JAJSGV3B September   2015  – January 2019 ADC31JB68

PRODUCTION DATA.  

  1. 1 特長
    1. 18 インチ / 5mil のFR4 マイクロストリップ・トレース出力の送信アイ、5Gb/s 時、ディエンファシスを最適化済み
  2. 2 アプリケーション
  3. 3 概要
    1.     -1dBFS、450MHz 入力でのスペクトル
  4. 4 改訂履歴
  5. 5 概要（続き）
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics: Converter Performance
    6. 7.6 Electrical Characteristics: Power Supply
    7. 7.7 Electrical Characteristics: Interface
    8. 7.8 Timing Requirements
    9. 7.9 Typical Characteristics
  8. 8 Parameter Measurement Information
    1. 8.1 Interface Circuits
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1  Analog Inputs and Input Buffer
      2. 9.3.2  Amplitude and Phase Imbalance Correction
      3. 9.3.3  Over-Range Detection
      4. 9.3.4  Input Clock Divider
      5. 9.3.5  SYSREF Detection Gate
      6. 9.3.6  Serial Differential Output Drivers
        1. 9.3.6.1 De-Emphasis Equalization
        2. 9.3.6.2 Serial Lane Inversion
      7. 9.3.7  ADC Core Calibration
      8. 9.3.8  Data Format
      9. 9.3.9  JESD204B Supported Features
      10. 9.3.10 JESD204B Interface
      11. 9.3.11 Transport Layer Configuration
        1. 9.3.11.1 Lane Configuration
        2. 9.3.11.2 Frame Format
        3. 9.3.11.3 ILA Information
      12. 9.3.12 Test Pattern Sequences
      13. 9.3.13 JESD204B Link Initialization
        1. 9.3.13.1 Frame Alignment
        2. 9.3.13.2 Code Group Synchronization
      14. 9.3.14 SPI
    4. 9.4 Device Functional Modes
      1. 9.4.1 Power-Down and Sleep Modes
    5. 9.5 Register Map
      1. 9.5.1 Register Descriptions
        1. 9.5.1.1  CONFIG_A (address = 0x0000) [reset = 0x3C]
          1. Table 6. CONFIG_A
        2. 9.5.1.2  DEVICE CONFIG (address = 0x0002) [reset = 0x00]
          1. Table 7. DEVICE CONFIG
        3. 9.5.1.3  CHIP_TYPE (address = 0x0003 ) [reset = 0x03]
          1. Table 8. CHIP_TYPE
        4. 9.5.1.4  CHIP_ID (address = 0x0005, 0x0004) [reset = 0x00, 0x1B]
          1. Table 9. CHIP_ID
        5. 9.5.1.5  CHIP_VERSION (address =0x0006) [reset = 0x00]
          1. Table 10. CHIP_VERSION
        6. 9.5.1.6  VENDOR_ID (address = 0x000D, 0x000C) [reset = 0x04, 0x51]
          1. Table 11. VENDOR_ID
        7. 9.5.1.7  SPI_CFG (address = 0x0010 ) [reset = 0x01]
          1. Table 12. SPI_CFG
        8. 9.5.1.8  OM1 (Operational Mode 1) (address = 0x0012) [reset = 0xC1]
          1. Table 13. OM1 (Operational Mode 1)
        9. 9.5.1.9  OM2 (Operational Mode 2) (address = 0x0013) [reset = 0x20]
          1. Table 14. OM2 (Operational Mode 2)
        10. 9.5.1.10 IMB_ADJ (Imbalance Adjust) (address = 0x0014) [reset = 0x00]
          1. Table 15. IMB_ADJ (Imbalance Adjust)
        11. 9.5.1.11 OVR_EN (Over-Range Enable) (address = 0x003A) [reset = 0x00]
          1. Table 16. OVR_EN (Over-Range Enable)
        12. 9.5.1.12 OVR_HOLD (Over-Range Hold) (address = 0x003B) [reset = 0x00]
          1. Table 17. OVR_HOLD (Over-Range Hold)
        13. 9.5.1.13 OVR_TH (Over-Range Threshold) (address = 0x003C) [reset = 0x00]
          1. Table 18. OVR_TH (Over-Range Threshold)
        14. 9.5.1.14 DC_MODE (DC Offset Correction Mode) (address = 0x003D) [reset = 0x00]
          1. Table 19. DC_MODE (DC Offset Correction Mode)
        15. 9.5.1.15 SER_CFG (Serial Lane Transmitter Configuration) (address = 0x0047) [reset = 0x00]
          1. Table 20. SER_CFG (Serial Lane Transmitter Configuration)
        16. 9.5.1.16 JESD_CTRL1 (JESD Configuration Control 1) (address = 0x0060) [reset = 0x7F]
          1. Table 21. JESD_CTRL1 (JESD Configuration Control 1)
        17. 9.5.1.17 JESD_CTRL2 (JESD Configuration Control 2) (address = 0x0061) [reset = 0x00]
          1. Table 22. JESD_CTRL2 (JESD Configuration Control 2)
        18. 9.5.1.18 JESD_RSTEP (JESD Ramp Pattern Step) (address = 0x0063, 0x0062) [reset = 0x00, 0x01]
          1. Table 23. JESD_RSTEP (JESD Ramp Pattern Step)
        19. 9.5.1.19 SER_INV (Serial Lane Inversion Control) (address = 0x0064) [reset = 0x00]
          1. Table 24. SER_INV (Serial Lane Inversion Control)
        20. 9.5.1.20 JESD_STATUS (JESD Link Status) (address = 0x006C) [reset = N/A]
          1. Table 25. JESD_STATUS (JESD Link Status)
  10. 10Application and Implementation
    1. 10.1 Application Information
      1. 10.1.1 Optimizing Converter Performance
        1. 10.1.1.1 Internal Noise Sources
        2. 10.1.1.2 External Noise Sources
      2. 10.1.2 Analog Input Considerations
        1. 10.1.2.1 Differential Analog Inputs and Full Scale Range
        2. 10.1.2.2 Analog Input Network Model
        3. 10.1.2.3 Input Bandwidth
        4. 10.1.2.4 Driving the Analog Input
        5. 10.1.2.5 Clipping and Over-Range
      3. 10.1.3 CLKIN, SYSREF, and SYNCb Input Considerations
        1. 10.1.3.1 Driving the CLKIN+ and CLKIN– Input
        2. 10.1.3.2 Driving the SYSREF Input
        3. 10.1.3.3 SYSREF Signaling
        4. 10.1.3.4 SYSREF Timing
        5. 10.1.3.5 Effectively Using the Detection Gate Feature
        6. 10.1.3.6 Driving the SYNCb Input
      4. 10.1.4 Output Serial Interface Considerations
        1. 10.1.4.1 Output Serial-Lane Interface
        2. 10.1.4.2 Voltage Swing and De-Emphasis Optimization
        3. 10.1.4.3 Minimizing EMI
      5. 10.1.5 JESD204B System Considerations
        1. 10.1.5.1 Frame and LMFC Clock Alignment Procedure
        2. 10.1.5.2 Link Interruption
        3. 10.1.5.3 Clock Configuration Examples
      6. 10.1.6 SPI
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Design Procedure
      3. 10.2.3 Application Curve
  11. 11Power Supply Recommendations
    1. 11.1 Power Supply Design
    2. 11.2 Decoupling
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13デバイスおよびドキュメントのサポート
    1. 13.1 関連資料
    2. 13.2 ドキュメントの更新通知を受け取る方法
    3. 13.3 コミュニティ・リソース
    4. 13.4 商標
    5. 13.5 静電気放電に関する注意事項
    6. 13.6 Glossary
  14. 14メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

7.9 Typical Characteristics

Typical values at TA = 25 °C, full temperature range is TMIN = –40 °C to TMAX = 85 °C, ADC sampling rate = 500 MSPS, 50% clock duty cycle, VA3.0 = 3.0 V, VA1.8 = 1.8 V, VA1.2 = VACLK1.2 = 1.2 V, –1 dBFS differential input (unless otherwise noted).
ADC31JB68 D015_SLASE60.gif
Figure 4. DNL vs Output Code
ADC31JB68 D017_SLASE60.gif
Figure 6. INL vs Supply
ADC31JB68 D002_SLASE60.gif
Figure 8. SNR, SINAD, SFDR vs Input Amplitude
ADC31JB68 D004_SLASE60.gif
Input Frequency = 210 MHz
Figure 10. SNR, SINAD, SFDR vs VA3.0 Supply
ADC31JB68 D042_SLASE60.gif
Input Frequency = 210 MHz
Figure 12. SNR, SINAD, SFDR vs VA1.2 Supply
ADC31JB68 D007_SLASE60.gif
Figure 14. HD2, HD3, SPUR, THD vs Input Frequency
ADC31JB68 D009_SLASE60.gif
Input Frequency = 210 MHz
Figure 16. HD2, HD3, SPUR, THD vs Sampling Rate
ADC31JB68 D020_SLASE60.gif
Figure 18. Output Spectrum, 1-Tone Test at 70 MHz
ADC31JB68 D022_SLASE60.gif
Figure 20. Output Spectrum, 1-Tone Test at 450 MHz
ADC31JB68 D025_SLASE60.gif
Figure 22. Supply Power and Current vs Temperature
ADC31JB68 ADC31JB68_TXeye_3in_VOD1_DEM0_slase60.png
5-mil. FR4 Microstrip Trace at 5 Gb/s with No De-Emphasis
Figure 24. Transmitted Eye at Output of 3-Inch
ADC31JB68 D016_SLASE60.gif
Figure 5. INL vs Output Code
ADC31JB68 D001_SLASE60.gif
Figure 7. SNR, SINAD, SFDR vs Input Frequency
ADC31JB68 D003_SLASE60.gif
Input Frequency = 210 MHz
Figure 9. SNR, SINAD, SFDR vs Sampling Rate (FS)
ADC31JB68 D041_SLASE60.gif
Input Frequency = 210 MHz
Figure 11. SNR, SINAD, SFDR vs VA1.8 Supply
ADC31JB68 D005_SLASE60.gif
Input Frequency = 210 MHz
Figure 13. SNR, SINAD, SFDR vs Temperature
ADC31JB68 D008_SLASE60.gif
Input Frequency = 210 MHz
Figure 15. HD2, HD3, SPUR, THD vs Input Amplitude
ADC31JB68 D011_SLASE60.gif
Input Frequency = 210 MHz
Figure 17. HD2, HD3, SPUR, THD vs Temperature
ADC31JB68 D021_SLASE60.gif
Figure 19. Output Spectrum, 1-Tone Test at 210 MHz
ADC31JB68 D023_SLASE60.gif
Input Amplitude = –7 dBFS/Tone
Figure 21. Output Spectrum, 2-Tone Test at 200 MHz and 210 MHz
ADC31JB68 D026_SLASE60.gif
Figure 23. Supply Power and Current vs Sampling Rate
ADC31JB68 ADC31JB68_TXeye_18in_VOD7_DEM6_slase60.png
5-mil. FR4 Microstrip Trace at 5 Gb/s with Optimized De-Emphasis
Figure 25. Transmitted Eye at Output of 18-Inch