MSP430FR2033 ミックスド・シグナル・マイコン - MSP430FR2033

MSP430FR2033 (供給中)

MSP430FR2033 ミックスド・シグナル・マイコン

 

概要

The TI MSP430 family of low-power microcontrollers consists of several devices that feature different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The DCO allows the device to wake up from low-power modes to active mode in less than 10 µs.

特長

  • Embedded Microcontroller
    • 16-Bit RISC Architecture up to 16 MHz
    • Wide Supply Voltage Range From 1.8 V to 3.6 V
  • Optimized Low-Power Modes (at 3 V)
    • Active: 126 µA/MHz
    • Standby
      • LPM3.5 With VLO: 0.4 µA
      • Real-Time Clock (RTC) Counter (LPM3.5 With 32768-Hz Crystal): 0.77 µA
    • Shutdown (LPM4.5): 15 nA
  • Low-Power Ferroelectric RAM (FRAM)
    • Up to 15.5KB of Nonvolatile Memory
    • Built-In Error Correction Code (ECC)
    • Configurable Write Protection
    • Unified Memory of Program, Constants, and Storage
    • 1015 Write Cycle Endurance
    • Radiation Resistant and Nonmagnetic
  • Intelligent Digital Peripherals
    • IR Modulation Logic
    • Two 16-Bit Timers With Three Capture/Compare Registers Each (Timer_A3)
    • One 16-Bit Counter-Only RTC Counter
    • 16-Bit Cyclic Redundancy Check (CRC)
  • Enhanced Serial Communications
    • Enhanced USCI A (eUSCI_A) Supports UART, IrDA, and SPI
    • Enhanced USCI B (eUSCI_B) Supports SPI and I2C
  • High-Performance Analog
    • 10-Channel 10-Bit Analog-to-Digital Converter (ADC)
      • Internal 1.5-V Reference
      • Sample-and-Hold 200 ksps
  • Clock System (CS)
    • On-Chip 32-kHz RC Oscillator (REFO)
    • On-Chip 16-MHz Digitally Controlled Oscillator (DCO) With Frequency Locked Loop (FLL)
      • ±1% Accuracy With On-Chip Reference at Room Temperature
    • On-Chip Very Low-Frequency 10-kHz Oscillator (VLO)
    • On-Chip High-Frequency Modulation Oscillator (MODOSC)
    • External 32-kHz Crystal Oscillator (XT1)
    • Programmable MCLK Prescalar of 1 to 128
    • SMCLK Derived From MCLK With Programmable Prescalar of 1, 2, 4, or 8
  • General Input/Output and Pin Functionality
    • Total 60 I/Os on 64-Pin Package
    • 16 Interrupt Pins (P1 and P2) Can Wake up MCU From LPMs
    • All I/Os are Capacitive Touch I/Os
  • Development Tools and Software
    • Free Professional Development Environments
  • Family Members
    • MSP430FR2033: 15KB of Program FRAM + 512B of Information FRAM + 2KB of RAM
    • MSP430FR2032: 8KB of Program FRAM + 512B of Information FRAM + 1KB of RAM
  • Package Options
    • 64 Pin: LQFP (PM)
    • 56 Pin: TSSOP (G56)
    • 48 Pin: TSSOP (G48)

詳細を表示

機能一覧 他の製品と比較 MSP430FRxx FRAM

 
CPU
Frequency (MHz)
Non-volatile Memory (KB)
RAM (KB)
GPIO Pins (#)
I2C
SPI
UART
DMA
ADC
Comparators (Inputs)
Timers - 16-bit
Timers - 32-bit
Multiplier
AES
BSL
Min VCC
Max VCC
Active Power (uA/MHz)
Standby Power (LPM3-uA)
Wakeup Time (us)
Additional Features
Special I/O
Rating
Operating Temperature Range (C)
Package Group
Package Size: mm2:W x L (PKG)
MSP430FR2033
MSP430   
16   
16   
2   
60   
1   
2   
1   
0   
ADC10 - 10ch   
0   
2   
0   
N/A   
N/A   
UART   
1.8   
3.6   
126   
1.31   
10   
Real-Time Clock
Watchdog
Temp Sensor
Brown Out Reset   
N/A   
Catalog   
-40 to 85   
LQFP
TSSOP   
48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)
56TSSOP: 113 mm2: 8.1 x 14(TSSOP)
64LQFP: 144 mm2: 12 x 12(LQFP)