TPA122
- 150-mW Stereo Output
- PC Power Supply Compatible
- Fully Specified for 3.3-V and 5-V Operation
- Operation to 2.5 V
- Pop Reduction Circuitry
- Internal Midrail Generation
- Thermal and Short-Circuit Protection
- Surface-Mount Packaging
- PowerPAD™ MSOP
- SOIC
- Pin Compatible With LM4880 and LM4881 (SOIC)
PowerPAD is a trademark of Texas Instruments.
The TPA122 is a stereo audio power amplifier packaged in either an 8-pin SOIC, or an 8-pin PowerPAD MSOP package capable of delivering 150 mW of continuous RMS power per channel into 8- loads. Amplifier gain is externally configured by means of two resistors per input channel and does not require external compensation for settings of 1 to 10.
THD+N when driving an 8- loads, the THD+N performance is 0.01% at 1 kHz, and less than 0.02% across the audio band of 20 Hz to 20 kHz.
技術資料
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
4 をすべて表示 種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TPA122: 150-mW Stereo Audio Power Amplifier データシート (Rev. E) | 2004年 6月 29日 | |||
アプリケーション・ノート | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018年 7月 6日 | ||||
アプリケーション・ノート | A Low-Cost, Single Coupling Capacitor Config. for Stereo Headphone Amplifiers | 1999年 12月 22日 | ||||
ユーザー・ガイド | TPA122MSOPEVM - User Guide | 1998年 8月 24日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
シミュレーション・ツール
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。
設計とシミュレーション向けの環境である PSpice for TI (...)
設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
HVSSOP (DGN) | 8 | オプションの表示 |
SOIC (D) | 8 | オプションの表示 |
購入と品質
記載されている情報:
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
記載されている情報:
- ファブの拠点
- 組み立てを実施した拠点