PGA300 圧力センサ用の信号コンディショナおよびトランスミッタ

製品詳細

Number of input channels 2 Operating temperature range (°C) -40 to 150 Vs (min) (V) 3.3 Vs (max) (V) 30 Interface type 4-20mA, OWI, Ratiometric analog voltage Resolution (Bits) 16 Rating Military
Number of input channels 2 Operating temperature range (°C) -40 to 150 Vs (min) (V) 3.3 Vs (max) (V) 30 Interface type 4-20mA, OWI, Ratiometric analog voltage Resolution (Bits) 16 Rating Military
VQFN (RHH) 36 36 mm² 6 x 6
  • Analog features:
    • Analog front-end for resistive bridge sensors
    • Accommodates sensor sensitivities from 1 mV/V to 135 mV/V
    • On-chip temperature sensor
    • Programmable gain
    • 16-bit sigma-delta analog-to-digital converter for signal channel
    • 16-bit sigma-delta analog-to-digital converter for temperature channel
    • 14-bit output DAC
  • Digital Features:
    • <0.1% FSO accuracy across temperature
    • System response time <220 µs
    • Third-order temperature and nonlinearity compensation
    • Diagnostic functions
    • Integrated EEPROM for device operation, calibration data, and user data
  • Peripheral features:
    • One-wire interface enables communication through the power-supply pin
    • 4-mA to 20-mA current-loop output
    • Ratiometric and absolute voltage output
  • Power supply:
    • On-chip power management accepts wide power-supply voltage from 3.3 V to 30 V
    • Integrated reverse voltage protection circuit
  • Industrial temperature range: –40°C to +150°C
  • Analog features:
    • Analog front-end for resistive bridge sensors
    • Accommodates sensor sensitivities from 1 mV/V to 135 mV/V
    • On-chip temperature sensor
    • Programmable gain
    • 16-bit sigma-delta analog-to-digital converter for signal channel
    • 16-bit sigma-delta analog-to-digital converter for temperature channel
    • 14-bit output DAC
  • Digital Features:
    • <0.1% FSO accuracy across temperature
    • System response time <220 µs
    • Third-order temperature and nonlinearity compensation
    • Diagnostic functions
    • Integrated EEPROM for device operation, calibration data, and user data
  • Peripheral features:
    • One-wire interface enables communication through the power-supply pin
    • 4-mA to 20-mA current-loop output
    • Ratiometric and absolute voltage output
  • Power supply:
    • On-chip power management accepts wide power-supply voltage from 3.3 V to 30 V
    • Integrated reverse voltage protection circuit
  • Industrial temperature range: –40°C to +150°C

The PGA300 provides an interface for piezoresistive and strain-gauge pressure-sense elements. The device is a full system-on-chip (SoC) solution that incorporates a programmable analog front-end (AFE), ADC, and digital signal processing that enable direct connection to the sense element. Further, the PGA300 includes integrated voltage regulators and an oscillator, thus minimizing the number of external components. The device achieves high accuracy by employing third-order temperature and nonlinearity compensation. External communication is achieved by using a one-wire serial interface (OWI) through the power-supply pin in order to simplify the system calibration process. An Integrated DAC supports absolute-voltage, ratiometric-voltage, and 4-mA to
20-mA current-loop outputs.

The PGA300 provides an interface for piezoresistive and strain-gauge pressure-sense elements. The device is a full system-on-chip (SoC) solution that incorporates a programmable analog front-end (AFE), ADC, and digital signal processing that enable direct connection to the sense element. Further, the PGA300 includes integrated voltage regulators and an oscillator, thus minimizing the number of external components. The device achieves high accuracy by employing third-order temperature and nonlinearity compensation. External communication is achieved by using a one-wire serial interface (OWI) through the power-supply pin in order to simplify the system calibration process. An Integrated DAC supports absolute-voltage, ratiometric-voltage, and 4-mA to
20-mA current-loop outputs.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
16 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート PGA300 Signal Conditioner and Transmitter for Pressure Sensors データシート (Rev. B) PDF | HTML 2020年 6月 19日
アプリケーション・ノート Connecting PGA900 Instrumentation Amplifier to Resistive Bridge Sensor (Rev. A) 2019年 5月 23日
EVM ユーザー ガイド (英語) PGAxxxEVM-034 User’s Guide (Rev. B) 2018年 8月 1日
アプリケーション概要 圧力トランスミッタ・アプリケーション用のPGA900、PGA300、 PGA305の使用事例 英語版 2017年 6月 6日
アプリケーション概要 重量計(ロードセル)アプリケーション用のPGA900、PGA300、 PGA305の使用事例 英語版 2017年 6月 6日
アプリケーション概要 HVACアプリケーションでのPGA900、PGA300、PGA305の使用 事例 英語版 2017年 6月 5日
ユーザー・ガイド PGA300 GUI User's Guide 2016年 6月 17日
Analog Design Journal Analog Applications Journal 3Q 2015 2015年 7月 24日
Analog Design Journal Design tips for a resistive-bridge pressure sensor in industrial process-control 2015年 7月 24日
アプリケーション・ノート System Noise Analysis of a Resistive Bridge Pressure Sensor Connected to the PGA 2015年 7月 7日
アプリケーション・ノート Understanding Open Loop Output Impedance of the PGA900 DAC Gain Amplifier (Rev. A) 2015年 5月 19日
アプリケーション・ノート PGA900 as 4- to 20-mA Current Loop Transmitter 2015年 5月 7日
Analog Design Journal Analog Applications Journal 2Q 2015 2015年 4月 28日
Analog Design Journal Two-step calibration of sensor signal conditioners 2015年 4月 28日
アプリケーション・ノート Understanding Open Loop Gain of the PGA900 DAC Gain Amplifier 2015年 4月 2日
アプリケーション・ノート PGA900 DAC Output Stability Application Note 2015年 3月 4日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

PGA300EVM-034 — PGA300 圧力センサ・シグナル・コンディショナの EVM

The PGA300EVM allows evaluating all the features of the PGA300 in either voltage mode or current mode. The PGA300EVM has a resistive bridge on board with a potentiometer allowing for differential input voltages to be adjusted by the user to emulate a pressure sense element. The EVM also includes (...)
ユーザー ガイド: PDF
評価基板 (EVM) 向けの GUI

SLDC013 PGA300 GUI

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
シグナル・コンディショナ
PGA300 PGA300 圧力センサ用の信号コンディショナおよびトランスミッタ
ハードウェア開発
評価ボード
PGA300EVM-034 PGA300 圧力センサ・シグナル・コンディショナの EVM
シミュレーション・モデル

PGA900 PSpice Model

SLDM004.ZIP (167 KB) - PSpice Model
シミュレーション・モデル

PGA900 TINA-TI Reference Design, Current Mode

SLDM005.TSC (652 KB) - TINA-TI Reference Design
シミュレーション・モデル

PGA900 TINA-TI Reference Design, Voltage Mode

SLDM007.TSC (509 KB) - TINA-TI Reference Design
シミュレーション・モデル

PGA900 TINA-TI Spice Model

SLDM006.ZIP (5 KB) - TINA-TI Spice Model
リファレンス・デザイン

TIDA-00788 — IEC61000-4 試験済み、産業用電流出力圧力センサ・トランスミッタのリファレンス・デザイン

PGA300 は圧力センサ・システム向けの一体型システム・オン・チップ (SoC) であり、直線性を確保するために、圧力と温度に対する 3 次の補償アルゴリズムを活用します。また、PGA300 は 4 ~ 20mA 電流ループを駆動し、抵抗性ブリッジ・センサに対応する励起電圧を生成します。このリファレンス・デザインは高集積の PGA300 を採用しているので、精度と性能を犠牲にせずに、圧力センサのトランスミッタで使用する標準的な部品の点数とボード・サイズを最小化しています。また、このデザインは業界標準の IEC61000-4 が規定する EMC と EMI (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VQFN (RHH) 36 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ