation
  • Internal Soft-start Timer
  • Integrated High Voltage Bias Regulator
  • Thermal Shutdown
  • Package:
    • HVSSOP-8
    • VSSOP-8
    • WSON-8
  • LM5085-Q1 is an Automotive Grade Product that
    is AEC-Q100 Grade 1 Qualified (–40°C to 125°C
    Operating Junction Temperature)
  • Wide 4.5-V to 75-V Input Voltage Range
  • Adjustable Current Limit Using RDS(ON) or a
    Current Sense Resistor
  • Programmable Switching Frequency to 1MHz
  • No Loop Compensation Required
  • Ultra-Fast Transient Response
  • Nearly Constant Operating Frequency with Line
    and Load Variations
  • Adjustable Output Voltage from 1.25 V
  • Precision ±2% Feedback Reference
  • Capable of 100% Duty Cycle Operation
  • Internal Soft-start Timer
  • Integrated High Voltage Bias Regulator
  • Thermal Shutdown
  • Package:
    • HVSSOP-8
    • VSSOP-8
    • WSON-8

The LM5085 is a high efficiency PFET switching regulator controller that can be used to quickly and easily develop a small, efficient buck regulator for a wide range of applications. This high voltage controller contains a PFET gate driver and a high voltage bias regulator which operates over a wide 4.5-V to 75-V input range. The constant on-time regulation principle requires no loop compensation, simplifies circuit implementation, and results in ultrafast load transient response. The operating frequency remains nearly constant with line and load variations due to the inverse relationship between the input voltage and the on-time. The PFET architecture allows 100% duty cycle operation for a low dropout voltage. Either the RDS(ON) of the PFET or an external sense resistor can be used to sense current for over-current detection.

The LM5085 is a high efficiency PFET switching regulator controller that can be used to quickly and easily develop a small, efficient buck regulator for a wide range of applications. This high voltage controller contains a PFET gate driver and a high voltage bias regulator which operates over a wide 4.5-V to 75-V input range. The constant on-time regulation principle requires no loop compensation, simplifies circuit implementation, and results in ultrafast load transient response. The operating frequency remains nearly constant with line and load variations due to the inverse relationship between the input voltage and the on-time. The PFET architecture allows 100% duty cycle operation for a low dropout voltage. Either the RDS(ON) of the PFET or an external sense resistor can be used to sense current for over-current detection.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
9 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM5085/-Q1 75-V Constant On-Time PFET Buck Switching Controller データシート (Rev. I) PDF | HTML 2015年 8月 12日
技術記事 Crafty idea: Create a 150V non synchronous buck solution with a lower Vin rated co PDF | HTML 2017年 8月 25日
Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 2016年 7月 21日
技術記事 How to design for EMC and isolation with Fly-Buck™ converters PDF | HTML 2015年 7月 28日
アプリケーション・ノート Transient Response versus Ripple – An Analysis of Ripple Injection Techniques 2014年 4月 28日
ホワイト・ペーパー Wide VIN power management ICs simplify white paper (Rev. A) 2013年 9月 19日
EVM ユーザー ガイド (英語) AN-1878 LM5085 Evaluation Board (Rev. B) 2013年 4月 30日
アプリケーション・ノート Constant Current Constant Voltage Buck Converter w/LM25085 (Rev. A) 2013年 4月 23日
アプリケーション・ノート Designing Non-Invert Buck-Boost (Zeta) Cnvrts w/a Buck P-FET Cntrl 2011年 4月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM5085EVAL — LM5085 - 75V コンスタント・オンタイム PFET バック・スイッチング・コントローラ

The LM5085 evaluation board provides the design engineer with a fully functional buck regulator, employing the LM5085 PFET switching controller which uses the constant on-time (COT) operating principle. The evaluation board provides a 5V output over an input range of 5.5V to 55V. The circuit (...)

ユーザー ガイド: PDF
シミュレーション・モデル

LM5085 PSpice Transient Model (Rev. A)

SNVM213A.ZIP (135 KB) - PSpice Model
シミュレーション・モデル

LM5085 PSpice Unencrypted Transient Model (Rev. B)

SNVM213B.ZIP (147 KB) - PSpice Model
シミュレーション・モデル

LM5085 TINA-TI Load Transient Reference Design (Rev. A)

SNVM496A.TSC (135 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM5085 TINA-TI Startup Reference Design (Rev. A)

SNVM497A.TSC (136 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM5085 TINA-TI Transient Spice Model (Rev. A)

SNVM498A.ZIP (20 KB) - TINA-TI Spice Model
シミュレーション・モデル

LM5085 Unencrypted PSpice Transient Model

SNVM955.ZIP (3 KB) - PSpice Model
計算ツール

LM25085-5085QUICK-CALC — LM(2)5085 クイック・スタート・カリキュレータ

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP9103 — 低コスト降圧コンバータ、ワイヤレス・ベース・ステーション用 32V 入力からの 24V (2A) を供給

このヒステリシス降圧コンバータは、97% を上回る効率と同時に、低コストおよび狭い面積を実現します。追加の利点は、非常に低い出力リップル電圧と、優れた負荷過渡応答です。
試験報告書: PDF
パッケージ ピン数 ダウンロード
HVSSOP (DGN) 8 オプションの表示
VSSOP (DGK) 8 オプションの表示
WSON (NGQ) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ