RFSTAR-3P-BLE-MOD

RF-star, third-party partner IDH of Texas Instruments for wireless connectivity modules for over a decade, is dedicated to supplying a wide range of wireless modules and solutions based on TI products, such as Bluetooth® Low Energy, Matter, ZigBee, Thread, Wi-Fi®, Sub-1 GHz and Wi-SUN.

RF-BM-2340Xx series wireless modules are all based on CC2340R5 SimpleLink wireless MCUs. All RF-star modules are embedded with the UART transparent transmission protocol. The rich AT commands enable the customers to shorten the development time, and the certifications make the costs lower and the release time of the end product faster.

RF-BM-2340B1 (PCB antenna) and RF-BM-2340B1I (IPEX version) are P2P compatible. 24 GPIOs are lead out for fast development and able to be regarded as the MCU modules with I2C, SPI and UART peripheral applications for medical, automobile, new energy, industry and so on.

RF-BM-2340A2 (PCB antenna) and RF-BM-2340A2I (IPEX version) are P2P compatible. 12 GPIOs with rich BLE5.2 serial port AT commands. The small size and the cost-competitive design enable the module feasible in many portable medical and consumer electronics applications.

RF-BM-2340C2 (chip antenna) Bluetooth LE module is with a compact size of 8 mm × 8 mm. The smallest size is designed to be easy to use for some applications with high requirements on dimension and require less transmission range.

特長

低消費電力 2.4GHz 製品