SLAAE59 may   2023 AFE539A4

 

  1.   Design Goals
  2.   Design Description
  3.   Design Notes
  4.   Testing Results
    1.     Measured Design Characteristics
  5.   Register Settings
  6.   Pseudo Code Example
  7.   Design Featured Devices
  8.   Design References

Design Goals

Key Input Parameter Key Output Signal Recommended Device
Temperature measured through NTC thermistor by ADC input Voltage output from DC/DC converter, 2.5 V to 9 V AFE539A4

Objective: Design a closed-loop system controlled by a smart AFE to control the temperature of a TEC by modifying the power output of a buck-boost converter.