ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

TPS54061-Q1

アクティブ

車載カタログ、4.7V ~ 60V、200mA、同期整流降圧 DC/DC コンバータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LMR36503-Q1 アクティブ 車載向け、サイズと軽負荷効率に合わせて最適化済み、3V ~ 65V、0.3A 降圧コンバータ Smaller footprint, lower IQ and lower EMI.

製品詳細

Vin (min) (V) 4.7 Vin (max) (V) 60 Vout (min) (V) 0.8 Vout (max) (V) 58 Iout (max) (A) 0.2 Iq (typ) (mA) 0.09 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1100 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Synchronous Rectification, UVLO adjustable Operating temperature range (°C) -40 to 150 Rating Automotive Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
Vin (min) (V) 4.7 Vin (max) (V) 60 Vout (min) (V) 0.8 Vout (max) (V) 58 Iout (max) (A) 0.2 Iq (typ) (mA) 0.09 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1100 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Synchronous Rectification, UVLO adjustable Operating temperature range (°C) -40 to 150 Rating Automotive Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
VSON (DRB) 8 9 mm² 3 x 3
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C3B
  • Integrated High-Side and Low-Side MOSFETs
  • Diode Emulation for Light-Load Efficiency
  • Peak-Current Mode Control
  • 90-µA Operating Quiescent Current
  • 1.4-µA Shutdown Supply Current
  • 50-kHz to 1.1-MHz Adjustable Switching
    Frequency
  • Synchronizes to External Clock
  • 0.8 V ±1% Voltage Reference
  • Stable With Ceramic Output Capacitors or Low-
    Cost Aluminum Electrolytic
  • Cycle-by-Cycle Current Limit, Thermal, OVP, and
    Frequency Foldback Protection
  • 3-mm × 3-mm, 8-Pin SON Package With Thermal
    Pad
  • –40°C to 150°C Operating Junction Temperature
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C3B
  • Integrated High-Side and Low-Side MOSFETs
  • Diode Emulation for Light-Load Efficiency
  • Peak-Current Mode Control
  • 90-µA Operating Quiescent Current
  • 1.4-µA Shutdown Supply Current
  • 50-kHz to 1.1-MHz Adjustable Switching
    Frequency
  • Synchronizes to External Clock
  • 0.8 V ±1% Voltage Reference
  • Stable With Ceramic Output Capacitors or Low-
    Cost Aluminum Electrolytic
  • Cycle-by-Cycle Current Limit, Thermal, OVP, and
    Frequency Foldback Protection
  • 3-mm × 3-mm, 8-Pin SON Package With Thermal
    Pad
  • –40°C to 150°C Operating Junction Temperature

The TPS54061-Q1 device is a 60-V, 200-mA, synchronous step-down DC-DC converter with integrated high-side and low-side MOSFETs. Current-mode control provides simple external compensation and flexible component selection. The non-switching supply current is 90 µA. Using the enable pin reduces the shutdown supply current to 1.4 µA.

To increase light-load efficiency, the low-side MOSFET emulates a diode when the inductor current reaches zero.

The internal undervoltage lockout setting is 4.5 V, but using two resistors on the enable pin can increase the setting. The internal slow-start time controls the output-voltage start-up ramp.

The adjustable switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.

The TPS54061-Q1 enables small designs by integrating the MOSFETs and boot recharge diode, and by minimizing the IC footprint with a small 3-mm × 3-mm thermally-enhanced SON package.

The TPS54061-Q1 is supported in the WEBENCH™ Designer at www.ti.com.

The TPS54061-Q1 device is a 60-V, 200-mA, synchronous step-down DC-DC converter with integrated high-side and low-side MOSFETs. Current-mode control provides simple external compensation and flexible component selection. The non-switching supply current is 90 µA. Using the enable pin reduces the shutdown supply current to 1.4 µA.

To increase light-load efficiency, the low-side MOSFET emulates a diode when the inductor current reaches zero.

The internal undervoltage lockout setting is 4.5 V, but using two resistors on the enable pin can increase the setting. The internal slow-start time controls the output-voltage start-up ramp.

The adjustable switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.

The TPS54061-Q1 enables small designs by integrating the MOSFETs and boot recharge diode, and by minimizing the IC footprint with a small 3-mm × 3-mm thermally-enhanced SON package.

The TPS54061-Q1 is supported in the WEBENCH™ Designer at www.ti.com.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS54061-Q1 Wide-Input, 60-V, 200-mA Synchronous Step-Down DC–DC Converter With Low IQ データシート (Rev. A) PDF | HTML 2016年 1月 7日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

TPS54061 PSpice Transient Model

SLVM599.ZIP (49 KB) - PSpice Model
計算ツール

SLVC431 TPS54061 Design Excel Spreadsheet Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
降圧コンバータ (スイッチ内蔵)
TPS54061 低静止電流(IQ)の 4.7V ~ 60V 入力、200mA、同期整流降圧コンバータ TPS54061-Q1 車載カタログ、4.7V ~ 60V、200mA、同期整流降圧 DC/DC コンバータ
ハードウェア開発
評価ボード
TPS54061EVM-142 TPS54061 評価モジュール
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
VSON (DRB) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ