ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ 絶縁型 DC/DC コンバータとモジュール

UCC25230

アクティブ

12V ~ 105V 入力、0.2A 出力スイッチング・コンバータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM5168-Q1 アクティブ 車載対応、Fly-Buck™ 採用、6V ~ 120V の広い入力電圧範囲 (VIN)、300mA DC/DC コンバータ 120-V synchronous, flybuck or standard buck configuration.

製品詳細

Device type Converters Topology Buck, Flybuck Vin (min) (V) 12 Vin (max) (V) 75 Vout (min) (V) 8.5 Vout (max) (V) 9.5 Iout (max) (A) 0.2 Features Integrated Switch Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Control mode Feedforward, Voltage Rating Catalog
Device type Converters Topology Buck, Flybuck Vin (min) (V) 12 Vin (max) (V) 75 Vout (min) (V) 8.5 Vout (max) (V) 9.5 Iout (max) (A) 0.2 Features Integrated Switch Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Control mode Feedforward, Voltage Rating Catalog
VSON (DRM) 8 16 mm² 4 x 4
  • Highly Integrated Converter Operating as a Buck, or Isolated Forward-Flyback, Flybuck™
  • Wide Operating Input Voltage Range from 12 V to 100 V, 105-V Surge.
  • Up to 0.2-A Output Current
  • 9-V Always Available VDD Output with up to 2-mA Current Capability
  • Thermally Enhanced 4-mm x 4-mm SON-8/S-PVSON-N8 (DRM) Package
  • Internally Set Fixed 380-kHz Switching Frequency
  • Internal 2-ms Duration Soft Start
  • Voltage Mode Control with Input Feed Forward Allows Optimal Output Filter Design
  • 2% Accuracy Internal 2.5-V Reference
  • VDD UVLO
  • Cycle-by-Cycle Current Limit with Frequency Fold Back for Initial Start up Under High Capacitive Loads
  • Input UVLO and OVLO with Input Good Signal
  • Integrated 110-V, High and Low-Side Switches
  • Highly Integrated Converter Operating as a Buck, or Isolated Forward-Flyback, Flybuck™
  • Wide Operating Input Voltage Range from 12 V to 100 V, 105-V Surge.
  • Up to 0.2-A Output Current
  • 9-V Always Available VDD Output with up to 2-mA Current Capability
  • Thermally Enhanced 4-mm x 4-mm SON-8/S-PVSON-N8 (DRM) Package
  • Internally Set Fixed 380-kHz Switching Frequency
  • Internal 2-ms Duration Soft Start
  • Voltage Mode Control with Input Feed Forward Allows Optimal Output Filter Design
  • 2% Accuracy Internal 2.5-V Reference
  • VDD UVLO
  • Cycle-by-Cycle Current Limit with Frequency Fold Back for Initial Start up Under High Capacitive Loads
  • Input UVLO and OVLO with Input Good Signal
  • Integrated 110-V, High and Low-Side Switches

The UCC25230 is a highly integrated PWM converter operating as an isolated forward flyback. It has high-side and low-side power switches integrated and the control circuit with all key converter functions included. The power stage requires only one- or multiple winding coupled inductor and output capacitors for the complete solution. Voltage-mode feed-forward control with external compensation allows optimal output filter selection over wide input voltage range. The UCC25230 has fixed frequency set internally at 380 kHz. It also includes input voltage UVLO and OVLO comparators with hysteresis and input-good, open-collector output signal which can be used to enable PWM controllers.

UCC25230 is available in a thermally enhanced 8-pin SON package with PowerPad serving as a ground pin.

Other features include internal soft start and cycle-by-cycle current protection. Measured efficiency of isolated converter over input voltage and output current ranges are shown in .

The UCC25230 is a highly integrated PWM converter operating as an isolated forward flyback. It has high-side and low-side power switches integrated and the control circuit with all key converter functions included. The power stage requires only one- or multiple winding coupled inductor and output capacitors for the complete solution. Voltage-mode feed-forward control with external compensation allows optimal output filter selection over wide input voltage range. The UCC25230 has fixed frequency set internally at 380 kHz. It also includes input voltage UVLO and OVLO comparators with hysteresis and input-good, open-collector output signal which can be used to enable PWM controllers.

UCC25230 is available in a thermally enhanced 8-pin SON package with PowerPad serving as a ground pin.

Other features include internal soft start and cycle-by-cycle current protection. Measured efficiency of isolated converter over input voltage and output current ranges are shown in .

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
5 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート 12-V to 100-V Input, 0.2-A Output Switching Converter データシート (Rev. B) 2012年 4月 13日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート UCC25230 Bias Power-Supply Design Review 2012年 2月 23日
ユーザー・ガイド Using the UCC25230EVM-662 2012年 2月 7日
EVM ユーザー ガイド (英語) Using the UCC25230EVM-754 2011年 9月 28日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCD3138HSFBEVM-029 — UCD3138 ハード スイッチング フル ブリッジ コンバータの評価基板

TI (テキサス・インスツルメンツ) の UCD3138HSFBEVM-029 評価基板 (EVM) は、プログラマブル デジタル電源コントローラである UCD3138RHA をベースとする、デジタル制御のハード スイッチング フルブリッジ コンバータです。この評価基板 (EVM) は、48V 入力システム向けの設計を採用した、スタンドアロンの対称型ハード スイッチング フルブリッジ (HSFB) DC/DC パワー コンバータです。UCD3138HSFBEVM-029 は、36Vdc ~ 72Vdc の DC 入力で動作し、公称 12Vdc の出力電圧で、360W の全負荷出力電力、つまり (...)

ユーザー ガイド: PDF
シミュレーション・モデル

UCC25230 TINA-TI Transient Reference Design

SLUM299.TSC (399 KB) - TINA-TI Reference Design
シミュレーション・モデル

UCC25230 TINA-TI Transient Spice Model

SLUM300.ZIP (23 KB) - TINA-TI Spice Model
シミュレーション・モデル

UCC25230 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM240A.ZIP (49 KB) - PSpice Model
リファレンス・デザイン

PMP8877 — デジタル電源制御をベースとした、1/8 ブリック絶縁型 DC/DC テレコム パワー モジュールのリファレンス デザイン

PMP8877 は、UCD3138 デジタル電源コントローラをベースとした、フル機能の 1/8 ブリック絶縁型 DC/DC テレコム パワー モジュールです。このリファレンス デザインは、2 次側制御とハード スイッチング フルブリッジ パワー トポロジを採用しており、36V ~ 72V の幅広い入力電圧で動作し、12V/180W の出力電力を供給します。このリファレンス デザインの特長は、94% のピーク効率、入力電圧のサージに対する高速入力電圧フィードフォワード応答、定電流 / 定電力の過負荷保護、プリバイアス起動、並列モジュール アプリケーション向けの電流共有制御、PMBus (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP8878 — 1/8 ブリック絶縁 DC/DC テレコム電源モジュール、UCC28250 ベース

PMP8878 is a full-function 1/8th brick isolated DC/DC telecom power module based on UCC28250 advanced PWM controller. The reference design features secondary side control and hard switching full bridge power topology to deliver 12V/180W of output power operating across a wide range 40V-75V input (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VSON (DRM) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ