バージョンを選択

バージョンを選択

結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。

TPSF12CX-MATHCAD

TPSF12C1/-Q1 and TPSF12C3/-Q1 common-mode AEF Mathcad design file

バージョンを選択
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
最新バージョン
バージョン: A1
リリース日: 01 3 2024

TPSF12C1/3 mathcad file

MD5 チェックサム
製品
電源フィルタ IC
TPSF12C1 単相システム向け、同相アクティブ EMI フィルタ (AEF) TPSF12C1-Q1 車載対応、単相システム向け、同相アクティブ EMI フィルタ (AEF) TPSF12C3 3 相システム向け、同相アクティブ EMI フィルタ (AEF) TPSF12C3-Q1 車載対応、3 相システム向け、同相アクティブ EMI フィルタ (AEF)
ハードウェア開発
評価ボード
TPSF12C1QEVM TPSF12C1-Q1 単相アクティブ EMI フィルタの評価基板 TPSF12C1EVM-FILTER TPSF12C1 単相アクティブ EMI フィルタの評価基板 TPSF12C3QEVM TPSF12C3-Q1 3 相アクティブ EMI フィルタの評価基板

リリース情報

This Mathcad worksheet is offered to predict the stability of a voltage-sense, current-inject active EMI filter (AEF) circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of AEF ICs, and to assist with component selection. The model is inclusive of most parasitc effects and can be used as a quick check of the loop gain and insertion loss prior to simulation, bench measurement and fine tuning.

 

The worksheet functions for single- and 3-phase AC systems and facilitates two ways of entering the CM choke parameters:

1. Using an equivalent circuit model with (a) resistive and capacitive parasitics –  suitable for ferrite-core chokes; (b) a ladder network of three parallel RL circuits -- suitable for nanocrystalline chokes

2. Using measured impedance data (magnitude and phase).

 

The worksheet is ideal for knowledge capture, unit-aware calculation reuse and for engineering collaboration amongst design, systems & application engineers.