ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ SR (同期整流) と負荷共有コントローラ

UCC24636

アクティブ

超低スタンバイ電流、同期整流器コントローラ

製品詳細

Topology CCM, DCM UVLO thresholds on/off (V) 4/3.6 Switching frequency (max) (kHz) 130 Features 100uA standby current operation, Auto-detect standby mode, Synchronous Rectifier, Volt-second balancing Operating temperature range (°C) -40 to 125 Control mode Volt-sec balance Device type Controllers Rating Catalog
Topology CCM, DCM UVLO thresholds on/off (V) 4/3.6 Switching frequency (max) (kHz) 130 Features 100uA standby current operation, Auto-detect standby mode, Synchronous Rectifier, Volt-second balancing Operating temperature range (°C) -40 to 125 Control mode Volt-sec balance Device type Controllers Rating Catalog
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • Secondary-Side SR Controller Optimized for
    5-V to 24-V Output Discontinuous/Transition Mode
    Only Flyback Converters
  • Volt-Second Balance Control Enables Highest
    Rectifier Efficiency
  • Compatible with PSR and SSR Flyback
    Controllers
  • Ultra Low 110-µA Standby Current Consumption
  • Auto-Detect Standby Mode Disables SR Switching
    for Lower No-Load
    Power Consumption
  • SR Turn-Off Independent of RDSON and Parasitic
    Inductance
  • Operating Frequency Up to 130 kHz
  • Wide VDD Range from 3.6 V to 28 V
  • Adaptive Gate Drive Clamp
  • Open and Short Pin Fault Protection
  • Secondary-Side SR Controller Optimized for
    5-V to 24-V Output Discontinuous/Transition Mode
    Only Flyback Converters
  • Volt-Second Balance Control Enables Highest
    Rectifier Efficiency
  • Compatible with PSR and SSR Flyback
    Controllers
  • Ultra Low 110-µA Standby Current Consumption
  • Auto-Detect Standby Mode Disables SR Switching
    for Lower No-Load
    Power Consumption
  • SR Turn-Off Independent of RDSON and Parasitic
    Inductance
  • Operating Frequency Up to 130 kHz
  • Wide VDD Range from 3.6 V to 28 V
  • Adaptive Gate Drive Clamp
  • Open and Short Pin Fault Protection

The UCC24636 SR is a compact, 6-pin secondary-side synchronous rectifier MOSFET controller and driver for high efficiency Flyback converters operating in Discontinuous (DCM) and Transition mode (TM). Unlike traditional SR controllers which measure the SR MOSFET drain voltage, UCC24636 implements a volt-second balance control method to determine the turn off transition of the SR MOSFET; hence, SR conduction time is independent of the MOSFET RDSON, parasitic inductance or ringing allowing flexibility to designers in component slelction and PCB layout. This control method enables maximum SR conduction time and highest rectifier efficiency for a given MOSFET.

The controller has built in intelligence to detect converter no load operation and automatically enters standby mode. While in standby mode, it disables the SR MOSFET and lowers its bias supply current to 110µA to further reduce overall system standby power consumption. The wide VDD operating range for the controller allows direct bias from the converter output for fixed or variable output voltage designs. This eliminates the need for an auxilliary winding on the main transformer, which simplifies the circuit design and reduces the cost.

The UCC24636 SR is a compact, 6-pin secondary-side synchronous rectifier MOSFET controller and driver for high efficiency Flyback converters operating in Discontinuous (DCM) and Transition mode (TM). Unlike traditional SR controllers which measure the SR MOSFET drain voltage, UCC24636 implements a volt-second balance control method to determine the turn off transition of the SR MOSFET; hence, SR conduction time is independent of the MOSFET RDSON, parasitic inductance or ringing allowing flexibility to designers in component slelction and PCB layout. This control method enables maximum SR conduction time and highest rectifier efficiency for a given MOSFET.

The controller has built in intelligence to detect converter no load operation and automatically enters standby mode. While in standby mode, it disables the SR MOSFET and lowers its bias supply current to 110µA to further reduce overall system standby power consumption. The wide VDD operating range for the controller allows direct bias from the converter output for fixed or variable output voltage designs. This eliminates the need for an auxilliary winding on the main transformer, which simplifies the circuit design and reduces the cost.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
UCC24630 アクティブ 超低スタンバイ電流、同期整流器コントローラ The UCC24630 is optmized for CCM flyback designs

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
7 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC24636 Synchronous Rectifier (SR) Controller With Ultra-Low Standby Current データシート (Rev. A) PDF | HTML 2016年 3月 11日
アプリケーション・ノート UCC24630 and UCC24636 SR-Control Configurations Guide 2017年 12月 18日
アプリケーション・ノート Design UCC28704 With UCC24636 (PSR+SR) 2017年 1月 12日
技術記事 Biasing an SR controller IC in USB smartphone charging applications PDF | HTML 2016年 12月 8日
技術記事 USB chargers then and now: Type-C meets energy efficiency standards PDF | HTML 2016年 9月 23日
Analog Design Journal Agency requirements for stand-by power consumption w/ offline and PoL converters 2016年 1月 26日
EVM ユーザー ガイド (英語) Using the UCC24636EVM 2016年 1月 8日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

ドーター・カード

UCC24636EVM — UCC24636 同期整流器ドータ・ボード / 評価モジュール

The UCC24636EVM is a demonstration daughter board that allows quick installation into an existing DCM Flyback power supply to convert an output diode rectifier into a synchronous rectifier to improve efficiency. The board is programmed by the user and may be wired directly into the output stage, (...)
ユーザー ガイド: PDF
計算ツール

SLUC604 UCC24636 Design Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
SR (同期整流) と負荷共有コントローラ
UCC24636 超低スタンバイ電流、同期整流器コントローラ

多くの TI リファレンス デザインには、UCC24636 があります。

TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。

パッケージ ピン数 ダウンロード
SOT-23 (DBV) 6 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ