注文
| 型番 | 供給状況 | 価格(米ドル) |
FUSION_DIGITAL_POWER_DESIGNER:
|
供給中 | 無償 |
概要
Fusion Digital Power Designer is the Graphical User Interface (GUI) used to configure and monitor select Texas Instruments digital power controllers and sequencer/health monitors. The application uses the PMBus protocol to communicate with the device over serial bus by way of a TI USB adapter.
Documentation on all Fusion tools is available at http://www.ti.com/fusiondocs.
特長
Some of the tasks you can perform with the GUI include:
- Turn on or off the power supply output, either through the hardware control line or the PMBus OPERATION command
- Monitor real-time data. Items such as input voltage, output voltage, output current, temperature, and warnings/faults are continuously monitored and displayed by the GUI.
- Configure the control law accelerator (CLA) coefficients through an interactive design tool
- Configure common operating characteristics such as Vout, warning and fault thresholds, and switching frequency
現在の更新情報
Latest Release:
- Fusion Digital Power Designer Version 1.8.211 [April 12, 2012]
- Fusion Digital Power Designer Version 1.8.206 [April 10, 2012]
- Fusion Digital Power Designer Version 1.8.184 [February 23, 2012]
- Fusion Digital Power Designer Version 1.8.157 [December 30, 2011]
- Fusion Digital Power Designer Version 1.8.140 [November 17, 2011]
- Fusion Digital Power Designer Version 1.8.95 [August 3, 2011]
- Fusion Digital Power Designer Version 1.8.80 [July 1, 2011]
- Fusion Digital Power Designer Version 1.8.58.1 [May 10, 2011]



