ホーム パワー・マネージメント デジタル電源 IC デジタル電源絶縁型コントローラ

UCD3138A

アクティブ

UCD3138A 高集積デジタル・コントローラ、絶縁電源用

製品詳細

Number of outputs 8 Frequency (max) (MHz) 2 Number of ADC channels 14 Analog comparators 7 Communication interface 1 PMBUS, 2 UART Compensator 2-pole/2-zero (PID hardware) DPWM resolution (ps) 250 Number of GPIOs 30 Number of digital-power peripheral feedback loops 3 Nonvolatile memory (Byte) 2k (data), 32k (program) Processor 31.25MHz, 32-bit ARM7 Operating temperature range (°C) -40 to 125 Rating Catalog
Number of outputs 8 Frequency (max) (MHz) 2 Number of ADC channels 14 Analog comparators 7 Communication interface 1 PMBUS, 2 UART Compensator 2-pole/2-zero (PID hardware) DPWM resolution (ps) 250 Number of GPIOs 30 Number of digital-power peripheral feedback loops 3 Nonvolatile memory (Byte) 2k (data), 32k (program) Processor 31.25MHz, 32-bit ARM7 Operating temperature range (°C) -40 to 125 Rating Catalog
VQFN (RGC) 64 81 mm² 9 x 9 VQFN (RJA) 40 36 mm² 6 x 6 WQFN (RMH) 40 36 mm² 6 x 6
  • Digital Control of up to 3 Independent Feedback Loops
    • Dedicated PID-Based Hardware
    • 2-Pole, 2-Zero Configurable
    • Nonlinear Control
  • Soft-Start and Soft-Stop with and without Prebias
  • Fast Input Voltage Feed Forward Hardware
  • Synchronous Rectifier Dead Time Optimization Peripheral to Use with UCD7138 Synchronous Rectifier Driver
  • Up to 16 MHz Error Analog-to-Digital Converter (EADC)
    • Configurable Resolution as Small as 1 mV/LSB
    • Automatic Resolution Selection
    • Up to 8× Oversampling
    • Hardware-Based Averaging (up to 8×)
    • 10-Bit Effective DAC With 4 Bits of Dither
    • Adaptive Sample Trigger Positioning
  • Up to 8 High-Resolution Digital Pulse Width Modulated (DPWM) Outputs
    • 250-ps Pulse Width Resolution
    • 4-ns Frequency and Phase Resolution
    • Adjustable Phase-Shift Between Outputs
    • Adjustable Dead-band Between Pairs
    • Cycle-by-Cycle Duty Cycle Matching
    • Up to 2-MHz Switching Frequency
  • Configurable PWM Edge Movement
    • Trailing Modulation
    • Leading Modulation
    • Triangular Modulation
  • Configurable Feedback Control
    • Voltage Mode
    • Average Current Mode
    • Peak Current Mode Control
    • Constant Current
    • Constant Power
  • Configurable Modulation Methods
    • Frequency Modulation
    • Phase-Shift Modulation
    • Pulse Width Modulation
  • Fast, Automatic, and Smooth Mode Switching
    • Frequency Modulation and PWM
    • Phase-Shift Modulation and PWM
    • Frequency Modulation and Phase-Shift Modulation
  • High Efficiency and Light Load Management
    • Burst Mode
    • Ideal Diode Emulation
    • Synchronous Rectifier Soft On/Off
    • Low IC Standby Power
  • Primary Side Voltage Sensing
  • Copper Trace Current Sensing
  • Flux and Phase Current Balancing
  • Current Share Bus Support
    • Average or Master and Slave
  • Feature Rich Fault Protection Options
    • 7 High-Speed Analog Comparators
    • Cycle-by-Cycle Current Limiting
    • Programmable Fault
    • External Fault Capability
    • 10 Digital Comparators
    • Programmable Blanking Time
  • Synchronization of DPWM Waveforms Between Multiple UCD3138A devices
  • 14-Channel, 12-Bit, 267-ksps General-Purpose ADC
    • Programmable Averaging Filters
    • Dual Sample and Hold
  • Internal Temperature Sensor
  • Fully Programmable High-Performance 31.25-MHz, 32-Bit ARM7TDMI-S Processor
    • 32 KB of Program Flash
    • 2 KB of Data Flash with ECC
    • 4 KB of Data RAM
    • Firmware Boot-Load in the Field via PMBus or UART
  • Communication Peripherals
    • PMBus
    • 1 UART
  • UART Auto-baud Rate Adjustment
  • Timer Capture with Selectable Input Pins
  • Up to 5 Additional General Purpose Timers
  • Built In Watchdog: BOD and POR
  • 64-Pin QFN and 40-Pin QFN Package
  • Operating Temperature: –40°C to +125°C
  • Debug Interface
    • Code Composer Studio with JTAG Interface
    • Fusion Digital Power Designer GUI Support
  • Digital Control of up to 3 Independent Feedback Loops
    • Dedicated PID-Based Hardware
    • 2-Pole, 2-Zero Configurable
    • Nonlinear Control
  • Soft-Start and Soft-Stop with and without Prebias
  • Fast Input Voltage Feed Forward Hardware
  • Synchronous Rectifier Dead Time Optimization Peripheral to Use with UCD7138 Synchronous Rectifier Driver
  • Up to 16 MHz Error Analog-to-Digital Converter (EADC)
    • Configurable Resolution as Small as 1 mV/LSB
    • Automatic Resolution Selection
    • Up to 8× Oversampling
    • Hardware-Based Averaging (up to 8×)
    • 10-Bit Effective DAC With 4 Bits of Dither
    • Adaptive Sample Trigger Positioning
  • Up to 8 High-Resolution Digital Pulse Width Modulated (DPWM) Outputs
    • 250-ps Pulse Width Resolution
    • 4-ns Frequency and Phase Resolution
    • Adjustable Phase-Shift Between Outputs
    • Adjustable Dead-band Between Pairs
    • Cycle-by-Cycle Duty Cycle Matching
    • Up to 2-MHz Switching Frequency
  • Configurable PWM Edge Movement
    • Trailing Modulation
    • Leading Modulation
    • Triangular Modulation
  • Configurable Feedback Control
    • Voltage Mode
    • Average Current Mode
    • Peak Current Mode Control
    • Constant Current
    • Constant Power
  • Configurable Modulation Methods
    • Frequency Modulation
    • Phase-Shift Modulation
    • Pulse Width Modulation
  • Fast, Automatic, and Smooth Mode Switching
    • Frequency Modulation and PWM
    • Phase-Shift Modulation and PWM
    • Frequency Modulation and Phase-Shift Modulation
  • High Efficiency and Light Load Management
    • Burst Mode
    • Ideal Diode Emulation
    • Synchronous Rectifier Soft On/Off
    • Low IC Standby Power
  • Primary Side Voltage Sensing
  • Copper Trace Current Sensing
  • Flux and Phase Current Balancing
  • Current Share Bus Support
    • Average or Master and Slave
  • Feature Rich Fault Protection Options
    • 7 High-Speed Analog Comparators
    • Cycle-by-Cycle Current Limiting
    • Programmable Fault
    • External Fault Capability
    • 10 Digital Comparators
    • Programmable Blanking Time
  • Synchronization of DPWM Waveforms Between Multiple UCD3138A devices
  • 14-Channel, 12-Bit, 267-ksps General-Purpose ADC
    • Programmable Averaging Filters
    • Dual Sample and Hold
  • Internal Temperature Sensor
  • Fully Programmable High-Performance 31.25-MHz, 32-Bit ARM7TDMI-S Processor
    • 32 KB of Program Flash
    • 2 KB of Data Flash with ECC
    • 4 KB of Data RAM
    • Firmware Boot-Load in the Field via PMBus or UART
  • Communication Peripherals
    • PMBus
    • 1 UART
  • UART Auto-baud Rate Adjustment
  • Timer Capture with Selectable Input Pins
  • Up to 5 Additional General Purpose Timers
  • Built In Watchdog: BOD and POR
  • 64-Pin QFN and 40-Pin QFN Package
  • Operating Temperature: –40°C to +125°C
  • Debug Interface
    • Code Composer Studio with JTAG Interface
    • Fusion Digital Power Designer GUI Support

The UCD3138A is a digital power supply controller from Texas Instruments offering superior levels of integration and performance in a single-chip solution. The flexible nature of the UCD3138A makes it suitable for a wide variety of power conversion applications. In addition, multiple peripherals inside the device have been specifically optimized to enhance the performance of AC-DC and isolated DC-DC applications and reduce the solution component count in the IT and network infrastructure space.

The UCD3138A controller is a fully programmable solution offering customers complete control of their application, along with ample ability to differentiate their solution. At the same time, TI is committed to simplifying our customers' development effort by offering best-in-class development tools, including application firmware, Code Composer Studio™ software development environment, and TI’s power development GUI which lets customers configure and monitor key system parameters.

At the core of the UCD3138A controller are the digital control loop peripherals, also known as Digital Power Peripherals (DPPs). Each DPP implements a high-speed digital control loop consisting of a dedicated error analog-to-digital converter (EADC), a PID-based 2-pole-2-zero digital compensator and DPWM outputs with 250-ps pulse width resolution. The device also contains a 12-bit, 267-ksps general-purpose ADC with up to 14 channels, timers, interrupt control, PMBus, and UART communications ports. The device is based on a 32-bit ARM7TDMI-S RISC microcontroller that performs real-time monitoring, configures peripherals, and manages communications. The ARM microcontroller executes its program out of programmable flash memory as well as on-chip RAM and ROM.

In addition to the DPP, specific power management peripherals have been added to enable high efficiency across the entire operating range, high integration for increased power density, reliability, and lowest overall system cost and high flexibility with support for the widest number of control schemes and topologies. Such peripherals include: light load burst mode, synchronous rectification, automatic mode switching, input voltage feed forward, copper trace current sense, ideal diode emulation, constant current constant power control, synchronous rectification soft on and off, peak current mode control, flux balancing, secondary side input voltage sensing, high-resolution current sharing, hardware-configurable soft-start operation with pre-bias, as well as several other features. The device optimizes topology support for voltage mode and peak current mode controlled phase-shifted full bridge, single and dual phase PFC, bridge-less PFC, hard-switched full bridge and half bridge, and LLC half bridge and full bridge.

The UCD3139A is a functional variant of the UCD3138A Digital Power Controller that includes significant improvements over the UCD3138 device For a description of the complete changes made in the UCD3138A, refer to .

The UCD3138A is a digital power supply controller from Texas Instruments offering superior levels of integration and performance in a single-chip solution. The flexible nature of the UCD3138A makes it suitable for a wide variety of power conversion applications. In addition, multiple peripherals inside the device have been specifically optimized to enhance the performance of AC-DC and isolated DC-DC applications and reduce the solution component count in the IT and network infrastructure space.

The UCD3138A controller is a fully programmable solution offering customers complete control of their application, along with ample ability to differentiate their solution. At the same time, TI is committed to simplifying our customers' development effort by offering best-in-class development tools, including application firmware, Code Composer Studio™ software development environment, and TI’s power development GUI which lets customers configure and monitor key system parameters.

At the core of the UCD3138A controller are the digital control loop peripherals, also known as Digital Power Peripherals (DPPs). Each DPP implements a high-speed digital control loop consisting of a dedicated error analog-to-digital converter (EADC), a PID-based 2-pole-2-zero digital compensator and DPWM outputs with 250-ps pulse width resolution. The device also contains a 12-bit, 267-ksps general-purpose ADC with up to 14 channels, timers, interrupt control, PMBus, and UART communications ports. The device is based on a 32-bit ARM7TDMI-S RISC microcontroller that performs real-time monitoring, configures peripherals, and manages communications. The ARM microcontroller executes its program out of programmable flash memory as well as on-chip RAM and ROM.

In addition to the DPP, specific power management peripherals have been added to enable high efficiency across the entire operating range, high integration for increased power density, reliability, and lowest overall system cost and high flexibility with support for the widest number of control schemes and topologies. Such peripherals include: light load burst mode, synchronous rectification, automatic mode switching, input voltage feed forward, copper trace current sense, ideal diode emulation, constant current constant power control, synchronous rectification soft on and off, peak current mode control, flux balancing, secondary side input voltage sensing, high-resolution current sharing, hardware-configurable soft-start operation with pre-bias, as well as several other features. The device optimizes topology support for voltage mode and peak current mode controlled phase-shifted full bridge, single and dual phase PFC, bridge-less PFC, hard-switched full bridge and half bridge, and LLC half bridge and full bridge.

The UCD3139A is a functional variant of the UCD3138A Digital Power Controller that includes significant improvements over the UCD3138 device For a description of the complete changes made in the UCD3138A, refer to .

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
33 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCD3138A Highly-Integrated Digital Controller for Isolated Power データシート (Rev. E) PDF | HTML 2017年 1月 19日
アプリケーション・ノート Introduction to UCD3138x Devices PDF | HTML 2023年 12月 21日
アプリケーション・ノート Stack Overflow Detection on UCD3138 Devices PDF | HTML 2023年 9月 13日
アプリケーション・ノート Lockup Avoidance for UCD3138 Devices PDF | HTML 2023年 7月 3日
ユーザー・ガイド UCD31xx Technical Reference Manual (Rev. D) PDF | HTML 2020年 5月 28日
アプリケーション・ノート Fusion Digital Power Studio for UCD3138 Isolated Power Applications (Rev. C) 2019年 6月 24日
EVM ユーザー ガイド (英語) Using the UCD3138HSFBEVM-029 (Rev. A) 2019年 5月 8日
アプリケーション・ノート UCD3138 Family - Practical Design Guideline (Rev. B) 2018年 11月 20日
技術記事 The power to innovate industrial design PDF | HTML 2017年 3月 27日
アプリケーション・ノート CPU Lock-up Mechanisms in UCD31xx Devices 2017年 1月 24日
技術記事 Power Tips: How GaN devices boost resonant converter efficiency PDF | HTML 2016年 8月 25日
アプリケーション・ノート Migrating from the UCD3138 to UCD3138A (Rev. D) 2016年 4月 8日
EVM ユーザー ガイド (英語) Using the UCD3138ALLCEVM150 (Rev. A) 2016年 1月 14日
ユーザー・ガイド Bidirection DC-to-DC Converter User's Guide (Rev. A) 2015年 10月 27日
アプリケーション・ノート Using UCD7138 and UCD3138A for Advanced Synchronous Rectification Control (Rev. B) 2015年 10月 23日
技術記事 Are you ready for totem-pole PFC? PDF | HTML 2015年 10月 16日
技術記事 Designing a digital power supply: How to write firmware PDF | HTML 2015年 9月 1日
技術記事 Designing a digital-controlled power supply PDF | HTML 2015年 8月 12日
技術記事 Is your power supply smart enough to be cool PDF | HTML 2015年 5月 21日
EVM ユーザー ガイド (英語) Using the UCD3138ACCEVM149 2015年 2月 16日
アプリケーション・ノート UCD3138 Integral Branch of the PID Filter 2014年 10月 4日
アプリケーション・ノート Designing a UCD3138 Controlled Bridgeless PFC 2014年 4月 1日
アプリケーション・ノート Designing a UCD3138 Controlled Interleaved PFC 2014年 4月 1日
アプリケーション・ノート Designing a UCD3138 Controlled Single Phase PFC 2014年 3月 26日
アプリケーション・ノート UCD3138 PFC Tuning 2014年 3月 26日
EVM ユーザー ガイド (英語) Using the UCD3138PSFBEVM-027 2013年 8月 8日
Analog Design Journal Digital current balancing for an interleaved boost PFC 2013年 4月 16日
アプリケーション・ノート Evaluating UCD3138 in Interleave PFC or Bridgeless PFC Configurations 2013年 3月 18日
EVM ユーザー ガイド (英語) Using the UCD3138064EVM-166 2013年 3月 5日
EVM ユーザー ガイド (英語) Using the UCD3138OL40EVM-032 2013年 1月 4日
EVM ユーザー ガイド (英語) Using the UCD3138OL64EVM-031 2012年 8月 28日
ユーザー・ガイド Using the UCD3138PFCEVM-026 (Rev. B) 2012年 6月 8日
アプリケーション・ノート PFC THD Reduction and Efficiency Improvement by ZVS or Valley Switching 2012年 4月 26日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCD3138ALLCEVM150 — UCD3138A LLC 評価モジュール

The UCD3138ALLCEVM150 is an evaluation module (EVM) board, functioning as an LLC resonant half-bridge dc-dc converter and digitally controlled by control card UCD3138ACCEVM149. This EVM is used to evaluate digital power control using UCD3138A in LLC resonant half-bridge dc-dc conversion (...)

ユーザー ガイド: PDF
評価ボード

UCD3138HSFBEVM-029 — UCD3138 ハード スイッチング フル ブリッジ コンバータの評価基板

TI (テキサス・インスツルメンツ) の UCD3138HSFBEVM-029 評価基板 (EVM) は、プログラマブル デジタル電源コントローラである UCD3138RHA をベースとする、デジタル制御のハード スイッチング フルブリッジ コンバータです。この評価基板 (EVM) は、48V 入力システム向けの設計を採用した、スタンドアロンの対称型ハード スイッチング フルブリッジ (HSFB) DC/DC パワー コンバータです。UCD3138HSFBEVM-029 は、36Vdc ~ 72Vdc の DC 入力で動作し、公称 12Vdc の出力電圧で、360W の全負荷出力電力、つまり (...)

ユーザー ガイド: PDF
評価ボード

UCD3138OL40EVM-032 — UCD3138 40 ピン、開ループ デジタル電源コントローラの評価基板

UCD3138 は、絶縁型電源アプリケーション向けに最適化済みのデジタル コントローラです。UCD3138OL40EVM-032 評価基板 (EVM) は、この製品をスタンドアロンで評価する場合の使いやすいテスト プラットフォームを提供します。1 個の 40 ピン ソケットと一連の包括的なテスト ポイントを実装したこの評価基板 (EVM) を使用すると、ハードウェアとファームウェアのエンジニアは、デバイスのさまざまなピン上の信号を個別に操作し、開ループ動作を検討することができます。また、この評価基板 (EVM) には、シンプルな閉ループ制御構成を実現するフレキシビリティもあります (...)
ユーザー ガイド: PDF
評価ボード

UCD3138OL64EVM-031 — UCD3138 64 ピン、開ループ デジタル電源コントローラの評価基板

UCD3138 は、絶縁型電源アプリケーション向けに最適化済みのデジタル コントローラです。UCD3138OL64CEVM-031 評価基板 (EVM) は、この製品をスタンドアロンで評価する場合の使いやすいテスト プラットフォームを提供します。1 個の 64 ピン ソケットと一連の包括的なテスト ポイントを実装したこの評価基板 (EVM) を使用すると、ハードウェアとファームウェアのエンジニアは、デバイスのさまざまなピン上の信号を個別に操作し、開ループ動作を検討することができます。また、この評価基板 (EVM) には、シンプルな閉ループ制御構成を実現するフレキシビリティもあります (...)
ユーザー ガイド: PDF
評価ボード

UCD3138PFCEVM-026 — UCD3138 プログラマブル・デジタル・パワー・コントローラ評価モジュール

The Texas Instruments UCD3138PFCEVM-026 evaluation module (EVM) is a digitally controlled single phase PFC pre-regulator based on the UCD3138 programmable digital power controller. The EVM accepts universal ac line input from 90Vac to 264Vac, 47Hz to 63Hz. The nominal output voltage is 390VDC. (...)

ユーザー ガイド: PDF
評価ボード

UCD3138PSFBEVM-027 — UCD3138PSFBEVM-027 評価モジュール

This EVM, UCD3138PSFBEVM-027 is to help evaluate the UCD3138 64-pin digital control IC in an off-line power converter application and then to aid in its design. The EVM is a standalone phase-shifted full-bridge DC-DC power converter. The EVM is used together with its control card, (...)
ユーザー ガイド: PDF
ドーター・カード

UCD3138ACCEVM149 — UCD3138A 制御カード評価モジュール

テキサス・インスツルメンツの UCD3138ACCEVM149 評価基板(EVM)は、絶縁型電源アプリケーション用のデジタル・コントローラである TI 製 UCD3138A 用の制御カードとして機能します。この評価基板は、UCD3138A デバイスを研究するためのスタンドアロン・ボードとして、またはハーフ・ブリッジ共振 LLC などのトポロジーをベースとする完全安定化パワー・コンバータを実装するための制御カードとして使用することができます。評価基板に実装されている UCD3138A (...)

ユーザー ガイド: PDF
デバッグ・プローブ

TMDSEMU110-U — XDS110 JTAG デバッグ・プローブ

TI (テキサス・インスツルメンツ) の XDS110 は、TI の各種組込みプロセッサを意図した、新しいクラスのデバッグ・プローブ (エミュレータ) です。XDS110 は XDS100 ファミリを置き換える製品であり、同時に、単一製品で幅広い規格 (IEEE1149.1、IEEE1149.7、SWD) をサポートしています。すべての XDS デバッグ・プローブはまた、組込みトレース・バッファ (ETB) を搭載しているすべての Arm プロセッサと DSP プロセッサで、コア・トレースとシステム・トレースをサポートしています。ピン経由でコア・トレースを実行する場合、XDS560v2 (...)

ユーザー ガイド: PDF
デバッグ・プローブ

TMDSEMU560V2STM-U — XDS560™ ソフトウェア v2 システム・トレース USB デバッグ・プローブ

XDS560v2 は、XDS560™ ファミリのデバッグ・プローブの中で最高の性能を達成し、従来の JTAG 規格 (IEEE1149.1) と cJTAG (IEEE1149.7) の両方をサポートしています。シリアル・ワイヤ・デバッグ (SWD) をサポートしていないことに注意してください。

すべての XDS デバッグ・プローブは、組み込みトレース・バッファ (ETB) を搭載しているすべての ARM プロセッサと DSP プロセッサで、コア・トレースとシステム・トレースをサポートしています。ピン経由でコア・トレースを実行する場合、XDS560v2 PRO TRACE が必要です。

(...)

デバッグ・プローブ

TMDSEMU560V2STM-UE — Spectrum Digital XDS560v2 システム・トレース USB およびイーサネット

The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

アプリケーション・ソフトウェアとフレームワーク

FUSION_MFR_GUI — Fusion Digital Power 作成ツール

The Fusion Digital Power Manufacturing Tool (aka MFR GUI) is a Graphical User Interface used to download firmware, upgrade firmware, configure, calibrate and test .

The MFR GUI supports the same devices as Fusion Digital Power Designer software.  This tool is typically used in manufacturing (...)

アプリケーション・ソフトウェアとフレームワーク

UCD3138_FW_SDK — UCD3138 アプリケーション開発ファームウェア・キット

The UCD3138 firmware is a free software development kit for Texas Instruments’ UCD3138 integrated digital power controller family. It encompasses firmware development tools along with supporting collateral for the most popular power supply topologies for quicker evaluation and development of (...)
サンプル・コードまたはデモ

UCD-TRAINING-LABS UCD Training Labs

UCD3138 integrated digital power controller training labs provides quick start learning tool for getting acquainted with digital controller. UCD3138 integrated digital controller offers advanced Power Peripherals operating autonomous from the processor. Device includes advanced Protection features, (...)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION-DIGITAL-POWER-STUDIO Fusion Digital Power Studio
ファームウェア

UCD3138FW-BIDI Bi-Directional Firmware

UCD3138 non isolated bi-directional switching converter quickly gets a designer through evaluation to production in power supply designs based on a Wide Vin non isolated bi-directional topology by providing all-inclusive firmware with ZVS Transition mode support.

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION-DIGITAL-POWER-STUDIO Fusion Digital Power Studio
IDE (統合開発環境)、コンパイラ、またはデバッガ
CCSTUDIO Code Composer Studio™ 統合開発環境(IDE)
ファームウェア

UCD3138FW-FBLLC — フル・ブリッジ/位相シフト LLC ファームウェア、TIDA-00381 の UCD3138 用

UCD3138 Phase Shift  LLC quickly gets a designer through evaluation to production in power supply designs based on a resonant LLC topology by providing firmware with ZVS operation and mode switching capability to achieve high efficiency across wider operating conditions.

The resonant LLC topology (...)

ファームウェア

UCD3138FW-HSFB HSFB Firmware

UCD3138 Hard Switched Full Bridge (HSFB) topology firmware gets a designer through evaluation to production in power supply designs based on high power Hard Switched Full Bridge topology by providing all-inclusive firmware with input voltage feed forward, copper trace current sensing, on the fly (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138HSFBEVM-029 UCD3138 ハード スイッチング フル ブリッジ コンバータの評価基板
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION-DIGITAL-POWER-STUDIO Fusion Digital Power Studio
ファームウェア

UCD3138FW-PFC PFC Firmware

UCD3138 Power Factor Correction (PFC) firmware gets a designer through evaluation to production in power supply designs based on a PFC topology by providing all-inclusive firmware that can integrate easily with your housekeeping functionality.

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138PFCEVM-026 UCD3138 プログラマブル・デジタル・パワー・コントローラ評価モジュール
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
ファームウェア

UCD3138FW-PSFB Phase Shifted Full Bridge Firmware

UCD3138 Phase Shift Full Bridge quickly gets a designer through evaluation to production in power supply designs based on high power PSFB topology by providing all-inclusive firmware with peak current mode control support, adaptive dead time optimization and programmable slope compensation.

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138PSFBEVM-027 UCD3138PSFBEVM-027 評価モジュール
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
ファームウェア

UCD3138FW_LLC LLC Half bridge Firmware

UCD3138 Resonant LLC Programmer quickly gets a designer through evaluation to production in power supply designs based on a resonant LLC topology by providing  firmware with ZCS protection and mode switching capability to achieve high efficiency across wider operating conditions. The sunflower (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ハードウェア開発
評価ボード
UCD3138ALLCEVM150 UCD3138A LLC 評価モジュール
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
IDE (統合開発環境)、コンパイラ、またはデバッガ

CCSTUDIO Code Composer Studio 統合開発環境(IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications.  Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

こちらの設計リソースは、このカテゴリに属する製品の大半をサポートしています。

サポート状況を確認するには、製品の詳細ページをご覧ください。

開始 ダウンロードオプション
IDE (統合開発環境)、コンパイラ、またはデバッガ

FUSION_DIGITAL_POWER_API TI Fusion API

The Fusion Digital Power Studio is built on top of a Microsoft.NET Application Programming Interface (Fusion-API) that handles I2C/SMBus communication and abstracts devices and commands. It provides high level interfaces to common tasks such as command read/write, full device configuration (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
ソフトウェア
アプリケーション・ソフトウェアとフレームワーク
FUSION_DIGITAL_POWER_DESIGNER デジタル電源用ソフトウェア
ドライバまたはライブラリ
FUSION_DIGITAL_POWER_API Fusion Digital Power - API
ソフトウェア・プログラミング・ツール

UCD3PROG-FR03TXI0 — FlashRunner FR03 イン・システム・プログラマ

FlashRunnerTM FR03 is a high-performance, standalone In-System Programmer for Flash-based microcontrollers and serial memories. FlashRunnerTM FR03, which is targeted at production environments, easily interfaces to a programming system or Automatic Test Equipment (ATE) and can work either in full (...)
最低価格:SMH Technologies
サポート・ソフトウェア

FUSION-DIGITAL-POWER-STUDIO Fusion Digital Power Studio 3.0.77

Fusion Digital PowerTM Studio incorporates software tools for Texas Instruments' UCD3138 Integrated Digital Controller family.   Fusion Digital Power helps power supply engineers to gain benefits of digital power without learning complex programming skills. Fusion Digital Power is an intuitive (...)

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3020 完全プログラマブルなデジタル電源コントローラ、最大 2x 安定化出力および 6x DPWM 出力付 UCD3028 プログラマブルなデジタル・パワー・コントローラ、最大 2 つの安定化出力および 8 つの DPWM 出力付き UCD3040 プログラマブルなデジタル電源コントローラ、4x フィードバック・ループおよび 8x DPWM 出力付 UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
サポート・ソフトウェア

FUSION-PRODUCTION-GUI Fusion Digital Power Production Tool

The Fusion Digital Power Production Tool (production GUI) is a graphical user interface used to download firmware, upgrade firmware, configure, calibrate and test.  This command-based interface allows the seamless integration of UCD flashing procedures in a production environment.

The production GUI (...)
lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル電源絶縁型コントローラ
UCD3020 完全プログラマブルなデジタル電源コントローラ、最大 2x 安定化出力および 6x DPWM 出力付 UCD3028 プログラマブルなデジタル・パワー・コントローラ、最大 2 つの安定化出力および 8 つの DPWM 出力付き UCD3040 プログラマブルなデジタル電源コントローラ、4x フィードバック・ループおよび 8x DPWM 出力付 UCD3138 高集積デジタル・コントローラ、絶縁電源用、3 チャネル・フィードバック・ループ/ 8 チャネル DPWM 出力付 UCD3138064 絶縁電源向け、64kB メモリ搭載、高集積デジタル・コントローラ UCD3138064A 高集積デジタル・コントローラ、絶縁電源用 UCD3138128 高集積デジタル・コントローラ、絶縁電源用 UCD3138128A 絶縁電源向け、高集積デジタル・コントローラ UCD3138A UCD3138A 高集積デジタル・コントローラ、絶縁電源用 UCD3138A64 高集積デジタル・コントローラ、絶縁電源用
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)

多くの TI リファレンス デザインには、UCD3138A があります。

TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。

パッケージ ピン数 ダウンロード
VQFN (RGC) 64 オプションの表示
VQFN (RJA) 40 オプションの表示
WQFN (RMH) 40 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ