ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

LMR14050

アクティブ

40μA の静止電流 (IQ)、SIMPLE SWITCHER® 40V、5A、2.2MHz、降圧コンバータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LMR51450 アクティブ 36V、5A、同期整流降圧コンバータ Smaller solution size, higher efficiency and lower EMI.

製品詳細

Vin (min) (V) 4 Vin (max) (V) 40 Vout (min) (V) 1 Vout (max) (V) 36 Iout (max) (A) 5 Iq (typ) (mA) 0.04 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2500 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
Vin (min) (V) 4 Vin (max) (V) 40 Vout (min) (V) 1 Vout (max) (V) 36 Iout (max) (A) 5 Iq (typ) (mA) 0.04 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2500 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
HSOIC (DDA) 8 29.4 mm² 4.9 x 6
  • 4 V to 40 V Input Range
  • 5 A Continuous Output Current
  • Ultra-low 40 µA Operating Quiescent Current
  • 90 mΩ High-Side MOSFET
  • Minimum Switch-On Time: 75 ns
  • Current Mode Control
  • Adjustable Switching Frequency from 200 kHz to
    2.5 MHz
  • Frequency Synchronization to External Clock
  • Internal Compensation for Ease of Use
  • High Duty Cycle Operation Supported
  • Precision Enable Input
  • 1 µA Shutdown Current
  • External Soft-start
  • Thermal, Overvoltage and Short Protection
  • 8-Pin HSOIC with PowerPAD™ Package
  • 4 V to 40 V Input Range
  • 5 A Continuous Output Current
  • Ultra-low 40 µA Operating Quiescent Current
  • 90 mΩ High-Side MOSFET
  • Minimum Switch-On Time: 75 ns
  • Current Mode Control
  • Adjustable Switching Frequency from 200 kHz to
    2.5 MHz
  • Frequency Synchronization to External Clock
  • Internal Compensation for Ease of Use
  • High Duty Cycle Operation Supported
  • Precision Enable Input
  • 1 µA Shutdown Current
  • External Soft-start
  • Thermal, Overvoltage and Short Protection
  • 8-Pin HSOIC with PowerPAD™ Package

The LMR14050 is a 40 V, 5 A step down regulator with an integrated high-side MOSFET. With a wide input range from 4 V to 40 V, it’s suitable for various applications from industrial to automotive for power conditioning from unregulated sources. The regulator’s quiescent current is 40 µA in Sleep-mode, which is suitable for battery powered systems. An ultra-low 1 µA current in shutdown mode can further prolong battery life. A wide adjustable switching frequency range allows either efficiency or external component size to be optimized. Internal loop compensation means that the user is free from the tedious task of loop compensation design. This also minimizes the external components of the device. A precision enable input allows simplification of regulator control and system power sequencing. The device also has built-in protection features such as cycle-by-cycle current limit, thermal sensing and shutdown due to excessive power dissipation, and output overvoltage protection.

The LMR14050 is a 40 V, 5 A step down regulator with an integrated high-side MOSFET. With a wide input range from 4 V to 40 V, it’s suitable for various applications from industrial to automotive for power conditioning from unregulated sources. The regulator’s quiescent current is 40 µA in Sleep-mode, which is suitable for battery powered systems. An ultra-low 1 µA current in shutdown mode can further prolong battery life. A wide adjustable switching frequency range allows either efficiency or external component size to be optimized. Internal loop compensation means that the user is free from the tedious task of loop compensation design. This also minimizes the external components of the device. A precision enable input allows simplification of regulator control and system power sequencing. The device also has built-in protection features such as cycle-by-cycle current limit, thermal sensing and shutdown due to excessive power dissipation, and output overvoltage protection.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM61460 アクティブ 3V ~ 36V、6A、低 EMI、同期整流降圧コンバータ Next-generation 36-V, 6-A converter.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
14 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LMR14050 SIMPLE SWITCHER® 40 V 5 A, 2.2 MHz Step-Down Converter with 40 µA IQ データシート (Rev. A) PDF | HTML 2015年 3月 17日
アプリケーション・ノート Simple Solution for EMI Filter Stability Issue in DC/DC Converters (Rev. A) 2019年 4月 25日
アプリケーション・ノート How to Evaluate Junction Temperature Properly with Thermal Metrics (Rev. B) 2019年 3月 29日
アプリケーション・ノート How SYNC Logic Affects EMI Performance for Dual-Channel Buck Converters 2018年 4月 27日
技術記事 There are more ways than you think to reduce conducted EMI PDF | HTML 2018年 4月 17日
アプリケーション・ノート Design Feedforward Capacitor for LMR14020 2017年 12月 20日
アプリケーション・ノート How to Evaluate the Maximum Inductor in Internal Compensation PCM Buck Converter 2017年 9月 20日
アプリケーション・ノート Extending Buck Regulator to Positive Buck-Boost Configuration 2017年 9月 2日
EVM ユーザー ガイド (英語) LMR14050EVM User's Guide 2015年 1月 30日
アプリケーション・ノート AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013年 4月 24日
アプリケーション・ノート AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013年 4月 23日
アプリケーション・ノート AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013年 4月 23日
その他の技術資料 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005年 7月 12日
アプリケーション・ノート AN-643 EMI/RFI Board Design (Rev. B) 2004年 5月 3日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LMR14050SEVM — LMR14050SEVM 7V ~ 36V 入力、5A 時 5.0/3.3V 出力降圧コンバータ

The LMR14050SEVM is a fully assembled and tested circuit for evaluating the LMR14050S Step-Down Converter. The LMR14050SEVM operates from 7V to 36V input (12V nominal) and provides a 5.0V or 3.3V output at 5A. The board also has jumper connectors to enable or disable the converter operation, change (...)

ユーザー ガイド: PDF
シミュレーション・モデル

LMR14050S PSPICE Transient Model

SNVM708.ZIP (62 KB) - PSpice Model
シミュレーション・モデル

LMR14050S Unencrypted PSpice Transient Model

SNVM923.ZIP (6 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-01458 — 超音波 CW パルサ向け低ノイズ、固定ドロップアウト、±2.5 ~ ±12V 出力、3A 電源のリファレンス・デザイン

このリファレンス・デザインを採用すると、デジタル・プログラマブルな電源を使用して、24V バスから連続波(CW)モードの超音波送信回路に電力を供給することができます。±2.5 ~ ±12Vの可変出力が 2 つあり、いずれもユーザー・ソフトウェアで制御できます。これらの出力は最大 2A を供給し、正と負両方のレギュレータ出力でリップルとノイズを非常に低く抑制することができます。この電源は拡張性に優れており、パラレル接続のレギュレータを追加する方法で、出力電流を最大 3A に引き上げることができます。また、この電源を外部クロックと同期することも可能です。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

PMP10743 — 7~40V 広入力範囲 3 出力 SIMPLE SWITCHER® リファレンス・デザイン、LMR14050 および LMZ20502 使用

The reference design shows the wide input voltage capability, simple layout, and small solution size of the LMR14050 SIMPLE SWITCHER® Buck Converter and the LMZ20502 Nano Module. The LMR14050 provides a 5V output rail which feeds into two LMZ20502 Nano Modules.  The modules provide a 3.3V (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP10680 — 4.5V~24V 広入力範囲、マイナス 5V/2A 出力の非同期コンバータ、リファレンス・デザイン

The PMP10680 reference design is a non-sync buck converter with buck-boost configuration. The PMP10680 accepts an input voltage of 4.5 to 24Vin and provides a negative 5V output capable of supplying continuous 2A of current to the load. With negative output and the self-positive input, (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HSOIC (DDA) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ