MSP430FR203x ミックスド・シグナル・マイコン - MSP430FR2032

MSP430FR2032 (供給中)

MSP430FR203x ミックスド・シグナル・マイコン

 

Sampling

Samples may not be available for all device variants. In this case, superset or distribution format variants can be found under 'Alternative Samples' on the Sample & Buy tab. The superset devices will contain an equivalent or greater feature set than the devices on this product page, while distribution format variations represent no difference in functionality from the chosen device.

概要

The TI MSP430 family of low-power microcontrollers consists of several devices that feature different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The DCO allows the device to wake up from low-power modes to active mode in less than 10 µs.

特長

  • Embedded Microcontroller
    • 16-Bit RISC Architecture up to 16 MHz
    • Wide Supply Voltage Range From 1.8 V to 3.6 V
  • Optimized Low-Power Modes (at 3 V)
    • Active: 126 µA/MHz
    • Standby
      • LPM3.5 With VLO: 0.4 µA
      • Real-Time Clock (RTC) Counter (LPM3.5 With 32768-Hz Crystal): 0.77 µA
    • Shutdown (LPM4.5): 15 nA
  • Low-Power Ferroelectric RAM (FRAM)
    • Up to 15.5KB of Nonvolatile Memory
    • Built-In Error Correction Code (ECC)
    • Configurable Write Protection
    • Unified Memory of Program, Constants, and Storage
    • 1015 Write Cycle Endurance
    • Radiation Resistant and Nonmagnetic
  • Intelligent Digital Peripherals
    • IR Modulation Logic
    • Two 16-Bit Timers With Three Capture/Compare Registers Each (Timer_A3)
    • One 16-Bit Counter-Only RTC Counter
    • 16-Bit Cyclic Redundancy Check (CRC)
  • Enhanced Serial Communications
    • Enhanced USCI A (eUSCI_A) Supports UART, IrDA, and SPI
    • Enhanced USCI B (eUSCI_B) Supports SPI and I2C
  • High-Performance Analog
    • 10-Channel 10-Bit Analog-to-Digital Converter (ADC)
      • Internal 1.5-V Reference
      • Sample-and-Hold 200 ksps
  • Clock System (CS)
    • On-Chip 32-kHz RC Oscillator (REFO)
    • On-Chip 16-MHz Digitally Controlled Oscillator (DCO) With Frequency Locked Loop (FLL)
      • ±1% Accuracy With On-Chip Reference at Room Temperature
    • On-Chip Very Low-Frequency 10-kHz Oscillator (VLO)
    • On-Chip High-Frequency Modulation Oscillator (MODOSC)
    • External 32-kHz Crystal Oscillator (XT1)
    • Programmable MCLK Prescalar of 1 to 128
    • SMCLK Derived From MCLK With Programmable Prescalar of 1, 2, 4, or 8
  • General Input/Output and Pin Functionality
    • Total 60 I/Os on 64-Pin Package
    • 16 Interrupt Pins (P1 and P2) Can Wake up MCU From LPMs
    • All I/Os are Capacitive Touch I/Os
  • Development Tools and Software
    • Free Professional Development Environments
  • Family Members
    • MSP430FR2033: 15KB of Program FRAM + 512B of Information FRAM + 2KB of RAM
    • MSP430FR2032: 8KB of Program FRAM + 512B of Information FRAM + 1KB of RAM
  • Package Options
    • 64 Pin: LQFP (PM)
    • 56 Pin: TSSOP (G56)
    • 48 Pin: TSSOP (G48)

詳細を表示

機能一覧 他の製品と比較 MSP430FRxx FRAM

 
CPU
Frequency (MHz)
Non-volatile Memory (KB)
RAM (KB)
GPIO Pins (#)
I2C
SPI
UART
DMA
ADC
Comparators (#)
Timers - 16-bit
Timers - 32-bit
Multiplier
AES
BSL
Min VCC
Max VCC
Active Power (uA/MHz)
Standby Power (LPM3-uA)
Wakeup Time (us)
Features
Special I/O
Rating
Operating Temperature Range (C)
Package Group
Package Size: mm2:W x L (PKG)
MSP430FR2032
MSP430   
16   
8   
1   
60   
1   
2   
1   
0   
ADC10 - 10ch   
0   
2   
0   
N/A   
N/A   
UART   
1.8   
3.6   
126   
1.31   
10   
Real-Time Clock
Watchdog
Temp Sensor
Brown Out Reset   
N/A   
Catalog   
-40 to 85   
LQFP
TSSOP
TSSOP   
64LQFP: 144 mm2: 12 x 12(LQFP)
48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)
56TSSOP: 113 mm2: 8.1 x 14(TSSOP)