ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ フライバック・コントローラ

UCC28710

アクティブ

PSR (1 次側レギュレーション)、バレー・スイッチング機能、プログラマブル・ケーブル補償機能搭載、定電圧、定電流 PWM

製品詳細

Control mode Primary-side regulation UVLO thresholds on/off (V) 21/8 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 100 Features CC/CV output regulation, DCM, Green mode, High voltage startup, High-voltage startup, Input line monitor, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, PSR, Primary-side regulated, Soft start, Valley switching Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
Control mode Primary-side regulation UVLO thresholds on/off (V) 21/8 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 100 Features CC/CV output regulation, DCM, Green mode, High voltage startup, High-voltage startup, Input line monitor, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, PSR, Primary-side regulated, Soft start, Valley switching Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
SOIC (D) 7 29.4 mm² 4.9 x 6
  • < 10-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation Across Line and Load
  • 700-V Start-Up Switch
  • 100-kHz Maximum Switching Frequency Enables High-Power Density Charger Designs
  • Resonant Valley-Switching Operation for Highest Overall Efficiency
  • Frequency Jitter to Ease EMI Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Overvoltage, Low-Line, and Overcurrent Protection Functions
  • Programmable Cable Compensation (UCC28710)
  • NTC Resistor Interface (UCC28711, UCC28712 and UCC28713) with Fixed Cable Compensation Options
  • SOIC-7 Package
  • Create a Custom Design Using the UCC28710 With the WEBENCH® Power Designer
  • < 10-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation Across Line and Load
  • 700-V Start-Up Switch
  • 100-kHz Maximum Switching Frequency Enables High-Power Density Charger Designs
  • Resonant Valley-Switching Operation for Highest Overall Efficiency
  • Frequency Jitter to Ease EMI Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Overvoltage, Low-Line, and Overcurrent Protection Functions
  • Programmable Cable Compensation (UCC28710)
  • NTC Resistor Interface (UCC28711, UCC28712 and UCC28713) with Fixed Cable Compensation Options
  • SOIC-7 Package
  • Create a Custom Design Using the UCC28710 With the WEBENCH® Power Designer

The UCC2871x family of flyback power supply controllers provides isolated-output Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

An internal 700-V start-up switch, dynamically-controlled operating states and a tailored modulation profile support ultra-low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28710 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous conduction mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 100 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28710 allow the cable compensation to be programmed. The UCC28711, UCC28712 and UCC28713 devices allow remote temperature sensing using a negative temperature coefficient (NTC) resistor while providing fixed cable-compensation levels.

The UCC2871x family of flyback power supply controllers provides isolated-output Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

An internal 700-V start-up switch, dynamically-controlled operating states and a tailored modulation profile support ultra-low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28710 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous conduction mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 100 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28710 allow the cable compensation to be programmed. The UCC28711, UCC28712 and UCC28713 devices allow remote temperature sensing using a negative temperature coefficient (NTC) resistor while providing fixed cable-compensation levels.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
UCC28712 アクティブ PSR (1 次側レギュレーション)、バレー・スイッチング機能、NTC (負の温度係数) オプション、150mV ケーブル補償機能搭載、定電圧、定電流 PWM Cable compensation threshold is 150 mV

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
11 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC2871x Constant-Voltage, Constant-Current Controller With Primary-Side Regulation データシート (Rev. C) PDF | HTML 2017年 6月 30日
アプリケーション・ノート Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 2021年 8月 31日
その他の技術資料 PCB layout guidelines to optimize power supply performance 2021年 3月 23日
ホワイト・ペーパー Power Electronics in Motor Drives: Where is it? (Rev. A) 2019年 10月 1日
アプリケーション・ノート Minimize Standby Consumption for UCC287XX Family 2019年 8月 1日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート Troubleshooting TI PSR controllers 2016年 10月 3日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters 2015年 10月 2日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters (PPT) 2015年 10月 2日
技術記事 Designing multiple output converters with primary side sensing PDF | HTML 2015年 8月 4日
その他の技術資料 Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter 2013年 10月 29日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCC24630EVM-636 — UCC24630 65W AC/DC アダプタ

This is a high efficiency 65W AC/DC design using UCC24630 Synchronous Rectification Controller for a Universal input (85Vac to 265Vac) to 19.5V @3.33A output exceeding CoC-5 Tier2 and DOE Level VI performance requirements for external power supplies.

ユーザー ガイド: PDF
評価ボード

UCC28711EVM-160 — UCC28711 評価基板

The Texas Instruments UCC28711EVM-160 evaluation module (EVM) helps designers evaluate the performance of the UCC28711 Constant-Voltage, Constant-Current PWM with Primary-Side Regulation. The 5W EVM is used for evaluating an off line adapter for USB applications. It converts a 90V to 265V RMS (...)
ユーザー ガイド: PDF
評価ボード

UCC28720EVM-212 — UCC28720EVM-212 5W 評価基板、USB オフライン・アダプタ用

The UCC28720EVM-212 is a 5W evaluation module for evaluating an off line adapter for USB applications. It is intended for evaluation purposes and is not intended to be an end product. The UCC28720EVM-212 converters 100V to 240V RMS input voltage down to 5V DC, with a 1A current limit for USB (...)
ユーザー ガイド: PDF
評価ボード

UCC28740EVM-525 — UCC28740EVM-525 評価基板

UCC28740EVM-525 評価モジュールは、10W のオフライン不連続導通モード(DCM)フライバック・コンバータで、定電圧(CV)と定電流(CC)の出力レギュレーションを実現します。このモジュールは光カプラ・フィードバックを使用して厳格な電圧レギュレーションを行い、広い負荷ステップに対する過渡応答を改善するほか、1 次側制御を行って高精度の定電流レギュレーションを実現します。UCC28740 コントローラは、自らの制御アルゴリズムで周波数変調、1 次側ピーク電流変調、バレー・スイッチング、バレー・スキップを使用し、動作範囲全体で最大の効率を達成します。

ユーザー ガイド: PDF
シミュレーション・モデル

UCC2871x PSpice Transient Model

SLUM464.ZIP (17619 KB) - PSpice Model
シミュレーション・モデル

UCC2871x TINA-TI Transient Reference Design

SLUM539.TSC (224 KB) - TINA-TI Reference Design
シミュレーション・モデル

UCC2871x TINA-TI Transient Spice Model

SLUM538.ZIP (119 KB) - TINA-TI Spice Model
計算ツール

SLUC590 UCC2871x Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
フライバック・コントローラ
UCC28710 PSR (1 次側レギュレーション)、バレー・スイッチング機能、プログラマブル・ケーブル補償機能搭載、定電圧、定電流 PWM UCC28711 PSR (1 次側レギュレーション)、バレー・スイッチング機能、NTC (負の温度係数) オプション、0mV ケーブル補償機能搭載、定電圧、定電流 PWM UCC28712 PSR (1 次側レギュレーション)、バレー・スイッチング機能、NTC (負の温度係数) オプション、150mV ケーブル補償機能搭載、定電圧、定電流 PWM UCC28713 PSR (1 次側レギュレーション)、バレー・スイッチング機能、NTC (負の温度係数) オプション、300mV ケーブル補償機能搭載、定電圧、定電流 PWM

多くの TI リファレンス デザインには、UCC28710 があります。

TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。

パッケージ ピン数 ダウンロード
SOIC (D) 7 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ