ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧 コントローラ (外部スイッチ)

5.5 ~ 65V、広い入力電圧範囲、電流モードの同期整流・降圧コントローラ、アナログ電流モニタ付き

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM5141 アクティブ 低静止電流(Iq)、広い入力電圧範囲の同期整流降圧型コントローラ Optional spread spectrum for improved EMI.

製品詳細

Vin (min) (V) 5.5 Vin (max) (V) 65 Vout (min) (V) 0.8 Vout (max) (V) 62 Iout (max) (A) 20 Iq (typ) (mA) 4.8 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 750 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Synchronous Rectification, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Number of phases 1 Rating Catalog Control mode current mode Type Controller
Vin (min) (V) 5.5 Vin (max) (V) 65 Vout (min) (V) 0.8 Vout (max) (V) 62 Iout (max) (A) 20 Iq (typ) (mA) 4.8 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 750 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Synchronous Rectification, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Number of phases 1 Rating Catalog Control mode current mode Type Controller
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4 WQFN (RTW) 24 16 mm² 4 x 4
  • LM5117-Q1 is Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: -40°C to 125°C
      Ambient Operating Temperature Range
  • Emulated Peak Current Mode Control
  • Wide Operating Range from 5.5 V to 65 V
  • Robust 3.3-A Peak Gate Drives
  • Adaptive Dead-Time Output Driver Control
  • Free-Run or Synchronizable Clock up to 750 kHz
  • Optional Diode Emulation Mode
  • Programmable Output from 0.8 V
  • Precision 1.5% Voltage Reference
  • Analog Current Monitor
  • Programmable Current Limit
  • Hiccup Mode Overcurrent Protection
  • Programmable Soft-Start and Tracking
  • Programmable Line Undervoltage Lockout
  • Programmable Switchover to External Bias Supply
  • Thermal Shutdown
  • LM5117-Q1 is Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: -40°C to 125°C
      Ambient Operating Temperature Range
  • Emulated Peak Current Mode Control
  • Wide Operating Range from 5.5 V to 65 V
  • Robust 3.3-A Peak Gate Drives
  • Adaptive Dead-Time Output Driver Control
  • Free-Run or Synchronizable Clock up to 750 kHz
  • Optional Diode Emulation Mode
  • Programmable Output from 0.8 V
  • Precision 1.5% Voltage Reference
  • Analog Current Monitor
  • Programmable Current Limit
  • Hiccup Mode Overcurrent Protection
  • Programmable Soft-Start and Tracking
  • Programmable Line Undervoltage Lockout
  • Programmable Switchover to External Bias Supply
  • Thermal Shutdown

The LM5117 is a synchronous buck controller intended for step-down regulator applications from a high voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage applications.

The operating frequency is programmable from 50 kHz to 750 kHz. The LM5117 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation for improved efficiency at light load conditions. A high voltage bias regulator that allows external bias supply further improves efficiency. The LM5117’s unique analog telemetry feature provides average output current information. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit, and adjustable line undervoltage lockout.

The LM5117 is a synchronous buck controller intended for step-down regulator applications from a high voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage applications.

The operating frequency is programmable from 50 kHz to 750 kHz. The LM5117 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation for improved efficiency at light load conditions. A high voltage bias regulator that allows external bias supply further improves efficiency. The LM5117’s unique analog telemetry feature provides average output current information. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit, and adjustable line undervoltage lockout.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
11 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM5117/Q1 Wide Input Range Synchronous Buck Controller with Analog Current Monitor データシート (Rev. F) PDF | HTML 2015年 8月 27日
ホワイト・ペーパー Valuing wide VIN, low EMI synchronous buck circuits for cost-driven, demanding a (Rev. A) 2019年 4月 10日
ホワイト・ペーパー Overcoming Challenges in Designing Step-Dwn Reg Apps w/40V Input Voltage (Rev. A) 2018年 7月 3日
アプリケーション・ノート How to Design a Simple Constant Current/Constant Voltage Buck Converter 2018年 6月 26日
技術記事 How to design a simple constant-current/constant-power/constant-voltage-regulating PDF | HTML 2018年 5月 2日
ホワイト・ペーパー コストが重視される、要求の厳しいアプリケーション向けのワイドVin、低EMIの同期整流方式降圧型回路の評価 最新英語版 (Rev.A) 2017年 1月 31日
Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 2016年 7月 21日
ホワイト・ペーパー Wide VIN power management ICs simplify white paper (Rev. A) 2013年 9月 19日
ユーザー・ガイド AN-2065 LM5119 Evaluation Board (Rev. B) 2013年 4月 24日
ユーザー・ガイド AN-2103 LM5117 Evaluation Board (Rev. B) 2013年 4月 24日
アプリケーション・ノート Precision Output Current Limiting Using Average Current Monitor Feature 2011年 6月 21日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM5117EVAL — LM5117 評価ボード

The LM5117 evaluation board provides the design engineer with a fully functional synchronous buck converter based on Emulated Current Mode Control to evaluate the LM5117 controller IC. The evaluation board provides 12V output with a 9A current capability in addition with average output current (...)

ユーザー ガイド: PDF
シミュレーション・モデル

LM5117 PSpice Transient Model (Rev. A)

SNVM040A.ZIP (82 KB) - PSpice Model
シミュレーション・モデル

LM5117 TINA-TI Transient Reference Design (Rev. A)

SNVM619A.TSC (1077 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM5117 TINA-TI Transient Spice Model (Rev. A)

SNVM620A.ZIP (30 KB) - TINA-TI Spice Model
シミュレーション・モデル

LM5117 Unencrypted PSpice Transient Model

SNVM960.ZIP (357 KB) - PSpice Model
計算ツール

LM5117QUICK-CALC — LM5117 クイック・スタート・カリキュレータ

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP10852 — 高出力、小型フォーム・ファクタ、同期整流・降圧コンバータ、12V@15A の出力、リファレンス・デザイン

The PMP10852 reference design uses the LM5117, CSD18563 for the high side MOSFET and CSD18532 (x2) for the low side MOSFETs.  PMP10852 takes input voltages between 27V to 41V and outputs 180W(12V @15A).  The size is very small, total area is 1,200mm2 (30mm x 40mm) solution size. The (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP20808 — 450W 高効率 25V 降圧コンバータのリファレンス・デザイン

PMP20808 is a single-phase synchronous cuck converter reference design using the LM5117 controller IC. The design accepts an input voltage of 36Vin to 40Vin (38Vin Nominal) and provides an output of 25Vout capable of supplying 18A of continuous current to the load. The design was built on the (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP20904 — 産業用アプリケーション向け 100W 負出力電源のリファレンス・デザイン

The PMP20904 reference design is a negative buck utilizing the LM5117 controller for industrial applications. This design can operate at 24Vin at +/-10%. The design has an output of -24V and capable of sourcing 2A continuous current and up to 4A transient. Switching frequency is set to (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP10852B — 高出力、小型フォーム・ファクタ、同期整流・降圧コンバータ、12V@15A の出力、リファレンス・デザイン

The PMP10852B reference design uses the LM5117, CSD18563 for the high side MOSFET and CSD18532 (x2) for the low side MOSFETs.  PMP10852B takes input voltages between 27V to 41V and outputs 180W(12V @15A).  The size is very small, total area is 1,200mm2 (30mm x 40mm) solution size. The (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 20 オプションの表示
WQFN (RTW) 24 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ