PMP12003
0.65W、低消費電力、絶縁型フライバック・コンバータ・バイアス電源のリファレンス・デザイン
PMP12003
概要
PMP12003 is an isolated fly-buck-boost converter reference design with the primary side configured as an inverting buck-boost, using the LM5017 synchronous buck regulator IC. The design accepts an input voltage of 9Vin to 15Vin and provides an isolated output of 6.5Vout (+/-0.5V), capable of supplying 100mA of continuous current to the load. The nominal switching frequency of the design is 215KHz. This design is built on the PMP9291 Rev4 PCB, which is a 4-layer board with 1 oz. copper for the top and bottom layers and 0.5 oz. copper for the two inner layers.
特長
- Primary-to-secondary isolation
- Simple COT design requires no compensation
- No need for optocoupler
- Cycle-by-cycle current limit
出力電圧オプション | PMP12003.1 |
---|---|
Vin (Min) (V) | 9 |
Vin (Max) (V) | 15 |
Vout (Nom) (V) | 6.5 |
Iout (Max) (A) | .1 |
Output Power (W) | .65 |
Isolated/Non-Isolated | Isolated |
Input Type | DC |
Topology | FlyBuck |
組み立てられたボードは、テストと性能検証のみの目的で開発されたものであり、販売していません。
設計ファイルと製品
設計ファイル
すぐに使用できるシステム・ファイルをダウンロードすると、設計プロセスを迅速化できます。
TIDRU57.PDF (96 K)
設計に使用したコンポーネント、参照指定子、メーカー名や型番などを記入した詳細なリスト
技術資料
= TI が選択した主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
すべて表示 1
種類 | タイトル | 英語版のダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | 試験報告書 | PMP12003 Test Results | 2017年 12月 6日 |