- DRV8x06x-Q1EVM & DRV8705x-Q1EVM User’s Guide
(PDF 2842 KB)
2019年 2月 6日 （英語）
- 技術資料をすべて表示 (3)
The DRV8705S-Q1EVM is designed to evaluate the DRV8705H-Q1, which is an integrated, automotive qualified brushed DC motor driver. The DRV8705S-Q1 is a highly integrated H-bridge gate driver, capable of driving high-side and low-side N-channel power MOSFETs. It generates the proper gate drive voltages using an integrated doubler charge pump for the high-side and a linear regulator for the low-side.
The device uses a smart gate drive architecture to reduce system cost and improve reliability. The gate driver optimizes dead time to avoid shoot-through conditions, provides control to decreasing electromagnetic interference (EMI) through adjustable gate drive current, and protects against drain to source and gate short conditions with VDS and VGS monitors.
A shunt amplifier provides low side current sensing to continuously measure motor current.
The DRV8705S-Q1 provide an array of protection features to ensure robust system operation. These include under and over voltage monitors for the power supply and charge pump, VDS overcurrent and VGS gate fault monitors for the external MOSFET, and internal thermal warning and shutdown protection.
The DRV8705S-Q1EVM has an H-bridge consisting of four N-channel MOSFETs that drive motors bi-directionally at up to 15-A RMS, 20-A peak current. The EVM operates from a single power supply for the analog power and from the USB line for the digital power, which can be customized to be externally supplied. A negative 18 V reverse baterry protection circuit, along with a 20 A RMS rated PI filter are provided to clean up the power supply input and protect against incorrect battery connections.
- H-bridge smart gate driver EVM for automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- 4.9-V to 37-V operating range
- Doubler charge pump for 100% PWM
- Half-bridge and H-bridge control modes
- SPI interface for simple configuration
- Smart gate drive architecture
- Adjustable slew rate control
- 1.0-mA to 62-mA peak source current output
- 1.0-mA to 62-mA peak sink current output
- Integrated dead-time handshaking
- MOSFET drain to source and gate monitors
- Current shunt amplifier
- Low side sensing
- Adjustable gain settings (10, 20, 40, 80 V/V)
- Integrated feedback resistors
- Integrated protection features
- Dedicated driver disable pin (DRVOFF)
- Supply and regulator undervoltage monitors
- MOSFET VDS overcurrent monitors
- MOSFET VGS gate fault monitors
- Charge pump for reverse polarity MOSFET
- Device thermal warning and shutdown
- Fault condition interrupt pin (n fault)