LM3492AR111DEMO
LM3492 AR111 LED バルブ代替リファレンス・ボード
LM3492AR111DEMO
概要
The LM3492 demonstration board included in this package is designed for converting nominal 12VAC from electronic transformer output to drive seven series connected LEDs at 360- mA average current. The end user can directly light up a LED string through the demonstration board from an electronic transformer to test out the performance. With the demonstration board, the LED string not only runs at a constant current but also flicker free operation. The LM3492 switching frequency is set at a nominal 1MHz. This is a two layer board using the top layer for component placement and both layers for trace routing. A bill of materials below describes the parts used on the demonstration board. A schematic and layouts have also been included below. For detailed information regarding the LM3492 device, please refer to the LM3492 data sheet.
特長
- Drop-in compatible with electronic transformers
- Excellent compatibility with various electronic transformers
- Regulated LED current
- Flicker free operation
照明 LED ドライバ
購入と開発の開始
LM3492AR111DEMO/NOPB — LM3492 AR111 LED バルブ代替リファレンス・ボード
技術資料
種類 | タイトル | 英語版のダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | アプリケーション・ノート | AN-2192 LM3492 12VAC, 7W LED Driver for AR111 Application (Rev. A) | 2013年 5月 1日 | |||
証明書 | LM3492AR111DEMO/NOPB EU Declaration of Conformity (DoC) | 2019年 1月 2日 | ||||
証明書 | LM3492AR111DEMO/NO EU Declaration of Conformity (DoC) | 2019年 1月 2日 |